**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 98-62-4 |Benzenesulfonyl Fluoride, 4-Amino- | ca 100 | 202-687-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.The toxicological properties of this material
have not been fully investigated.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. The toxicological properties of this
substance have not been fully investigated.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid runoff into storm sewers and ditches which lead to
waterways. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Do not allow contact with water. Discard
contaminated shoes. Keep from contact with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Do not store in metal containers. Store protected from
moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 98-62-4:
United States OSHA: 2.5 mg/m3 TWA (as F) (listed under Fluorides
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white or yellow-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 65.00 - 67.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H6FNO2S
Molecular Weight: 175.18
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat.
Incompatibilities with Other Materials:
Moisture, strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide, fluoride fumes.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 98-62-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzenesulfonyl Fluoride, 4-Amino- -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 98-62-4: No information available.
Canada
CAS# 98-62-4 is listed on Canada's NDSL List.
CAS# 98-62-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 98-62-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/24/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3,4-Diacetoxy-1-Butene, 97% (GC)
| 18085-02-4 |
|
3-Cyano-4,6-Dimethyl-2-Hydroxypyridine, 97%
| 769-28-8 |
|
Tetramethylammonium Bromide
| 64-20-0 |
|
Sulfanilyl Fluoride
| 98-62-4 |
|
4-Chloro-2-Nitroaniline, 99%
| 89-63-4 |
|
Ethyl Picolinate, 99%
| 2524-52-9 |
|
Allyl heptanoate, 98+%
| 142-19-8 |
|
4-Hydroxypyrazolo(3,4-d)pyrimidine, 98%
| 315-30-0 |
|
2-Ethoxy-3-Buten-1-ol
| 34684-08-7 |
|
4-Phenyl-2-Butyl Acetate, 98+%
| 10415-88-0 |
|
2-Bromo-4-fluorotoluene, 97+%
| 1422-53-3 |
|
Glycidyl phenyl ether, 99%
| 122-60-1 |
|
Benzyl bromide, 98%
| 100-39-0 |
|
P-tert.-butyl-1,3-dihydroxy-2,4-dimercaptocalix(4)arene
| |
|
2',4'-Difluoropropiophenone, 98%
| 85068-30-0 |
|
4,4'Bicyclo??2.2.2??hept-2-Ylidenebisphenol
| 1943-96-0 |
|
1-Methoxy-4-Nitronaphthalene
| 4900-63-4 |
|
3,4-Dimethylphenol, 99%
| 95-65-8 |
|
Dipropylsulfide, 98+%
| 111-47-7 |
|
4-Methylpiperidine, 99%
| 626-58-4 |
|
4-Methyl-5-thiazoleethanol, 98%
| 137-00-8 |
|
2-Acetamidofluorene, 95+%
| 53-96-3 |
|
2-Chloro-6-Fluorophenylacetic Acid, 98%
| 37777-76-7 |
|
(2r,3s)-1-carboxy-4-pentyl-2,3-dihydroxy- cyclohexa-4,6-diene
| |
|
(R)-(-)-2-Amino-2-methylbutanedioic acid, 99+% (80% e.e.)
| 14603-76-0 |
|
Iodine Solution According to WIJS, 0.1 Mol ICl/l
| 64-19-7 |
|
2-Ethylbutyryl Chloride, 99% (Titr.)
| 2736-40-5 |
|
(1S,2S)-(-)-N,N'-Dimethyl-1,2-Diphenyl-1,2 -Ethane Diamine, 99%
| 70749-06-3 |
|
alpha, alpha-Diphenyl-gamma-butyrolactone, tech.
| 959-33-1 |
|
1-Naphthol-3,6-disulfonic acid, disodium salt, tech.
| 20349-39-7 |
|
Dibenzyl phosphite, tech.
| 17176-77-1 |
|
1,3-Dichloro-5,5-Dimethylhydantoin Min. Available Chlorine 68%
| 118-52-5 |
|
1-Phenyl-1-cyclopropanecarbonitrile, 97%
| 935-44-4 |
|
Ethyl Cyanoacetate, 98+%
| 105-56-6 |
|
Propylene sulfide, 98%
| 1072-43-1 |
|
N,N-Dimethyl-1,4-phenylenediamine sulfate, (2:1) 99% (titr.)
| 60160-75-0 |
|
2-Hydroxypyridine, 97%
| 142-08-5 |
|
5,6,7,8-Tetrahydro-1-naphthol, 99%
| 529-35-1 |
|
2-(Tetrahydrofurfuryloxy)-Tetrahydropyran 98%
| 710-14-5 |
|
1-Bromohexane, 99+%
| 111-25-1 |
|
5-Chloro-2-Methylaniline, 98%
| 95-79-4 |
|
1,2-Difluoro-4-iodobenzene, 99%
| 64248-58-4 |
|
3-Methyl-1-phenyl-1H-pyrazole
| 1128-54-7 |
|
1-Dodecyne, 98%
| 765-03-7 |
|
Fast Red TR Salt
| 3165-93-3 |
|
4-Methylsulphonylbenzoic Acid, 95+%
| 4052-30-6 |
|
Methyl Alpha-Chloroacrylate, 99% (GC)
| 80-63-7 |
|
Lumichrome
| 1086-80-2 |
|
Bisphenol A Diacetate, 99 +%
| 10192-62-8 |
|
3,4,5-Trimethoxyphenylacetic Acid, 99%
| 951-82-6 |
|
|