Search   
MSDS 
:
 Copper phthalocyanine-3,4',4",4"'-tetrasul fonic acid,tetrasodium
CAS 
:
 123439-80-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 123439-80-5 |Copper phthalocyanine-3,4',4'',4'''-te| | unlisted |
| |trasulfonic acid, tetrasodium salt | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Individuals with Wilson's disease are unable to metabolize copper.
Thus, copper accumulates in various tissues and may result in liver,
kidney, and brain damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 123439-80-5:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 576.08

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon
dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 123439-80-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Copper phthalocyanine-3,4',4'',4'''-tetrasulfonic acid, tetrasodium
salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 123439-80-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 123439-80-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 123439-80-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Potassium Iodide, 99%, Briquettes 7681-11-0
Potassium Iodide, 99.995% 7681-11-0
Palladium on carbon (10%) (50% wet with water for safety) 7440-05-3
Ruthenium(IV) Oxide, Anhydrous, 99.5+% 12036-10-1
Carbazole, 99% (UV-Vis) 86-74-8
Calcium Carbonate, 98.5% 471-34-1
Calcium Carbonate (Chips), 97% (Titr.) 471-34-1
Ethyl 2-benzylacetoacetate, 97% 620-79-1
2-(4-Nitrophenoxy)tetradecanoyl Chloride, 92% (HPLC) 116526-84-2
Calcium Carbonate, Light Powder 471-34-1
1,5-Difluoro-2,4-dinitrobenzene, 97 % 327-92-4
Calcium Carbonate, Reagent ACS (Powder), 99+% (Titr.) 471-34-1
Calcium Carbonate, P.A. (Precipitated, Heavy) 471-34-1
Calcium Carbonate, Low in Alkalies, Reagent ACS (Powder), 99+% 471-34-1
Calcium Chloride, Anhydrous Powder, 95%, P.A. 10043-52-4
Calcium Chloride Dihydrate 77 - 80% CaCl2 Flakes for Drying Purposes 10035-04-8
Calcium Chloride Dihydrate, P.A. 10035-04-8
Calcium Chloride Dihydrate, Reagent ACS 10035-04-8
Hydrochloric Acid, 0.1 N Solution 7647-01-0
Calcium Fluoride, 99%, Anhydrous 7789-75-5
Benzoyl Chloride, 99% 98-88-4
Deoxycholic acid, sodium salt, 99% 302-95-4
Methyl myristate 99% 124-10-7
Methyltriphenoxyphosphonium iodide 17579-99-6
Copper phthalocyanine-3,4',4",4"'-tetrasul fonic acid,tetrasodium 123439-80-5
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 97% 67-42-5
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 99% 67-42-5
Poly(Methyl Methacrylate), Average M.W. 15000(GPC) 9011-14-7
Poly(Methyl Methacrylate), Sec. Stand., M. W. 93300, N.N. 46400, Fine 9011-14-7
Poly(Methyl Methacrylate), Nominal M.W. 38000, Beads 9011-14-7
Poly(Methyl Methacrylate), Average M.W. 500.000 9011-14-7
Heparin Sodium 9041-08-1
Iodine, reagent ACS, 99.8% 7553-56-2
Iodine, resublimed, p.a. 7553-56-2
Iodine, 0.1N Standard Solution 7553-56-2
3,3'-Diethyloxadicarbocyanine Iodide, Laser Grade, 99% (UV-Vis) 14806-50-9
Copper (II) Chloride Dihydrate, Tech., 95% 10125-13-0
Copper (II) Chloride Dihydrate, Reagent (Powder), 99% (Titr.) 10125-13-0
Copper (II) Chloride Dihydrate, P.A. 10125-13-0
Copper (I) Chloride, 95+% 7758-89-6
Copper (I) Chloride, Purified, 99% 7758-89-6
3-Hexyn-1-ol, 98% 1002-28-4
Copper (I) Chloride, 99.99% 7758-89-6
Copper (I) Chloride, P.A. 7758-89-6
Copper (I) Chloride, Reagent ACS (Powder), 90+% (Titr.) 7758-89-6
Cyclohexane, Reagent ACS, Spectro Grade, 99+% (GC) 110-82-7
Cyclohexane, 99+% 110-82-7
Cyclohexane, P.A. 110-82-7
Cyclohexane for HPLC 110-82-7
Ammonium molybdate(VI) tetrahydrate, p.a. 12027-67-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net