Product Name: Farmoz Amplify Spray Tank Adjuvant
Page: 1 of 5
This revision issued: December, 2006
Section 1 - Identification of Chemical Product and Company
Farmoz Pty Ltd, Suite 1, Level 4, Building B Telephone (02)9431 7800 (24 hours)
207 Pacific Highway St Leonards, NSW 2068 Fax (02)9431 7700
ACN 050 328 973
Substance: Blend of mineral oil, surfactant and other minor ingredients.
Farmoz Amplify Spray Tank Adjuvant
Trade Name:
Product Use: Spray tank adjuvant.
Creation Date: December, 2006
Revision Date: December, 2006
Section 2 - Hazards Identification
Statement of Hazardous Nature
This product is classified as: Hazardous according to the criteria of ASCC.
Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code. However, this is a C1
Combustible Liquid and for storage meets the definition of Dangerous Goods.
Risk Phrases: R41, R66. Risk of serious damage to eyes. Repeated exposure may cause skin dryness or cracking.
Safety Phrases: S2, S13, S25, S26, S36/39. Keep out of reach of children. Keep away from food, drink and animal
feeding stuffs. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and
contact a doctor or Poisons Information Centre. Wear suitable protective clothing and eye/face protection.
SUSDP Classification: S5
ADG Classification: None allocated. Not a Dangerous Good under the ADG Code.
UN Number: None allocated
Emergency Overview
Physical Description & colour: Clear yellow liquid.
Odour: Sweet odour.
Major Health Hazards: may cause serious damage to eyes.
Potential Health Effects
Inhalation:
Short term exposure: Available data indicates that this product is not harmful. However product may be mildly
irritating, although unlikely to cause anything more than mild transient discomfort.
Long Term exposure: No data for health effects associated with long term inhalation.
Skin Contact:
Short term exposure: Available data indicates that this product is not harmful. It should present no hazards in
normal use. However product may be irritating, but is unlikely to cause anything more than mild transient discomfort.
Long Term exposure: No data for health effects associated with long term skin exposure.
Eye Contact:
Short term exposure: This product is a severe eye irritant. Symptoms may include stinging and reddening of eyes
and watering which may become copious. Other symptoms such as swelling of eyelids and blurred vision may also
become evident. If exposure is brief, symptoms should disappear once exposure has ceased. However, lengthy
exposure or delayed treatment is likely to cause permanent damage.
Long Term exposure: No data for health effects associated with long term eye exposure.
Ingestion:
Short term exposure: Significant oral exposure is considered to be unlikely. However, this product is believed to
be mildly irritating to mucous membranes but is unlikely to cause anything more than mild transient discomfort.
Long Term exposure: No data for health effects associated with long term ingestion.
Carcinogen Status:
ASCC: Mineral Oil is classified by ASCC as a Class 2 Carcinogen, likely to be carcinogenic to humans.
See the ASCC website for further details. A web address has not been provided as addresses frequently change.
NTP: No significant ingredient is classified as carcinogenic by NTP.
IARC: No significant ingredient is classified as carcinogenic by IARC.
MATERIAL SAFETY DATA SHEET
Issued by: Farmoz Pty Ltd Phone: (02)9431 7800
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Product Name: Farmoz Amplify Spray Tank Adjuvant
Page: 2 of 5
This revision issued: December, 2006
Section 3 - Composition/Information on Ingredients
TWA (mg/m3) STEL (mg/m3)
Ingredients CAS No Conc,%
Mineral oil 64742-56-9 432g/L not set not set
Nonionic surfactants 10-30 not set not set
Other non hazardous ingredients 10-30 not set not set
This is a commercial product whose exact ratio of components may vary slightly. Minor quantities of other non
hazardous ingredients are also possible.
The ASCC TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day
for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that may be equalled (but should not be exceeded) for no
longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures
at the STEL. The term "peak "is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.
Section 4 - First Aid Measures
General Information:
You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by
this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all
times. Have this MSDS with you when you call.
Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
Skin Contact: Wash gently and thoroughly with water (use non-abrasive soap if necessary) for 5 minutes or until
chemical is removed.
Eye Contact: Immediately flush the contaminated eye(s) with lukewarm, gently flowing water for 20 minutes or until
the product is removed, while holding the eyelid(s) open. Take care not to rinse contaminated water into the
unaffected eye or onto the face. Obtain medical attention immediately. Take special care if exposed person is wearing
contact lenses.
Ingestion: If product is swallowed or gets in mouth, do NOT induce vomiting; wash mouth with water and give some
water to drink. If symptoms develop, or if in doubt contact a Poisons Information Centre or a doctor.
Section 5 - Fire Fighting Measures
Fire and Explosion Hazards: This product is classified as a C1 combustible product. There is no risk of an
explosion from this product under normal circumstances if it is involved in a fire. Violent steam generation or eruption
may occur upon application of direct water stream on hot liquids.
Fire decomposition products from this product may be toxic if inhaled. Take appropriate protective measures.
Extinguishing Media: Preferred extinguishing media are carbon dioxide, dry chemical, foam, water fog.
Fire Fighting: If a significant quantity of this product is involved in a fire, call the fire brigade.
Flash point: Combustible but does not meet the AS 1940 definition of a Flammable Liquid.
Upper Flammability Limit: No data.
Lower Flammability Limit: No data.
Autoignition temperature: No data.
Flammability Class: C1
Section 6 - Accidental Release Measures
Accidental release: In the event of a major spill, prevent spillage from entering drains or water courses. Wear full
protective chemically resistant clothing including eye/face protection, gauntlets and self contained breathing
apparatus. See below under Personal Protection regarding Australian Standards relating to personal protective
equipment. Suitable materials for protective clothing include rubber, PVC. Eye/face protective equipment should
comprise as a minimum, protective goggles. If there is a significant chance that vapours or mists are likely to build up
in the cleanup area, we recommend that you use a respirator. Usually, no respirator is necessary when using this
product. However, if you have any doubts consult the Australian Standard mentioned below (section 8).
Stop leak if safe to do so, and contain spill. Absorb onto sand, vermiculite or other suitable absorbent material. If spill
is too large or if absorbent material is not available, try to create a dike to stop material spreading or going into drains
or waterways. Sweep up and shovel or collect recoverable product into labelled containers for recycling or salvage,
and dispose of promptly. Can be slippery on floors, especially when wet. Recycle containers wherever possible after
careful cleaning. After spills, wash area preventing runoff from entering drains. If a significant quantity of material
enters drains, advise emergency services. This material may be suitable for approved landfill. Ensure legality of
disposal by consulting regulations prior to disposal. Thoroughly launder protective clothing before storage or re-use.
Advise laundry of nature of contamination when sending contaminated clothing to laundry.
MATERIAL SAFETY DATA SHEET
Issued by: Farmoz Pty Ltd Phone: (02)9431 7800
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Product Name: Farmoz Amplify Spray Tank Adjuvant
Page: 3 of 5
This revision issued: December, 2006
Section 7 - Handling and Storage
Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check
Section 8 of this MSDS for details of personal protective measures, and make sure that those measures are followed.
The measures detailed below under "Storage" should be followed during handling in order to minimise risks to
persons using the product in the workplace. Also, avoid contact or contamination of product with incompatible
materials listed in Section 10.
Storage: Note that this product is combustible and therefore, for Storage, meets the definition of Dangerous Goods
in some states. If you store large quantities (tonnes) of such products, we suggest that you consult your state's
Dangerous Goods authority in order to clarify your obligations regarding their storage.
Store packages of this product in a cool place. Make sure that containers of this product are kept tightly closed. Keep
containers of this product in a well ventilated area. Protect this product from light. Make sure that the product does not
come into contact with substances listed under "Incompatibilities" in Section 10. Some liquid preparations settle or
separate on standing and may require stirring before use. Check packaging - there may be further storage
instructions on the label.
