**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 626-58-4 |4-Methylpiperidine | 99 | 210-954-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have
not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation. Vapors may cause dizziness
or suffocation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Use agent most appropriate to
extinguish fire. Do NOT use straight streams of water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Use with adequate ventilation. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep away from heat, sparks and flame.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 626-58-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Clear liquid
Color: clear colorless to slightly yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: 50 hPa @ 45 C
Viscosity: Not available.
Boiling Point: 124 deg C @ 760.00mmHg
Freezing/Melting Point: -4 deg C
Autoignition Temperature: Not available.
Flash Point: 7 deg C ( 44.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible
Specific Gravity/Density: .8380g/cm3
Molecular Formula: C6H13N
Molecular Weight: 99.18
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, carbon dioxide, acid anhydrides, acid
chlorides.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 626-58-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Methylpiperidine -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 626-58-4: 2
Canada
CAS# 626-58-4 is listed on Canada's NDSL List.
CAS# 626-58-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 626-58-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 11/22/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3,4-Diacetoxy-1-Butene, 97% (GC)
| 18085-02-4 |
|
3-Cyano-4,6-Dimethyl-2-Hydroxypyridine, 97%
| 769-28-8 |
|
Tetramethylammonium Bromide
| 64-20-0 |
|
Sulfanilyl Fluoride
| 98-62-4 |
|
4-Chloro-2-Nitroaniline, 99%
| 89-63-4 |
|
Ethyl Picolinate, 99%
| 2524-52-9 |
|
Allyl heptanoate, 98+%
| 142-19-8 |
|
4-Hydroxypyrazolo(3,4-d)pyrimidine, 98%
| 315-30-0 |
|
2-Ethoxy-3-Buten-1-ol
| 34684-08-7 |
|
4-Phenyl-2-Butyl Acetate, 98+%
| 10415-88-0 |
|
2-Bromo-4-fluorotoluene, 97+%
| 1422-53-3 |
|
Glycidyl phenyl ether, 99%
| 122-60-1 |
|
Benzyl bromide, 98%
| 100-39-0 |
|
P-tert.-butyl-1,3-dihydroxy-2,4-dimercaptocalix(4)arene
| |
|
2',4'-Difluoropropiophenone, 98%
| 85068-30-0 |
|
4,4'Bicyclo??2.2.2??hept-2-Ylidenebisphenol
| 1943-96-0 |
|
1-Methoxy-4-Nitronaphthalene
| 4900-63-4 |
|
3,4-Dimethylphenol, 99%
| 95-65-8 |
|
Dipropylsulfide, 98+%
| 111-47-7 |
|
4-Methylpiperidine, 99%
| 626-58-4 |
|
4-Methyl-5-thiazoleethanol, 98%
| 137-00-8 |
|
2-Acetamidofluorene, 95+%
| 53-96-3 |
|
2-Chloro-6-Fluorophenylacetic Acid, 98%
| 37777-76-7 |
|
(2r,3s)-1-carboxy-4-pentyl-2,3-dihydroxy- cyclohexa-4,6-diene
| |
|
(R)-(-)-2-Amino-2-methylbutanedioic acid, 99+% (80% e.e.)
| 14603-76-0 |
|
Iodine Solution According to WIJS, 0.1 Mol ICl/l
| 64-19-7 |
|
2-Ethylbutyryl Chloride, 99% (Titr.)
| 2736-40-5 |
|
(1S,2S)-(-)-N,N'-Dimethyl-1,2-Diphenyl-1,2 -Ethane Diamine, 99%
| 70749-06-3 |
|
alpha, alpha-Diphenyl-gamma-butyrolactone, tech.
| 959-33-1 |
|
1-Naphthol-3,6-disulfonic acid, disodium salt, tech.
| 20349-39-7 |
|
Dibenzyl phosphite, tech.
| 17176-77-1 |
|
1,3-Dichloro-5,5-Dimethylhydantoin Min. Available Chlorine 68%
| 118-52-5 |
|
1-Phenyl-1-cyclopropanecarbonitrile, 97%
| 935-44-4 |
|
Ethyl Cyanoacetate, 98+%
| 105-56-6 |
|
Propylene sulfide, 98%
| 1072-43-1 |
|
N,N-Dimethyl-1,4-phenylenediamine sulfate, (2:1) 99% (titr.)
| 60160-75-0 |
|
2-Hydroxypyridine, 97%
| 142-08-5 |
|
5,6,7,8-Tetrahydro-1-naphthol, 99%
| 529-35-1 |
|
2-(Tetrahydrofurfuryloxy)-Tetrahydropyran 98%
| 710-14-5 |
|
1-Bromohexane, 99+%
| 111-25-1 |
|
5-Chloro-2-Methylaniline, 98%
| 95-79-4 |
|
1,2-Difluoro-4-iodobenzene, 99%
| 64248-58-4 |
|
3-Methyl-1-phenyl-1H-pyrazole
| 1128-54-7 |
|
1-Dodecyne, 98%
| 765-03-7 |
|
Fast Red TR Salt
| 3165-93-3 |
|
4-Methylsulphonylbenzoic Acid, 95+%
| 4052-30-6 |
|
Methyl Alpha-Chloroacrylate, 99% (GC)
| 80-63-7 |
|
Lumichrome
| 1086-80-2 |
|
Bisphenol A Diacetate, 99 +%
| 10192-62-8 |
|
3,4,5-Trimethoxyphenylacetic Acid, 99%
| 951-82-6 |
|
|