Search   
MSDS 
:
 Erythromycin
CAS 
:
 114-07-8
SYNONYMS 
:
 E-Mycin; Erythrocin.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 114-07-8 |Erythromycin | >98 | 204-040-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. May be harmful if
absorbed through the skin.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause allergic respiratory reaction. May cause respiratory tract
irritation. May be harmful if inhaled.
Chronic:
This substance has caused adverse reproductive and fetal effects in
laboratory animals.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting
unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with skin and eyes. Keep
container tightly closed. Avoid ingestion and inhalation.
Storage:
Keep containers tightly closed. Store in a cool, dry area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 114-07-8:

Russia: 0.4 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to yellow
Odor: none reported
pH: 8-10.5 (4% sol)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 275 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Low water solubility.
Specific Gravity/Density: Not available.
Molecular Formula: C37H67NO13
Molecular Weight: 733.4679

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 114-07-8: KF4375000
LD50/LC50:
CAS# 114-07-8: Oral, mouse: LD50 = 2580 mg/kg; Oral, rat: LD50 =
4600 mg/kg.
Carcinogenicity:
Erythromycin -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 114-07-8: No information available.
Canada
CAS# 114-07-8 is listed on Canada's DSL List.
CAS# 114-07-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 114-07-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 12/16/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(1-Amino-2,2-dimethylpropyl)phosphonic acid, 97% 125078-15-1
Yttrium(iii)-oxide, 99.99% 1314-36-9
Tetracycline Hydrochloride,"Can be Used as Secondary Standard" 64-75-5
Erythromycin 114-07-8
Glyoxal, 40 wt. % solution in water 107-22-2
4-Chloro-1-Naphthol, 99% (Titr.) 604-44-4
Dextran (Low Fraction) 9004-54-0
(1-Amino-1-methylethyl)phosphonic acid, 97% 5035-79-0
Murexide 3051-09-0
(1-Amino-1-methylpropyl)phosphonic acid, 97% 62879-51-0
DL-Aspartic Acid, 99+% 617-45-8
o-Xylene 95-47-6
p-Toluenesulfonic Acid Monohydrate 104-15-4
Copper (II) Bromide, Anhydrous, 99+% 7789-45-9
Pancreatin (Powder) 8049-47-6
(1-Amino-1-methylbutyl)phosphonic acid, 97% 125078-17-3
(1-Amino-1,2-dimethylpropyl)phosphonic acid, 97% 101804-01-7
Tin (II) Chloride Dihydrate, P.A. 10025-69-1
(1-Amino-1,3-dimethylbutyl)phosphonic acid, 97% 125078-18-4
Poly(vinyl alcohol), 88% Hydrolyzed Average M.W. 88.000 9002-89-5
(1-Amino-1-cyclopentyl)phosphonic acid, 97% 67550-64-5
Zinc acetate dihydrate, 98+% 5970-45-6
Ammonia, solution in methanol, ca. 7N 67-56-1
2-Amino-5-Chloropyridine, 98% 1072-98-6
Kinetin, 99% 525-79-1
FMOC-L-Leucine, 98% 35661-60-0
(1-Amino-1-cyclohexyl)phosphonic acid, 97% 67398-11-2
Cottonseed Oil, U.S.P.N.F. 8001-29-4
FMOC-L-Valine, 98% 68858-20-8
FMOC-L-Asparagine, 98% 71989-16-7
Brucine sulfate heptahydrate, reagent ACS 4845-99-2
(1-Aminopropyl)phosphonic acid, 97% 14047-23-5
Sodium phosphate monobasic, dihydrate, p.a. 7558-80-7
Kaolin, Monohydrate 1332-58-7
FMOC-L-Glutamic Acid-O-T-Butylester, Monohydrate, 98% 71989-18-9
Litmus, indicator grade 1393-92-6
Tween 20 9005-64-5
Sodium Hypochlorite, 13% Active Chlorine 7681-52-9
FMOC-O-T-Butyl-L-Threonine, 98% 71989-35-0
Boc-L-Asparagine, 99+% 7536-55-2
Manganese (II) chloride, 98% 7773-01-5
N,N'-Methylenebisacrylamide, for electrophoresis, 99+% 110-26-9
Cyanocobalamin, 96% 68-19-9
Sodium phosphate dibasic dihydrate, HPLC grade, 99+% 7558-79-4
2,5-Disulfoaniline, 95% 98-44-2
2,3,4,5,6-Pentabromotoluene, 99% 87-83-2
2,4-Dibromo-6-nitroaniline, 98% 827-23-6
2,3-Dimethylthiophene, 97% 0-01-1
Tin, Mossy, 99.8% 7440-31-5
FMOC-O-T-Butyl-L-Serine, 98% 71989-33-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net