**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 327-92-4 |1,5-Difluoro-2,4-dinitrobenzene | 97 | 206-324-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25 33
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Toxic if swallowed. Danger of cumulative effects.The toxicological
properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Harmful if swallowed. The toxicological properties of this substance
have not been fully investigated. May cause central nervous system
effects.
Inhalation:
The toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Do not ingest or inhale.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 327-92-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 70-75 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Moderately Soluble.
Specific Gravity/Density:
Molecular Formula: C6H2F2N2O4
Molecular Weight: 204.09
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable, however, may violently decompose at temperatures above
175C.
Conditions to Avoid:
Excess heat, temperatures above 75C (167F).
Incompatibilities with Other Materials:
Strong bases - strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide, hydrogen
fluoride gas.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 327-92-4: CZ5663200
LD50/LC50:
CAS# 327-92-4: Dermal, guinea pig: LD50 = >1 gm/kg; Oral, mouse:
LD50 = 25 mg/kg; Oral, rat: LD50 = 50 mg/kg.
Oral, rat: LD50 = 50-100
Carcinogenicity:
1,5-Difluoro-2,4-dinitrobenzene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
R 33 Danger of cumulative effects.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 327-92-4: No information available.
Canada
CAS# 327-92-4 is listed on Canada's NDSL List.
CAS# 327-92-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 327-92-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/14/1998 Revision #3 Date: 10/08/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Potassium Iodide, 99%, Briquettes
| 7681-11-0 |
|
Potassium Iodide, 99.995%
| 7681-11-0 |
|
Palladium on carbon (10%) (50% wet with water for safety)
| 7440-05-3 |
|
Ruthenium(IV) Oxide, Anhydrous, 99.5+%
| 12036-10-1 |
|
Carbazole, 99% (UV-Vis)
| 86-74-8 |
|
Calcium Carbonate, 98.5%
| 471-34-1 |
|
Calcium Carbonate (Chips), 97% (Titr.)
| 471-34-1 |
|
Ethyl 2-benzylacetoacetate, 97%
| 620-79-1 |
|
2-(4-Nitrophenoxy)tetradecanoyl Chloride, 92% (HPLC)
| 116526-84-2 |
|
Calcium Carbonate, Light Powder
| 471-34-1 |
|
1,5-Difluoro-2,4-dinitrobenzene, 97 %
| 327-92-4 |
|
Calcium Carbonate, Reagent ACS (Powder), 99+% (Titr.)
| 471-34-1 |
|
Calcium Carbonate, P.A. (Precipitated, Heavy)
| 471-34-1 |
|
Calcium Carbonate, Low in Alkalies, Reagent ACS (Powder), 99+%
| 471-34-1 |
|
Calcium Chloride, Anhydrous Powder, 95%, P.A.
| 10043-52-4 |
|
Calcium Chloride Dihydrate 77 - 80% CaCl2 Flakes for Drying Purposes
| 10035-04-8 |
|
Calcium Chloride Dihydrate, P.A.
| 10035-04-8 |
|
Calcium Chloride Dihydrate, Reagent ACS
| 10035-04-8 |
|
Hydrochloric Acid, 0.1 N Solution
| 7647-01-0 |
|
Calcium Fluoride, 99%, Anhydrous
| 7789-75-5 |
|
Benzoyl Chloride, 99%
| 98-88-4 |
|
Deoxycholic acid, sodium salt, 99%
| 302-95-4 |
|
Methyl myristate 99%
| 124-10-7 |
|
Methyltriphenoxyphosphonium iodide
| 17579-99-6 |
|
Copper phthalocyanine-3,4',4",4"'-tetrasul fonic acid,tetrasodium
| 123439-80-5 |
|
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 97%
| 67-42-5 |
|
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 99%
| 67-42-5 |
|
Poly(Methyl Methacrylate), Average M.W. 15000(GPC)
| 9011-14-7 |
|
Poly(Methyl Methacrylate), Sec. Stand., M. W. 93300, N.N. 46400, Fine
| 9011-14-7 |
|
Poly(Methyl Methacrylate), Nominal M.W. 38000, Beads
| 9011-14-7 |
|
Poly(Methyl Methacrylate), Average M.W. 500.000
| 9011-14-7 |
|
Heparin Sodium
| 9041-08-1 |
|
Iodine, reagent ACS, 99.8%
| 7553-56-2 |
|
Iodine, resublimed, p.a.
| 7553-56-2 |
|
Iodine, 0.1N Standard Solution
| 7553-56-2 |
|
3,3'-Diethyloxadicarbocyanine Iodide, Laser Grade, 99% (UV-Vis)
| 14806-50-9 |
|
Copper (II) Chloride Dihydrate, Tech., 95%
| 10125-13-0 |
|
Copper (II) Chloride Dihydrate, Reagent (Powder), 99% (Titr.)
| 10125-13-0 |
|
Copper (II) Chloride Dihydrate, P.A.
| 10125-13-0 |
|
Copper (I) Chloride, 95+%
| 7758-89-6 |
|
Copper (I) Chloride, Purified, 99%
| 7758-89-6 |
|
3-Hexyn-1-ol, 98%
| 1002-28-4 |
|
Copper (I) Chloride, 99.99%
| 7758-89-6 |
|
Copper (I) Chloride, P.A.
| 7758-89-6 |
|
Copper (I) Chloride, Reagent ACS (Powder), 90+% (Titr.)
| 7758-89-6 |
|
Cyclohexane, Reagent ACS, Spectro Grade, 99+% (GC)
| 110-82-7 |
|
Cyclohexane, 99+%
| 110-82-7 |
|
Cyclohexane, P.A.
| 110-82-7 |
|
Cyclohexane for HPLC
| 110-82-7 |
|
Ammonium molybdate(VI) tetrahydrate, p.a.
| 12027-67-7 |
|
|