Search   
MSDS 
:
 Kinetin, 99%
CAS 
:
 525-79-1
SYNONYMS 
:
 N-Furfuryladenine; FAP; N(sup6)-Furfuryladenine; 6-Furfuryladenine;     N(sup6)-(Furfurylamino)purine; 6-(Furfurylamino)purine;
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 525-79-1 |Kinetin | ca. 99 | 208-382-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with skin
and eyes. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Deep freeze (below -20C).

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 525-79-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 269.00 - 271.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 271 deg C
Solubility in water: soluble in cold water
Specific Gravity/Density: Not available.
Molecular Formula: C10H9N5O
Molecular Weight: 215.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable. However, may decompose if heated.
Conditions to Avoid:
High temperatures, incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 525-79-1: AU6270000
LD50/LC50:
Not available.
Carcinogenicity:
Kinetin -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 525-79-1: 1
Canada
CAS# 525-79-1 is listed on Canada's DSL List.
CAS# 525-79-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 525-79-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/07/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(1-Amino-2,2-dimethylpropyl)phosphonic acid, 97% 125078-15-1
Yttrium(iii)-oxide, 99.99% 1314-36-9
Tetracycline Hydrochloride,"Can be Used as Secondary Standard" 64-75-5
Erythromycin 114-07-8
Glyoxal, 40 wt. % solution in water 107-22-2
4-Chloro-1-Naphthol, 99% (Titr.) 604-44-4
Dextran (Low Fraction) 9004-54-0
(1-Amino-1-methylethyl)phosphonic acid, 97% 5035-79-0
Murexide 3051-09-0
(1-Amino-1-methylpropyl)phosphonic acid, 97% 62879-51-0
DL-Aspartic Acid, 99+% 617-45-8
o-Xylene 95-47-6
p-Toluenesulfonic Acid Monohydrate 104-15-4
Copper (II) Bromide, Anhydrous, 99+% 7789-45-9
Pancreatin (Powder) 8049-47-6
(1-Amino-1-methylbutyl)phosphonic acid, 97% 125078-17-3
(1-Amino-1,2-dimethylpropyl)phosphonic acid, 97% 101804-01-7
Tin (II) Chloride Dihydrate, P.A. 10025-69-1
(1-Amino-1,3-dimethylbutyl)phosphonic acid, 97% 125078-18-4
Poly(vinyl alcohol), 88% Hydrolyzed Average M.W. 88.000 9002-89-5
(1-Amino-1-cyclopentyl)phosphonic acid, 97% 67550-64-5
Zinc acetate dihydrate, 98+% 5970-45-6
Ammonia, solution in methanol, ca. 7N 67-56-1
2-Amino-5-Chloropyridine, 98% 1072-98-6
Kinetin, 99% 525-79-1
FMOC-L-Leucine, 98% 35661-60-0
(1-Amino-1-cyclohexyl)phosphonic acid, 97% 67398-11-2
Cottonseed Oil, U.S.P.N.F. 8001-29-4
FMOC-L-Valine, 98% 68858-20-8
FMOC-L-Asparagine, 98% 71989-16-7
Brucine sulfate heptahydrate, reagent ACS 4845-99-2
(1-Aminopropyl)phosphonic acid, 97% 14047-23-5
Sodium phosphate monobasic, dihydrate, p.a. 7558-80-7
Kaolin, Monohydrate 1332-58-7
FMOC-L-Glutamic Acid-O-T-Butylester, Monohydrate, 98% 71989-18-9
Litmus, indicator grade 1393-92-6
Tween 20 9005-64-5
Sodium Hypochlorite, 13% Active Chlorine 7681-52-9
FMOC-O-T-Butyl-L-Threonine, 98% 71989-35-0
Boc-L-Asparagine, 99+% 7536-55-2
Manganese (II) chloride, 98% 7773-01-5
N,N'-Methylenebisacrylamide, for electrophoresis, 99+% 110-26-9
Cyanocobalamin, 96% 68-19-9
Sodium phosphate dibasic dihydrate, HPLC grade, 99+% 7558-79-4
2,5-Disulfoaniline, 95% 98-44-2
2,3,4,5,6-Pentabromotoluene, 99% 87-83-2
2,4-Dibromo-6-nitroaniline, 98% 827-23-6
2,3-Dimethylthiophene, 97% 0-01-1
Tin, Mossy, 99.8% 7440-31-5
FMOC-O-T-Butyl-L-Serine, 98% 71989-33-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net