Search   
MSDS 
:
 Ammonium molybdate(VI) tetrahydrate, p.a.
CAS 
:
 12027-67-7
SYNONYMS 
:
 Ammonium heptamolybdate ((NH4)6Mo7O24) tetrahydrate; Ammonium     paramolybdate tetrahydrate; Moybdic acid (H6Mo7O24), hexaammonium     salt, tetrahydrate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 12054-85-2 |Ammonium molybdate(VI) tetrahydrate | >99 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea.
Inhalation:
Causes upper respiratory tract irritation. Causes irritation of the
mucous membrane.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid if cough or other symptoms
appear. Do NOT use mouth-to-mouth resuscitation. If breathing has
ceased apply artificial respiration using oxygen and a suitable
mechanical device such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Substance
is noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Minimize
dust generation and accumulation. Avoid contact with eyes, skin, and
clothing. Use only with adequate ventilation. Avoid breathing dust.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits. Facilities storing or utilizing this material should
be equipped with an eyewash facility and a safety shower.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white or yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Not applicable.
Viscosity: Not applicable.
Boiling Point: decomposes
Freezing/Melting Point: 190 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: 2.49
Molecular Formula: (NH4)6Mo7O24.4H2O
Molecular Weight: 1235.86

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, ammonia and/or derivatives, oxides of molybdenum.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 12027-67-7: QA5076000
CAS# 12054-85-2 unlisted.
LD50/LC50:
Not available.
Not available.
Oral median lethal dose for daily repeated doses was found to be 333
mg Mo/kg/day (up to 232 days) for ammonium molybdate. This is not an
acute oral LD50 value, which is a dose administered once.
Carcinogenicity:
Ammonium molybdate(VI) anhydrous -
Not listed by ACGIH, IARC, or NTP.
Ammonium molybdate(VI) tetrahydrate -
Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 22 Do not breathe dust.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 12027-67-7: 1
CAS# 12054-85-2: 1
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
CAS# 12027-67-7 is listed on Canada's DSL List.
CAS# 12027-67-7 is listed on Canada's Ingredient Disclosure List.
CAS# 12054-85-2 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 12054-85-2: Not available.
US FEDERAL
TSCA
CAS# 12027-67-7 is listed on the TSCA inventory.
CAS# 12054-85-2 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #7 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Potassium Iodide, 99%, Briquettes 7681-11-0
Potassium Iodide, 99.995% 7681-11-0
Palladium on carbon (10%) (50% wet with water for safety) 7440-05-3
Ruthenium(IV) Oxide, Anhydrous, 99.5+% 12036-10-1
Carbazole, 99% (UV-Vis) 86-74-8
Calcium Carbonate, 98.5% 471-34-1
Calcium Carbonate (Chips), 97% (Titr.) 471-34-1
Ethyl 2-benzylacetoacetate, 97% 620-79-1
2-(4-Nitrophenoxy)tetradecanoyl Chloride, 92% (HPLC) 116526-84-2
Calcium Carbonate, Light Powder 471-34-1
1,5-Difluoro-2,4-dinitrobenzene, 97 % 327-92-4
Calcium Carbonate, Reagent ACS (Powder), 99+% (Titr.) 471-34-1
Calcium Carbonate, P.A. (Precipitated, Heavy) 471-34-1
Calcium Carbonate, Low in Alkalies, Reagent ACS (Powder), 99+% 471-34-1
Calcium Chloride, Anhydrous Powder, 95%, P.A. 10043-52-4
Calcium Chloride Dihydrate 77 - 80% CaCl2 Flakes for Drying Purposes 10035-04-8
Calcium Chloride Dihydrate, P.A. 10035-04-8
Calcium Chloride Dihydrate, Reagent ACS 10035-04-8
Hydrochloric Acid, 0.1 N Solution 7647-01-0
Calcium Fluoride, 99%, Anhydrous 7789-75-5
Benzoyl Chloride, 99% 98-88-4
Deoxycholic acid, sodium salt, 99% 302-95-4
Methyl myristate 99% 124-10-7
Methyltriphenoxyphosphonium iodide 17579-99-6
Copper phthalocyanine-3,4',4",4"'-tetrasul fonic acid,tetrasodium 123439-80-5
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 97% 67-42-5
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 99% 67-42-5
Poly(Methyl Methacrylate), Average M.W. 15000(GPC) 9011-14-7
Poly(Methyl Methacrylate), Sec. Stand., M. W. 93300, N.N. 46400, Fine 9011-14-7
Poly(Methyl Methacrylate), Nominal M.W. 38000, Beads 9011-14-7
Poly(Methyl Methacrylate), Average M.W. 500.000 9011-14-7
Heparin Sodium 9041-08-1
Iodine, reagent ACS, 99.8% 7553-56-2
Iodine, resublimed, p.a. 7553-56-2
Iodine, 0.1N Standard Solution 7553-56-2
3,3'-Diethyloxadicarbocyanine Iodide, Laser Grade, 99% (UV-Vis) 14806-50-9
Copper (II) Chloride Dihydrate, Tech., 95% 10125-13-0
Copper (II) Chloride Dihydrate, Reagent (Powder), 99% (Titr.) 10125-13-0
Copper (II) Chloride Dihydrate, P.A. 10125-13-0
Copper (I) Chloride, 95+% 7758-89-6
Copper (I) Chloride, Purified, 99% 7758-89-6
3-Hexyn-1-ol, 98% 1002-28-4
Copper (I) Chloride, 99.99% 7758-89-6
Copper (I) Chloride, P.A. 7758-89-6
Copper (I) Chloride, Reagent ACS (Powder), 90+% (Titr.) 7758-89-6
Cyclohexane, Reagent ACS, Spectro Grade, 99+% (GC) 110-82-7
Cyclohexane, 99+% 110-82-7
Cyclohexane, P.A. 110-82-7
Cyclohexane for HPLC 110-82-7
Ammonium molybdate(VI) tetrahydrate, p.a. 12027-67-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net