Section 8 - Exposure Controls and Personal Protection
The following Australian Standards will provide general advice regarding safety clothing and equipment:
Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Industrial Clothing: AS2919, Industrial Eye
Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210.
TWA (mg/m3) STEL (mg/m3)
ASCC Exposure limits
Exposure limits have not been established by ASCC for any of the significant ingredients in this product.
No special equipment is usually needed when occasionally handling small quantities. The following instructions are
for bulk handling or where regular exposure in an occupational setting occurs without proper containment systems.
Ventilation: No special ventilation requirements are normally necessary for this product. However make sure that
the work environment remains clean and that vapours and mists are minimised.
Eye Protection: Protective glasses or goggles must be worn when this product is being used. Failure to protect
your eyes may lead to severe harm to them or to general health. Emergency eye wash facilities must also be
available in an area close to where this product is being used.
Skin Protection: You should avoid contact even with mild skin irritants. Therefore you should wear suitable
impervious elbow-length gloves and facial protection when handling this product. See below for suitable material
types.
Protective Material Types: We suggest that protective clothing be made from the following materials: rubber,
PVC.
Respirator: Usually, no respirator is necessary when using this product. However, if you have any doubts consult
the Australian Standard mentioned above.
Eyebaths or eyewash stations and safety deluge showers should be provided near to where this product is being
used.
Section 9 - Physical and Chemical Properties:
Physical Description & colour: Clear yellow liquid.
Odour: Sweet odour.
Boiling Point: Not available.
Freezing/Melting Point: No specific data. Liquid at normal temperatures.
Volatiles: No data.
Vapour Pressure: No data.
Vapour Density: No data.
Specific Gravity: 0.871
Water Solubility: Dispersible.
pH: No data.
Volatility: No data.
Odour Threshold: No data.
Evaporation Rate: No data.
Coeff Oil/water distribution: No data
Autoignition temp: No data.
Section 10 - Stability and Reactivity
Reactivity: This product is unlikely to react or decompose under normal storage conditions. However, if you have
any doubts, contact the supplier for advice on shelf life properties.
MATERIAL SAFETY DATA SHEET
Issued by: Farmoz Pty Ltd Phone: (02)9431 7800
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Product Name: Farmoz Amplify Spray Tank Adjuvant
Page: 4 of 5
This revision issued: December, 2006
Conditions to Avoid: This product should be kept in a cool place, preferably below 30掳C. Keep containers tightly
closed. Keep containers and surrounding areas well ventilated. Protect this product from light.
Incompatibilities: strong oxidising agents.
Fire Decomposition: Carbon dioxide, and if combustion is incomplete, carbon monoxide and smoke. Water.
Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision,
disturbance of judgment, and unconsciousness followed by coma and death.
Polymerisation: This product will not undergo polymerisation reactions.
Section 11 - Toxicological Information
Toxicity: A summary of white spirit type hydrocarbons can be found at
http://www.inchem.org/documents/ehc/ehc/ehc187.htm
Ingestion of white spirit has been reported to produce gastrointestinal irritation with pain, vomiting and diarrhoea.
Lesions of the mucous membranes in the oesophagus and the gastrointestinal tract followed the oral exposure.
Owing to its low viscosity and low surface tension, white spirit poses a risk of aspiration into the lungs following oral
exposure. A few ml of solvent aspirated into the lungs are able to produce serious bronchopneumonia and 10-30ml
may be fatal.
Prolonged dermal exposure to white spirit, e.g., resulting from wearing clothes that have been soaked or moistened
by white spirit for hours, may produce irritation and dermatitis.
Single cases of acute toxicity to the kidney, liver and bone marrow have been reported following exposure to white
spirit at high levels. However, owing to lack of details and the sporadic nature of the reportings, the relevance of these
findings is unclear.
Inhalation of aliphatic hydrocarbon vapours seems to show little toxicity.
Section 12 - Ecological Information
Insufficient data to be sure of status.
