Search   
MSDS 
:
 Cottonseed Oil, U.S.P.N.F.
CAS 
:
 8001-29-4
SYNONYMS 
:
 Cotton Oil.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 8001-29-4 |Cottonseed oil | 100 | 232-280-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Light sensitive.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water fog, dry chemical, carbon dioxide,
or regular foam. Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Avoid ingestion and inhalation. Store
protected from light.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low. Use
adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 8001-29-4:


Personal Protective Equipment

Eyes:
Wear safety glasses and chemical goggles if splashing
is possible. Wear appropriate protective eyeglasses or
chemical safety goggles as described by OSHA's eye and
face protection regulations in 29 CFR 1910.133 or
European Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure. Wear appropriate protective
gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin. Wear appropriate protective
clothing to prevent skin exposure.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions. Follow the OSHA respirator regulations
found in 29 CFR 1910.134 or European Standard EN 149.
Use a NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Immiscible.
Specific Gravity/Density: .9180g/cm3
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 8001-29-4: GN2815000
LD50/LC50:
CAS# 8001-29-4: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Cottonseed oil -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 8001-29-4: 0
Canada
CAS# 8001-29-4 is listed on Canada's DSL List.
CAS# 8001-29-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 8001-29-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/22/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(1-Amino-2,2-dimethylpropyl)phosphonic acid, 97% 125078-15-1
Yttrium(iii)-oxide, 99.99% 1314-36-9
Tetracycline Hydrochloride,"Can be Used as Secondary Standard" 64-75-5
Erythromycin 114-07-8
Glyoxal, 40 wt. % solution in water 107-22-2
4-Chloro-1-Naphthol, 99% (Titr.) 604-44-4
Dextran (Low Fraction) 9004-54-0
(1-Amino-1-methylethyl)phosphonic acid, 97% 5035-79-0
Murexide 3051-09-0
(1-Amino-1-methylpropyl)phosphonic acid, 97% 62879-51-0
DL-Aspartic Acid, 99+% 617-45-8
o-Xylene 95-47-6
p-Toluenesulfonic Acid Monohydrate 104-15-4
Copper (II) Bromide, Anhydrous, 99+% 7789-45-9
Pancreatin (Powder) 8049-47-6
(1-Amino-1-methylbutyl)phosphonic acid, 97% 125078-17-3
(1-Amino-1,2-dimethylpropyl)phosphonic acid, 97% 101804-01-7
Tin (II) Chloride Dihydrate, P.A. 10025-69-1
(1-Amino-1,3-dimethylbutyl)phosphonic acid, 97% 125078-18-4
Poly(vinyl alcohol), 88% Hydrolyzed Average M.W. 88.000 9002-89-5
(1-Amino-1-cyclopentyl)phosphonic acid, 97% 67550-64-5
Zinc acetate dihydrate, 98+% 5970-45-6
Ammonia, solution in methanol, ca. 7N 67-56-1
2-Amino-5-Chloropyridine, 98% 1072-98-6
Kinetin, 99% 525-79-1
FMOC-L-Leucine, 98% 35661-60-0
(1-Amino-1-cyclohexyl)phosphonic acid, 97% 67398-11-2
Cottonseed Oil, U.S.P.N.F. 8001-29-4
FMOC-L-Valine, 98% 68858-20-8
FMOC-L-Asparagine, 98% 71989-16-7
Brucine sulfate heptahydrate, reagent ACS 4845-99-2
(1-Aminopropyl)phosphonic acid, 97% 14047-23-5
Sodium phosphate monobasic, dihydrate, p.a. 7558-80-7
Kaolin, Monohydrate 1332-58-7
FMOC-L-Glutamic Acid-O-T-Butylester, Monohydrate, 98% 71989-18-9
Litmus, indicator grade 1393-92-6
Tween 20 9005-64-5
Sodium Hypochlorite, 13% Active Chlorine 7681-52-9
FMOC-O-T-Butyl-L-Threonine, 98% 71989-35-0
Boc-L-Asparagine, 99+% 7536-55-2
Manganese (II) chloride, 98% 7773-01-5
N,N'-Methylenebisacrylamide, for electrophoresis, 99+% 110-26-9
Cyanocobalamin, 96% 68-19-9
Sodium phosphate dibasic dihydrate, HPLC grade, 99+% 7558-79-4
2,5-Disulfoaniline, 95% 98-44-2
2,3,4,5,6-Pentabromotoluene, 99% 87-83-2
2,4-Dibromo-6-nitroaniline, 98% 827-23-6
2,3-Dimethylthiophene, 97% 0-01-1
Tin, Mossy, 99.8% 7440-31-5
FMOC-O-T-Butyl-L-Serine, 98% 71989-33-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net