Search   
MSDS 
:
 2-Bromo-4-fluorotoluene, 97+%
CAS 
:
 1422-53-3
SYNONYMS 
:
 2-Bromo-4-fluoro-1-methylbenzene
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1422-53-3 |2-Bromo-4-fluorotoluene | 97+% | 215-830-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Combustible
liquid.The toxicological properties of this material have not been
fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Combustible
liquid.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Wash area with soap and water.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 1422-53-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear faint yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 170 - 172 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 64 deg C ( 147.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 1.5260g/cm3
Molecular Formula: C7H6BrF
Molecular Weight: 189.03

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Has not been fully evaluated.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas, hydrogen
bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1422-53-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Bromo-4-fluorotoluene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 1422-53-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1422-53-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1422-53-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3,4-Diacetoxy-1-Butene, 97% (GC) 18085-02-4
3-Cyano-4,6-Dimethyl-2-Hydroxypyridine, 97% 769-28-8
Tetramethylammonium Bromide 64-20-0
Sulfanilyl Fluoride 98-62-4
4-Chloro-2-Nitroaniline, 99% 89-63-4
Ethyl Picolinate, 99% 2524-52-9
Allyl heptanoate, 98+% 142-19-8
4-Hydroxypyrazolo(3,4-d)pyrimidine, 98% 315-30-0
2-Ethoxy-3-Buten-1-ol 34684-08-7
4-Phenyl-2-Butyl Acetate, 98+% 10415-88-0
2-Bromo-4-fluorotoluene, 97+% 1422-53-3
Glycidyl phenyl ether, 99% 122-60-1
Benzyl bromide, 98% 100-39-0
P-tert.-butyl-1,3-dihydroxy-2,4-dimercaptocalix(4)arene
2',4'-Difluoropropiophenone, 98% 85068-30-0
4,4'Bicyclo??2.2.2??hept-2-Ylidenebisphenol 1943-96-0
1-Methoxy-4-Nitronaphthalene 4900-63-4
3,4-Dimethylphenol, 99% 95-65-8
Dipropylsulfide, 98+% 111-47-7
4-Methylpiperidine, 99% 626-58-4
4-Methyl-5-thiazoleethanol, 98% 137-00-8
2-Acetamidofluorene, 95+% 53-96-3
2-Chloro-6-Fluorophenylacetic Acid, 98% 37777-76-7
(2r,3s)-1-carboxy-4-pentyl-2,3-dihydroxy- cyclohexa-4,6-diene
(R)-(-)-2-Amino-2-methylbutanedioic acid, 99+% (80% e.e.) 14603-76-0
Iodine Solution According to WIJS, 0.1 Mol ICl/l 64-19-7
2-Ethylbutyryl Chloride, 99% (Titr.) 2736-40-5
(1S,2S)-(-)-N,N'-Dimethyl-1,2-Diphenyl-1,2 -Ethane Diamine, 99% 70749-06-3
alpha, alpha-Diphenyl-gamma-butyrolactone, tech. 959-33-1
1-Naphthol-3,6-disulfonic acid, disodium salt, tech. 20349-39-7
Dibenzyl phosphite, tech. 17176-77-1
1,3-Dichloro-5,5-Dimethylhydantoin Min. Available Chlorine 68% 118-52-5
1-Phenyl-1-cyclopropanecarbonitrile, 97% 935-44-4
Ethyl Cyanoacetate, 98+% 105-56-6
Propylene sulfide, 98% 1072-43-1
N,N-Dimethyl-1,4-phenylenediamine sulfate, (2:1) 99% (titr.) 60160-75-0
2-Hydroxypyridine, 97% 142-08-5
5,6,7,8-Tetrahydro-1-naphthol, 99% 529-35-1
2-(Tetrahydrofurfuryloxy)-Tetrahydropyran 98% 710-14-5
1-Bromohexane, 99+% 111-25-1
5-Chloro-2-Methylaniline, 98% 95-79-4
1,2-Difluoro-4-iodobenzene, 99% 64248-58-4
3-Methyl-1-phenyl-1H-pyrazole 1128-54-7
1-Dodecyne, 98% 765-03-7
Fast Red TR Salt 3165-93-3
4-Methylsulphonylbenzoic Acid, 95+% 4052-30-6
Methyl Alpha-Chloroacrylate, 99% (GC) 80-63-7
Lumichrome 1086-80-2
Bisphenol A Diacetate, 99 +% 10192-62-8
3,4,5-Trimethoxyphenylacetic Acid, 99% 951-82-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net