**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7440-05-3 |Palladium on activated carbon | 10.0 | 231-115-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable.The toxicological properties of this material have not
been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. Vapors may cause dizziness
or suffocation.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire. Use water spray to
keep fire-exposed containers cool. Dusts may be combustible when
exposed to heat, flame, or oxidizing agents. Containers may explode
in the heat of a fire. Flammable solid.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid generating dusty conditions.
Remove all sources of ignition. Use a spark-proof tool. Carefully
scoop up and place into appropriate disposal container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Ground and bond containers when transferring material.
Use spark-proof tools and explosion proof equipment. Avoid breathing
dust, vapor, mist, or gas. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Use
only in a chemical fume hood. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Store under nitrogen.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7440-05-3:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: Not available.
Odor: Odorless
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: Pd
Molecular Weight: 106.42
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, exposure
to air, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, arsenic; carbon; ozonides; sodium
tetrahydroborate; sulfur.Explosive reaction with hydrogen + hydrogen
peroxide. Reaction with formic acid or sodium tetrahydroborate
releases explosive hydrogen gas. Violent reaction with isopropyl
alcohol, OF2S.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7440-05-3: RT3480500 RT3593400
LD50/LC50:
Not available.
Carcinogenicity:
Palladium on activated carbon -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 7440-05-3: 0
Canada
CAS# 7440-05-3 is listed on Canada's DSL List.
CAS# 7440-05-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-05-3 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/19/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Potassium Iodide, 99%, Briquettes
| 7681-11-0 |
|
Potassium Iodide, 99.995%
| 7681-11-0 |
|
Palladium on carbon (10%) (50% wet with water for safety)
| 7440-05-3 |
|
Ruthenium(IV) Oxide, Anhydrous, 99.5+%
| 12036-10-1 |
|
Carbazole, 99% (UV-Vis)
| 86-74-8 |
|
Calcium Carbonate, 98.5%
| 471-34-1 |
|
Calcium Carbonate (Chips), 97% (Titr.)
| 471-34-1 |
|
Ethyl 2-benzylacetoacetate, 97%
| 620-79-1 |
|
2-(4-Nitrophenoxy)tetradecanoyl Chloride, 92% (HPLC)
| 116526-84-2 |
|
Calcium Carbonate, Light Powder
| 471-34-1 |
|
1,5-Difluoro-2,4-dinitrobenzene, 97 %
| 327-92-4 |
|
Calcium Carbonate, Reagent ACS (Powder), 99+% (Titr.)
| 471-34-1 |
|
Calcium Carbonate, P.A. (Precipitated, Heavy)
| 471-34-1 |
|
Calcium Carbonate, Low in Alkalies, Reagent ACS (Powder), 99+%
| 471-34-1 |
|
Calcium Chloride, Anhydrous Powder, 95%, P.A.
| 10043-52-4 |
|
Calcium Chloride Dihydrate 77 - 80% CaCl2 Flakes for Drying Purposes
| 10035-04-8 |
|
Calcium Chloride Dihydrate, P.A.
| 10035-04-8 |
|
Calcium Chloride Dihydrate, Reagent ACS
| 10035-04-8 |
|
Hydrochloric Acid, 0.1 N Solution
| 7647-01-0 |
|
Calcium Fluoride, 99%, Anhydrous
| 7789-75-5 |
|
Benzoyl Chloride, 99%
| 98-88-4 |
|
Deoxycholic acid, sodium salt, 99%
| 302-95-4 |
|
Methyl myristate 99%
| 124-10-7 |
|
Methyltriphenoxyphosphonium iodide
| 17579-99-6 |
|
Copper phthalocyanine-3,4',4",4"'-tetrasul fonic acid,tetrasodium
| 123439-80-5 |
|
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 97%
| 67-42-5 |
|
Ethylenebis(oxyethylenenitrilo)tetraacetic acid, 99%
| 67-42-5 |
|
Poly(Methyl Methacrylate), Average M.W. 15000(GPC)
| 9011-14-7 |
|
Poly(Methyl Methacrylate), Sec. Stand., M. W. 93300, N.N. 46400, Fine
| 9011-14-7 |
|
Poly(Methyl Methacrylate), Nominal M.W. 38000, Beads
| 9011-14-7 |
|
Poly(Methyl Methacrylate), Average M.W. 500.000
| 9011-14-7 |
|
Heparin Sodium
| 9041-08-1 |
|
Iodine, reagent ACS, 99.8%
| 7553-56-2 |
|
Iodine, resublimed, p.a.
| 7553-56-2 |
|
Iodine, 0.1N Standard Solution
| 7553-56-2 |
|
3,3'-Diethyloxadicarbocyanine Iodide, Laser Grade, 99% (UV-Vis)
| 14806-50-9 |
|
Copper (II) Chloride Dihydrate, Tech., 95%
| 10125-13-0 |
|
Copper (II) Chloride Dihydrate, Reagent (Powder), 99% (Titr.)
| 10125-13-0 |
|
Copper (II) Chloride Dihydrate, P.A.
| 10125-13-0 |
|
Copper (I) Chloride, 95+%
| 7758-89-6 |
|
Copper (I) Chloride, Purified, 99%
| 7758-89-6 |
|
3-Hexyn-1-ol, 98%
| 1002-28-4 |
|
Copper (I) Chloride, 99.99%
| 7758-89-6 |
|
Copper (I) Chloride, P.A.
| 7758-89-6 |
|
Copper (I) Chloride, Reagent ACS (Powder), 90+% (Titr.)
| 7758-89-6 |
|
Cyclohexane, Reagent ACS, Spectro Grade, 99+% (GC)
| 110-82-7 |
|
Cyclohexane, 99+%
| 110-82-7 |
|
Cyclohexane, P.A.
| 110-82-7 |
|
Cyclohexane for HPLC
| 110-82-7 |
|
Ammonium molybdate(VI) tetrahydrate, p.a.
| 12027-67-7 |
|
|