**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |2,3-Dimethylthiophene | 97% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN F
Risk Phrases: 11 20/21/22
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation, in contact with skin and if
swallowed.The toxicological properties of this material have not been
fully investigated.Highly flammable.
Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully
investigated. Ingestion of large amounts may cause CNS depression.
Inhalation:
Harmful if inhaled. May cause respiratory tract irritation. The
toxicological properties of this substance have not been fully
investigated. Vapors may cause dizziness or suffocation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Flammable liquid and vapor. Will be easily
ignited by heat, sparks or flame. Containers may explode if exposed
to fire.
Extinguishing Media:
Water may be ineffective. Water may spread fire. Do NOT use straight
streams of water. Cool containers with flooding quantities of water
until well after fire is out. Use dry chemical or foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid breathing
dust, vapor, mist, or gas. Avoid contact with eyes, skin, and
clothing. Avoid contact with skin and eyes. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 0-01-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Clear liquid
Color: colorless to light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 1 deg C (> 33.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H8S
Molecular Weight: 112.116
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Not currently available.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 0-01-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,3-Dimethylthiophene -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 11 Highly flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 0-01-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-01-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-01-1 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 1/17/2000 Revision #4 Date: 5/06/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
(1-Amino-2,2-dimethylpropyl)phosphonic acid, 97%
| 125078-15-1 |
|
Yttrium(iii)-oxide, 99.99%
| 1314-36-9 |
|
Tetracycline Hydrochloride,"Can be Used as Secondary Standard"
| 64-75-5 |
|
Erythromycin
| 114-07-8 |
|
Glyoxal, 40 wt. % solution in water
| 107-22-2 |
|
4-Chloro-1-Naphthol, 99% (Titr.)
| 604-44-4 |
|
Dextran (Low Fraction)
| 9004-54-0 |
|
(1-Amino-1-methylethyl)phosphonic acid, 97%
| 5035-79-0 |
|
Murexide
| 3051-09-0 |
|
(1-Amino-1-methylpropyl)phosphonic acid, 97%
| 62879-51-0 |
|
DL-Aspartic Acid, 99+%
| 617-45-8 |
|
o-Xylene
| 95-47-6 |
|
p-Toluenesulfonic Acid Monohydrate
| 104-15-4 |
|
Copper (II) Bromide, Anhydrous, 99+%
| 7789-45-9 |
|
Pancreatin (Powder)
| 8049-47-6 |
|
(1-Amino-1-methylbutyl)phosphonic acid, 97%
| 125078-17-3 |
|
(1-Amino-1,2-dimethylpropyl)phosphonic acid, 97%
| 101804-01-7 |
|
Tin (II) Chloride Dihydrate, P.A.
| 10025-69-1 |
|
(1-Amino-1,3-dimethylbutyl)phosphonic acid, 97%
| 125078-18-4 |
|
Poly(vinyl alcohol), 88% Hydrolyzed Average M.W. 88.000
| 9002-89-5 |
|
(1-Amino-1-cyclopentyl)phosphonic acid, 97%
| 67550-64-5 |
|
Zinc acetate dihydrate, 98+%
| 5970-45-6 |
|
Ammonia, solution in methanol, ca. 7N
| 67-56-1 |
|
2-Amino-5-Chloropyridine, 98%
| 1072-98-6 |
|
Kinetin, 99%
| 525-79-1 |
|
FMOC-L-Leucine, 98%
| 35661-60-0 |
|
(1-Amino-1-cyclohexyl)phosphonic acid, 97%
| 67398-11-2 |
|
Cottonseed Oil, U.S.P.N.F.
| 8001-29-4 |
|
FMOC-L-Valine, 98%
| 68858-20-8 |
|
FMOC-L-Asparagine, 98%
| 71989-16-7 |
|
Brucine sulfate heptahydrate, reagent ACS
| 4845-99-2 |
|
(1-Aminopropyl)phosphonic acid, 97%
| 14047-23-5 |
|
Sodium phosphate monobasic, dihydrate, p.a.
| 7558-80-7 |
|
Kaolin, Monohydrate
| 1332-58-7 |
|
FMOC-L-Glutamic Acid-O-T-Butylester, Monohydrate, 98%
| 71989-18-9 |
|
Litmus, indicator grade
| 1393-92-6 |
|
Tween 20
| 9005-64-5 |
|
Sodium Hypochlorite, 13% Active Chlorine
| 7681-52-9 |
|
FMOC-O-T-Butyl-L-Threonine, 98%
| 71989-35-0 |
|
Boc-L-Asparagine, 99+%
| 7536-55-2 |
|
Manganese (II) chloride, 98%
| 7773-01-5 |
|
N,N'-Methylenebisacrylamide, for electrophoresis, 99+%
| 110-26-9 |
|
Cyanocobalamin, 96%
| 68-19-9 |
|
Sodium phosphate dibasic dihydrate, HPLC grade, 99+%
| 7558-79-4 |
|
2,5-Disulfoaniline, 95%
| 98-44-2 |
|
2,3,4,5,6-Pentabromotoluene, 99%
| 87-83-2 |
|
2,4-Dibromo-6-nitroaniline, 98%
| 827-23-6 |
|
2,3-Dimethylthiophene, 97%
| 0-01-1 |
|
Tin, Mossy, 99.8%
| 7440-31-5 |
|
FMOC-O-T-Butyl-L-Serine, 98%
| 71989-33-8 |
|
|