Biodegradation is expected to be the primary fate process for aliphatic hydrocarbons in soil and water. The rate and
extent of biodegradation are dependent on the ambient temperature, the presence of a sufficient number of
microorganisms capable of metabolizing the hydrocarbons and the concentration of white spirit in or on the soil or
water.
Biodegradation of C7 to C12 hydrocarbons is expected to be significant under environmental conditions favourable to
microbial oxidation. Naturally occurring hydrocarbon-degrading microorganisms have been isolated from polluted soil
and, to a lesser extent, non-polluted soil.
The low water solubility and moderate vapour pressure of white spirit (Stoddard solvent) suggest that volatilization
and subsequent photo-oxidation are important processes for abiotic degradation in the atmosphere.
The octanol/water partition coefficient (log Pow) of white spirit (17% v/v aromatics) has been found to be 3.5 to 6.4.
This indicates a moderate potential for bioaccumulation by organisms from water and a likelihood of partitioning to fat
within organisms.
Section 13 - Disposal Considerations
Disposal: There are many pieces of legislation covering waste disposal and they differ in each state and territory, so
each user must refer to laws operating in their area. In some areas, certain wastes must be tracked. The Hierarchy of
Controls seems to be common - the user should investigate: Reduce, Reuse, and Recycle and only if all else fails
should disposal be considered. Note that properties of a product may change in use, so that the following suggestions
may not always be appropriate. The following may help you in properly addressing this matter for this product. This
product may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its intended use.
If it has been contaminated, it may be possible to reclaim the product by filtration, distillation or some other means. If
neither of these options is suitable, consider controlled incineration, or landfill.
Section 14 - Transport Information
ADG Code: This product is not classified as a Dangerous Good. No special transport conditions are necessary
unless required by other regulations.
Section 15 - Regulatory Information
AICS: All of the significant ingredients in this formulation are compliant with NICNAS regulations.
The following ingredient: Mineral oil, is mentioned in the SUSDP.
Section 16 - Other Information
This MSDS contains only safety-related information. For other data see product literature.
Acronyms:
ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail
MATERIAL SAFETY DATA SHEET
Issued by: Farmoz Pty Ltd Phone: (02)9431 7800
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Product Name: Farmoz Amplify Spray Tank Adjuvant
Page: 5 of 5
This revision issued: December, 2006
AICS Australian Inventory of Chemical Substances
ASCC Office of the Australian Safety and Compensation Council
CAS number Chemical Abstracts Service Registry Number
Hazchem Code Emergency action code of numbers and letters that provide information to
emergency services especially firefighters
IARC International Agency for Research on Cancer
NOS Not otherwise specified
NTP National Toxicology Program (USA)
R-Phrase Risk Phrase
SUSDP Standard for the Uniform Scheduling of Drugs & Poisons
UN Number United Nations Number
Contact Points:
Call Farmoz on (02)9431 7800 and ask for the technical manager. Fax: (02)9431 7700
Police and Fire Brigade: Dial 000
Emergency contact: 1800 024 973 (24 hours)
If ineffective: Dial Poisons Information Centre
(13 1126 from anywhere in Australia)
The information contained in this Material Safety Data Sheet is provided in good faith and is believed to be correct at the date
hereof. However, it is expected that individuals receiving the information will exercise their independent judgement in determining
its appropriateness for a particular purpose. Farmoz Pty Ltd makes no representation as to the accuracy or comprehensiveness of
the information and to the full extent allowed by law excludes all liability whatsoever, whether with respect to negligence or
otherwise, for any loss or damage arising from or connection with the supply or use of the information in this Material Safety Data
Sheet.
Please read all labels carefully before using product.
This MSDS is prepared in accord with the ASCC document 鈥淣ational Code of Practice for the Preparation
of Material Safety Data Sheets鈥? 2nd Edition [NOHSC:2011(2003)]
Copyright 漏 Kilford & Kilford Pty Ltd, December, 2006.
http://www.kilford.com.au/ Phone (02)9251 4532
MATERIAL SAFETY DATA SHEET
Issued by: Farmoz Pty Ltd Phone: (02)9431 7800
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
|