**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 95-65-8 |3,4-Dimethylphenol | 99% | 202-439-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 34 24/25
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns. Toxic in contact with skin and if swallowed.
Potential Health Effects
Eye:
Causes eye irritation. May cause eye burns.
Skin:
Causes skin irritation. May cause skin burns.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Chronic ingestion may cause effects similar to those of acute
ingestion.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Keep away from
heat, sparks and flame. Avoid ingestion and inhalation.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 95-65-8:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: 10 mm Hg @107.7
Viscosity: Not available.
Boiling Point: 227 deg C
Freezing/Melting Point: 65-68C
Autoignition Temperature: Not available.
Flash Point: 61 deg C ( 141.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: 0.983
Molecular Formula: C8H10O
Molecular Weight: 122.17
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Bases - acid chlorides - acid anhydrides - oxidizing agents -
corrodes steel - brass - copper - copper alloys.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 95-65-8: ZE6300000
LD50/LC50:
CAS# 95-65-8: Oral, mouse: LD50 = 400 mg/kg; Oral, mouse: LD50 =
400000 mg/m3; Oral, rabbit: LD50 = 800 mg/kg; Oral, rabbit: LD50 =
800000 mg/m3; Oral, rat: LD50 = 727 mg/kg; Oral, rat: LD50 = 727000
mg/m3.
Carcinogenicity:
3,4-Dimethylphenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Ecotoxicity:
cfr. DOSE
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: XYLENOLS
Hazard Class: 6.1
UN Number: 2261
Packing Group: II
IMO
Shipping Name: XYLENOLS, SOLID
Hazard Class: 6.1
UN Number: 2261
Packing Group: II
RID/ADR
Shipping Name: XYLENOLS
Hazard Class: 6.1
UN Number: 2261
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 24/25 Toxic in contact with skin and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 2 Keep out of reach of children.
S 28A After contact with skin, wash immediately with
plenty of water.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 95-65-8: 2
Canada
CAS# 95-65-8 is listed on Canada's DSL List.
CAS# 95-65-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 95-65-8 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3,4-Diacetoxy-1-Butene, 97% (GC)
| 18085-02-4 |
|
3-Cyano-4,6-Dimethyl-2-Hydroxypyridine, 97%
| 769-28-8 |
|
Tetramethylammonium Bromide
| 64-20-0 |
|
Sulfanilyl Fluoride
| 98-62-4 |
|
4-Chloro-2-Nitroaniline, 99%
| 89-63-4 |
|
Ethyl Picolinate, 99%
| 2524-52-9 |
|
Allyl heptanoate, 98+%
| 142-19-8 |
|
4-Hydroxypyrazolo(3,4-d)pyrimidine, 98%
| 315-30-0 |
|
2-Ethoxy-3-Buten-1-ol
| 34684-08-7 |
|
4-Phenyl-2-Butyl Acetate, 98+%
| 10415-88-0 |
|
2-Bromo-4-fluorotoluene, 97+%
| 1422-53-3 |
|
Glycidyl phenyl ether, 99%
| 122-60-1 |
|
Benzyl bromide, 98%
| 100-39-0 |
|
P-tert.-butyl-1,3-dihydroxy-2,4-dimercaptocalix(4)arene
| |
|
2',4'-Difluoropropiophenone, 98%
| 85068-30-0 |
|
4,4'Bicyclo??2.2.2??hept-2-Ylidenebisphenol
| 1943-96-0 |
|
1-Methoxy-4-Nitronaphthalene
| 4900-63-4 |
|
3,4-Dimethylphenol, 99%
| 95-65-8 |
|
Dipropylsulfide, 98+%
| 111-47-7 |
|
4-Methylpiperidine, 99%
| 626-58-4 |
|
4-Methyl-5-thiazoleethanol, 98%
| 137-00-8 |
|
2-Acetamidofluorene, 95+%
| 53-96-3 |
|
2-Chloro-6-Fluorophenylacetic Acid, 98%
| 37777-76-7 |
|
(2r,3s)-1-carboxy-4-pentyl-2,3-dihydroxy- cyclohexa-4,6-diene
| |
|
(R)-(-)-2-Amino-2-methylbutanedioic acid, 99+% (80% e.e.)
| 14603-76-0 |
|
Iodine Solution According to WIJS, 0.1 Mol ICl/l
| 64-19-7 |
|
2-Ethylbutyryl Chloride, 99% (Titr.)
| 2736-40-5 |
|
(1S,2S)-(-)-N,N'-Dimethyl-1,2-Diphenyl-1,2 -Ethane Diamine, 99%
| 70749-06-3 |
|
alpha, alpha-Diphenyl-gamma-butyrolactone, tech.
| 959-33-1 |
|
1-Naphthol-3,6-disulfonic acid, disodium salt, tech.
| 20349-39-7 |
|
Dibenzyl phosphite, tech.
| 17176-77-1 |
|
1,3-Dichloro-5,5-Dimethylhydantoin Min. Available Chlorine 68%
| 118-52-5 |
|
1-Phenyl-1-cyclopropanecarbonitrile, 97%
| 935-44-4 |
|
Ethyl Cyanoacetate, 98+%
| 105-56-6 |
|
Propylene sulfide, 98%
| 1072-43-1 |
|
N,N-Dimethyl-1,4-phenylenediamine sulfate, (2:1) 99% (titr.)
| 60160-75-0 |
|
2-Hydroxypyridine, 97%
| 142-08-5 |
|
5,6,7,8-Tetrahydro-1-naphthol, 99%
| 529-35-1 |
|
2-(Tetrahydrofurfuryloxy)-Tetrahydropyran 98%
| 710-14-5 |
|
1-Bromohexane, 99+%
| 111-25-1 |
|
5-Chloro-2-Methylaniline, 98%
| 95-79-4 |
|
1,2-Difluoro-4-iodobenzene, 99%
| 64248-58-4 |
|
3-Methyl-1-phenyl-1H-pyrazole
| 1128-54-7 |
|
1-Dodecyne, 98%
| 765-03-7 |
|
Fast Red TR Salt
| 3165-93-3 |
|
4-Methylsulphonylbenzoic Acid, 95+%
| 4052-30-6 |
|
Methyl Alpha-Chloroacrylate, 99% (GC)
| 80-63-7 |
|
Lumichrome
| 1086-80-2 |
|
Bisphenol A Diacetate, 99 +%
| 10192-62-8 |
|
3,4,5-Trimethoxyphenylacetic Acid, 99%
| 951-82-6 |
|
|