Search   
MSDS 
:
 Benzyl bromide, 98%
CAS 
:
 100-39-0
SYNONYMS 
:
 alpha-Bromotoluene; alpha-Bromophenylmethane
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 100-39-0 |Benzyl bromide | 100.0 | 202-847-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Light
sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye irritation. May cause eye burns. Lachrymator
(substance which increases the flow of tears). Causes redness and
pain.
Skin:
Causes skin irritation. Causes redness and pain.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns. The toxicological properties of this
substance have not been fully investigated. May cause central
nervous system depression.
Inhalation:
May cause respiratory tract irritation. Exposure produces central
nervous system depression. Inhalation may be fatal as a result of
spasm, inflammation, edema of the larynx and bronchi, chemical
pneumonitis and pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire. Combustible
liquid.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Take
precautionary measures against static discharges. Do not ingest or
inhale. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place. Do
not store in direct sunlight. Store in a tightly closed container.
Dark room. Do not store in metal containers.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 100-39-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear light amber
Odor: Pleasant odor.
pH: Not available.
Vapor Pressure: 0.49 mbar @ 20 deg
Viscosity: Not available.
Boiling Point: 198 - 199 deg C @ 760.00mm Hg
Freezing/Melting Point: (-3) - ( -1) deg C
Autoignition Temperature: Not available.
Flash Point: 86 deg C ( 186.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 436 MG/L (25C)
Specific Gravity/Density: 1.4380g/cm3
Molecular Formula: C7H7Br
Molecular Weight: 171.04

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, exposure to moist air or water.
Incompatibilities with Other Materials:
Bases, amines, oxidizing agents, alcohols, steel.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 100-39-0: XS7965000
LD50/LC50:
Not available.
Carcinogenicity:
Benzyl bromide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
See Dictionary of Substances and their Effects + Genium for more
information.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: BENZYL BROMIDE
Hazard Class: 6.1 (8)
UN Number: 1737
Packing Group: II
IMO
Shipping Name: BENZYL BROMIDE
Hazard Class: 6.1 (8)
UN Number: 1737
Packing Group: II
RID/ADR
Shipping Name: BENZYL BROMIDE
Hazard Class: 6.1
UN Number: 1737
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 39 Wear eye/face protection.
WGK (Water Danger/Protection)
CAS# 100-39-0: 2
Canada
CAS# 100-39-0 is listed on Canada's DSL List.
CAS# 100-39-0 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 100-39-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3,4-Diacetoxy-1-Butene, 97% (GC) 18085-02-4
3-Cyano-4,6-Dimethyl-2-Hydroxypyridine, 97% 769-28-8
Tetramethylammonium Bromide 64-20-0
Sulfanilyl Fluoride 98-62-4
4-Chloro-2-Nitroaniline, 99% 89-63-4
Ethyl Picolinate, 99% 2524-52-9
Allyl heptanoate, 98+% 142-19-8
4-Hydroxypyrazolo(3,4-d)pyrimidine, 98% 315-30-0
2-Ethoxy-3-Buten-1-ol 34684-08-7
4-Phenyl-2-Butyl Acetate, 98+% 10415-88-0
2-Bromo-4-fluorotoluene, 97+% 1422-53-3
Glycidyl phenyl ether, 99% 122-60-1
Benzyl bromide, 98% 100-39-0
P-tert.-butyl-1,3-dihydroxy-2,4-dimercaptocalix(4)arene
2',4'-Difluoropropiophenone, 98% 85068-30-0
4,4'Bicyclo??2.2.2??hept-2-Ylidenebisphenol 1943-96-0
1-Methoxy-4-Nitronaphthalene 4900-63-4
3,4-Dimethylphenol, 99% 95-65-8
Dipropylsulfide, 98+% 111-47-7
4-Methylpiperidine, 99% 626-58-4
4-Methyl-5-thiazoleethanol, 98% 137-00-8
2-Acetamidofluorene, 95+% 53-96-3
2-Chloro-6-Fluorophenylacetic Acid, 98% 37777-76-7
(2r,3s)-1-carboxy-4-pentyl-2,3-dihydroxy- cyclohexa-4,6-diene
(R)-(-)-2-Amino-2-methylbutanedioic acid, 99+% (80% e.e.) 14603-76-0
Iodine Solution According to WIJS, 0.1 Mol ICl/l 64-19-7
2-Ethylbutyryl Chloride, 99% (Titr.) 2736-40-5
(1S,2S)-(-)-N,N'-Dimethyl-1,2-Diphenyl-1,2 -Ethane Diamine, 99% 70749-06-3
alpha, alpha-Diphenyl-gamma-butyrolactone, tech. 959-33-1
1-Naphthol-3,6-disulfonic acid, disodium salt, tech. 20349-39-7
Dibenzyl phosphite, tech. 17176-77-1
1,3-Dichloro-5,5-Dimethylhydantoin Min. Available Chlorine 68% 118-52-5
1-Phenyl-1-cyclopropanecarbonitrile, 97% 935-44-4
Ethyl Cyanoacetate, 98+% 105-56-6
Propylene sulfide, 98% 1072-43-1
N,N-Dimethyl-1,4-phenylenediamine sulfate, (2:1) 99% (titr.) 60160-75-0
2-Hydroxypyridine, 97% 142-08-5
5,6,7,8-Tetrahydro-1-naphthol, 99% 529-35-1
2-(Tetrahydrofurfuryloxy)-Tetrahydropyran 98% 710-14-5
1-Bromohexane, 99+% 111-25-1
5-Chloro-2-Methylaniline, 98% 95-79-4
1,2-Difluoro-4-iodobenzene, 99% 64248-58-4
3-Methyl-1-phenyl-1H-pyrazole 1128-54-7
1-Dodecyne, 98% 765-03-7
Fast Red TR Salt 3165-93-3
4-Methylsulphonylbenzoic Acid, 95+% 4052-30-6
Methyl Alpha-Chloroacrylate, 99% (GC) 80-63-7
Lumichrome 1086-80-2
Bisphenol A Diacetate, 99 +% 10192-62-8
3,4,5-Trimethoxyphenylacetic Acid, 99% 951-82-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net