MATERIAL SAFETY DATA SHEET



                               Goo Systems.

                              4 Harvey St. #60

                             Kingston, Ontario

                                 K7K 5B9

              Phone (613) 541-0299          Fax (613) 541-1765







               SECTION # 1: PRODUCT IDENTIFICATION



Product Identifier:          Screen Goo Ultra Silver 3D Topcoat

Product Use:                 Video Projection Screen Paint

Whmis Classification:        Not Controlled.

MSDS Preparation Date:       21 September 2005







                SECTION 2: HAZARDS IDENTIFICATION



Screen Goo Ultra Silver 3D topcoat contains ingredients found in the Whmis Ingredient

Disclosure List:



INGREDIENTS                  %Wt/Wt         C.A.S.#        TLV            LD50 (g/KG)

P(BA/MMA)                    17.4 � 32.1    25852-37-3     NA             NA

Propylene Glycol             1.0 - 2.5      57-55-6        NA             20 (RAT)

Texanol                      0.5 - 1.5      25265-77-4     NA             < 3.2 (RAT)





In addition, some paints contain product specific compounds that have been identified in

the Ingredient Disclosure List:



Products/ Ingredients        %Wt/Wt         C.A.S.#        TLV            LD50 (g/KG)







Screen Goo Ultra Silver 3D topcoat



Mica                         8.0 - 12.0     12001-26-2     5 mg/m3        5 (RAT)

Molybdenum Disulfide         1.0 % Max.                    NA             NA



NOTES: NA = NOT AVAILABLE

                        SECTION 3: PHYSICAL DATA





Physical State:        White or Colored Paste; White or Coloured Liquid

Odor:                  Very Mild Ammonia Odor

Specific Gravity:      1.0 - 1.7     (Water = 1.0)

Boiling Range:         100 - 130 Deg. C

Solubility in Water:   Dilutable





         SECTION 4: FIRE AND EXPLOSION HAZARD DATA



Flammability Classification:                 Not Applicable

Flash Point:                                 Not Combustible

Flammable Limits (% vol. in air):            LEL: N. App.    UEL: N. App.

Extinguishing Media:                         Not Applicable.



Special Fire Fighting Procedures: Material in paint can splatter above 100C. Dried

paint film can burn. If this should occur use carbon dioxide, foam, dry chemical or water

to extinguish. Wear full-body protective clothing and self-contained breathing apparatus.

Do not direct extinguishing media directly into center of burning pools.





                          SECTION 5: REACTIVITY DATA



Stability:             Stable



                       Maintain storage between 0 and 30 oC. Avoid strong oxidizing and

Incompatibility:

                       reducing agents; strong acids and bases. Keep product away from

                       open flame.



Conditions to Avoid: Keep product from freezing or excessive heat.



Hazardous Decomposition Products:            Low molecular weight hydrocarbons, CO,

                                             CO2, NOx. All are toxic.

                      SECTION 6: HEALTH HAZARDS



Inhalation:    Pigment powders in this paint are not in the form of respirable dusts,

               hence they do not pose the hazards associated with the inhalation of fine

               mineral particles. Sanding of dried paint surfaces may result in these

               pigments becoming airborne and causing respiratory irritation. Under

               spray painting conditions, exposure may cause respiratory irritation.



Eye Contact: Prolonged or repeated contact may result in eye irritation.



Skin Contact: Prolonged or repeated contact may result in skin irritation.



Ingestion:     May cause irritation to the gastrointestinal system.



Additional Exposure Information: Existing skin, eye, or respiratory conditions may

                                 be aggravated by exposure.









 SECTION 7: EXPOSURE CONTROL/PERSONAL PROTECTION



Respiratory Protection:       If spray painting or sanding, wear appropriate government

                              approved mask. Ensure room as adequate ventilation.



Ventilation:                  For professional (daily) use adequate ventilation is

                              recommended, (i.e. window fan).



Eye Protection:               Wear safety glasses (with side shields) or goggles.



Skin Protection:              Gloves are recommended.

                    SECTION 8: FIRST AID PROCEDURES



Eye Contact:          Flush with clean water for a minimum of 15 minutes. See a

                      physician after flushing eyes.



Skin Contact:         Wash hands with soap and water. If irritation develops see a

                      physician.



Inhalation:           Remove subject to fresh air.



Ingestion:            May cause abdominal pain. Do not induce vomiting. Product is not

                      considered toxic in small amounts. Call a physician. Ingestion of

                      large amounts may require medical attention.





      SECTION 9: HANDLING AND STORAGE PRECAUTIONS



Storage of Paint:            Keep from freezing. Keep containers closed.



Spill/ Leak Procedure:       Contain spilled paint and clean up. Avoid excessive

                             inhalation and skin contact.



Paint Disposal:              Dispose of paint soaked rags and empty containers in

                             accordance with regulatory laws.







                    SECTION 10: OTHER INFORMATION



While Goo Systems. has prepared this MSDS from knowledge of the

products' components and from supplier information, there is no warranty

with respect to the accuracy of this data. We assume no legal responsibility.

All data is offered for your consideration, investigation and verification.