Search   
MSDS 
:
 Calcium Chloride Dihydrate, P.A.
CAS 
:
 10035-04-8
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10035-04-8 |Calcium Chloride, Dihydrate | 100.0 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
Contact with skin causes irritation and possible burns, especially
if the skin is wet or moist.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns. May cause cardiac disturbances. May be
harmful if swallowed.
Inhalation:
May cause severe irritation of the upper respiratory tract with
pain, burns, and inflammation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Wear appropriate protective clothing to prevent contact with skin
and eyes. Wear a self-contained breathing apparatus (SCBA) to
prevent contact with thermal decomposition products.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Keep container tightly
closed. Do not get on skin or in eyes. Do not ingest or inhale. Wash
clothing before reuse. Always use cool water when dissolving calcium
chloride. Heat evolved is significant.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture. Store below melting point.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 10035-04-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear impervious gloves.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: odorless
pH: 4.5-8.5: 5% solution
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 2912 deg F
Freezing/Melting Point: 500 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density: 1.85 (water=1)
Molecular Formula: CaCl2.2H2O
Molecular Weight: 147.0128

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Dust generation, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Bromine trifluoride, 2-Furanpercarboxylic Acid, Solutions attack some
metals..
Hazardous Decomposition Products:
Hydrogen chloride, calcium oxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10035-04-8: EV9810000
LD50/LC50:
Not available.
Carcinogenicity:
Calcium Chloride, Dihydrate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36 Irritating to eyes.
Safety Phrases:
S 22 Do not breathe dust.
S 24 Avoid contact with skin.
WGK (Water Danger/Protection)
CAS# 10035-04-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 10035-04-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10035-04-8 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/03/1998 Revision #4 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Potassium Iodide, 99%, Briquettes 7681-11-0
Potassium Iodide, 99.995% 7681-11-0
Palladium on carbon (10%) (50% wet with water for safety) 7440-05-3
Ruthenium(IV) Oxide, Anhydrous, 99.5+% 12036-10-1
Carbazole, 99% (UV-Vis) 86-74-8
Calcium Carbonate, 98.5% 471-34-1
Calcium Carbonate (Chips), 97% (Titr.) 471-34-1
Ethyl 2-benzylacetoacetate, 97% 620-79-1
2-(4-Nitrophenoxy)tetradecanoyl Chloride, 92% (HPLC) 116526-84-2
Calcium Carbonate, Light Powder 471-34-1
1,5-Difluoro-2,4-dinitrobenzene, 97 % 327-92-4
Calcium Carbonate, Reagent ACS (Powder), 99+% (Titr.) 471-34-1
Calcium Carbonate, P.A. (Precipitated, Heavy) 471-34-1
Calcium Carbonate, Low in Alkalies, Reagent ACS (Powder), 99+% 471-34-1
Calcium Chloride, Anhydrous Powder, 95%, P.A. 10043-52-4
Calcium Chloride Dihydrate 77 - 80% CaCl2 Flakes for Drying Purposes 10035-04-8
Calcium Chloride Dihydrate, P.A. 10035-04-8
Calcium Chloride Dihydrate, Reagent ACS 10035-04-8
Hydrochloric Acid, 0.1 N Solution 7647-01-0
Calcium Fluoride, 99%, Anhydrous 7789-75-5
Benzoyl Chloride, 99% 98-88-4
Deoxycholic acid, sodium salt, 99% 302-95-4
Methyl myristate 99% 124-10-7
Methyltriphenoxyphosphonium iodide 17579-99-6
Copper phthalocyanine-3,4',4",4"'-tetrasul fonic acid,tetrasodium 123439-80-5
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 97% 67-42-5
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 99% 67-42-5
Poly(Methyl Methacrylate), Average M.W. 15000(GPC) 9011-14-7
Poly(Methyl Methacrylate), Sec. Stand., M. W. 93300, N.N. 46400, Fine 9011-14-7
Poly(Methyl Methacrylate), Nominal M.W. 38000, Beads 9011-14-7
Poly(Methyl Methacrylate), Average M.W. 500.000 9011-14-7
Heparin Sodium 9041-08-1
Iodine, reagent ACS, 99.8% 7553-56-2
Iodine, resublimed, p.a. 7553-56-2
Iodine, 0.1N Standard Solution 7553-56-2
3,3'-Diethyloxadicarbocyanine Iodide, Laser Grade, 99% (UV-Vis) 14806-50-9
Copper (II) Chloride Dihydrate, Tech., 95% 10125-13-0
Copper (II) Chloride Dihydrate, Reagent (Powder), 99% (Titr.) 10125-13-0
Copper (II) Chloride Dihydrate, P.A. 10125-13-0
Copper (I) Chloride, 95+% 7758-89-6
Copper (I) Chloride, Purified, 99% 7758-89-6
3-Hexyn-1-ol, 98% 1002-28-4
Copper (I) Chloride, 99.99% 7758-89-6
Copper (I) Chloride, P.A. 7758-89-6
Copper (I) Chloride, Reagent ACS (Powder), 90+% (Titr.) 7758-89-6
Cyclohexane, Reagent ACS, Spectro Grade, 99+% (GC) 110-82-7
Cyclohexane, 99+% 110-82-7
Cyclohexane, P.A. 110-82-7
Cyclohexane for HPLC 110-82-7
Ammonium molybdate(VI) tetrahydrate, p.a. 12027-67-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net