Search   
MSDS 
:
 p-Toluenesulfonic Acid Monohydrate
CAS 
:
 104-15-4
SYNONYMS 
:
 Benzenesulfonic acid, 4-methyl-, monohydrate; Toluene, 4-sulfonic     acid, monohydrate; PTSA monohydrate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 6192-52-5 |p-Toluenesulfonic acid monohydrate | > 97.5 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes severe eye irritation and possible burns.
Skin:
Causes skin irritation. Not expected to cause an allergic skin
reaction.
Ingestion:
May be harmful if swallowed.
Inhalation:
Dust is irritating to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion. Contact with metals may evolve
flammable hydrogen gas.
Extinguishing Media:
Use water spray, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Keep container tightly closed. Avoid
breathing dust. Do not get in eyes. Avoid contact with skin and
clothing.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 104-15-4:

CAS# 6192-52-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: none reported
pH: Not applicable.
Vapor Pressure: 0.0000027 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 140 deg C @ 20 mmHg
Freezing/Melting Point: 103 deg C
Autoignition Temperature: 350 deg C ( 662.00 deg F)
Flash Point: 180 deg C ( 356.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: Not available.
Molecular Formula: C7H8O3S.H2O
Molecular Weight: 190.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, moisture, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, metals.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 104-15-4: XT6300000
CAS# 6192-52-5: DB7164000
LD50/LC50:
CAS# 104-15-4: Oral, rat: LD50 = 2480 mg/kg.
CAS# 6192-52-5: Oral, mouse: LD50 = 1683 mg/kg; Oral, rat: LD50 =
2570 mg/kg.
Skin absorption LD50 guinea pig: no evidence at 1.0 g/kg.
irritation, guinea pig: Moderate.
pig: Moderate exacerbation.
sensitize any animals tested.
Company)
Carcinogenicity:
p-Toluenesulfonic acid anhydrous -
Not listed by ACGIH, IARC, or NTP.
p-Toluenesulfonic acid monohydrate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: > 100 mg/l; 96 hr; LC50

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ARYLSULPHONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing Group: III
IMO
Shipping Name: ARYLSULPHONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing Group: III
RID/ADR
Shipping Name: ARYLSULPHONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37 Wear suitable gloves.
WGK (Water Danger/Protection)
CAS# 104-15-4: 1
CAS# 6192-52-5: 1
Canada
CAS# 104-15-4 is listed on Canada's DSL List.
CAS# 104-15-4 is not listed on Canada's Ingredient Disclosure List.
CAS# 6192-52-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 104-15-4 is listed on the TSCA inventory.
CAS# 6192-52-5 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 6/24/1999 Revision #5 Date: 5/20/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(1-Amino-2,2-dimethylpropyl)phosphonic acid, 97% 125078-15-1
Yttrium(iii)-oxide, 99.99% 1314-36-9
Tetracycline Hydrochloride,"Can be Used as Secondary Standard" 64-75-5
Erythromycin 114-07-8
Glyoxal, 40 wt. % solution in water 107-22-2
4-Chloro-1-Naphthol, 99% (Titr.) 604-44-4
Dextran (Low Fraction) 9004-54-0
(1-Amino-1-methylethyl)phosphonic acid, 97% 5035-79-0
Murexide 3051-09-0
(1-Amino-1-methylpropyl)phosphonic acid, 97% 62879-51-0
DL-Aspartic Acid, 99+% 617-45-8
o-Xylene 95-47-6
p-Toluenesulfonic Acid Monohydrate 104-15-4
Copper (II) Bromide, Anhydrous, 99+% 7789-45-9
Pancreatin (Powder) 8049-47-6
(1-Amino-1-methylbutyl)phosphonic acid, 97% 125078-17-3
(1-Amino-1,2-dimethylpropyl)phosphonic acid, 97% 101804-01-7
Tin (II) Chloride Dihydrate, P.A. 10025-69-1
(1-Amino-1,3-dimethylbutyl)phosphonic acid, 97% 125078-18-4
Poly(vinyl alcohol), 88% Hydrolyzed Average M.W. 88.000 9002-89-5
(1-Amino-1-cyclopentyl)phosphonic acid, 97% 67550-64-5
Zinc acetate dihydrate, 98+% 5970-45-6
Ammonia, solution in methanol, ca. 7N 67-56-1
2-Amino-5-Chloropyridine, 98% 1072-98-6
Kinetin, 99% 525-79-1
FMOC-L-Leucine, 98% 35661-60-0
(1-Amino-1-cyclohexyl)phosphonic acid, 97% 67398-11-2
Cottonseed Oil, U.S.P.N.F. 8001-29-4
FMOC-L-Valine, 98% 68858-20-8
FMOC-L-Asparagine, 98% 71989-16-7
Brucine sulfate heptahydrate, reagent ACS 4845-99-2
(1-Aminopropyl)phosphonic acid, 97% 14047-23-5
Sodium phosphate monobasic, dihydrate, p.a. 7558-80-7
Kaolin, Monohydrate 1332-58-7
FMOC-L-Glutamic Acid-O-T-Butylester, Monohydrate, 98% 71989-18-9
Litmus, indicator grade 1393-92-6
Tween 20 9005-64-5
Sodium Hypochlorite, 13% Active Chlorine 7681-52-9
FMOC-O-T-Butyl-L-Threonine, 98% 71989-35-0
Boc-L-Asparagine, 99+% 7536-55-2
Manganese (II) chloride, 98% 7773-01-5
N,N'-Methylenebisacrylamide, for electrophoresis, 99+% 110-26-9
Cyanocobalamin, 96% 68-19-9
Sodium phosphate dibasic dihydrate, HPLC grade, 99+% 7558-79-4
2,5-Disulfoaniline, 95% 98-44-2
2,3,4,5,6-Pentabromotoluene, 99% 87-83-2
2,4-Dibromo-6-nitroaniline, 98% 827-23-6
2,3-Dimethylthiophene, 97% 0-01-1
Tin, Mossy, 99.8% 7440-31-5
FMOC-O-T-Butyl-L-Serine, 98% 71989-33-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net