Search   
MSDS 
:
 Sodium Hypophosphite Monohydrate, 99%
CAS 
:
 10039-56-2
SYNONYMS 
:
 Phosphinic Acid Sodium Salt Monohydrate; Sodium Hypophosphite     Monohydrate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10039-56-2 |Sodium Hypophosphite Monohydrate | >98 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of soap and water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. Combustion generates toxic fumes.
Decomposes generating flammable and toxic phosphine gas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Remove all sources of ignition. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with skin and eyes. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Appearance: white
Odor: odorless
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: Decomposes
Freezing/Melting Point: 90 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: >90 C
Solubility in water: Soluble in water
Specific Gravity/Density: 0.8
Molecular Formula: NaH2PO2.H20
Molecular Weight: 87.9764

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable. However, may decompose if heated.
Conditions to Avoid:
High temperatures, incompatible materials, dust generation, moisture.
Incompatibilities with Other Materials:
Strong oxiziders, moisture.
Hazardous Decomposition Products:
Phosphine, irritating and toxic fumes and gases, toxic fumes of
sodium oxide, hydrogen gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10039-56-2: SZ5640000
LD50/LC50:
CAS# 10039-56-2: Oral, rat: LD50 = 7640 mg/kg.
Carcinogenicity:
Sodium Hypophosphite Monohydrate -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Dangerous Goods Code:
UN Number:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 10039-56-2: 2
United Kingdom Occupational Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 10039-56-2 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 10039-56-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/11/1998 Revision #1 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Venfloc 2000, polyaluminium chloride solution, Morton material 0-01-1
Venfloc 1143, polyacrylamide powder, Morton material 9003-05-8
Sodium Chloride, Reagent ACS (Crystals), 99+% (Titr.) 7647-14-5
(1S)-1-(2,5-Dimethoxy-2,5-dihydrofuran-2-yl)ethanol, 98% 33647-67-5
Sodiumborohydride, powder, 98+%, Morton material - 250 gm !!!Bulk 16940-66-2
Propyl formate, 96+% 110-74-7
2,6-Dichloro-5-Fluoro-3-Pyridinecarbonitrile, 95% 0-01-1
3-Methyl-1-Pentanol 589-35-5
Citric acid, trisodium salt dihydrate, 99% 6132-04-3
Sodium hexanitrocobaltate(III) 13600-98-1
(S)-(-)-Indoline-2-carboxylic acid, 98% 79815-20-6
Triallyl-s-triazine-2,4,6(1H,3H,5H)-trione, 98% 1025-15-6
Sodium Cyanide, Reagent ACS (Granular), 95+% (Titr.) 143-33-9
Tetramethylene-d8 sulfone, 99+ atom% D 0-01-1
4-Bromo-1-butene, 98+% (GC) 5162-44-7
2-Bromo-4,5-dimethoxybenzyl alcohol, 98% 54370-00-2
Bisphenol A Dimethylether, 98% 1568-83-8
Sodium dichromate dihydrate, 99% 7789-12-0
2-Bromo-5-Nitrobenzoic Acid 943-14-6
Sodium fluoride, p.a. 7681-49-4
2-Methylformanilide, 98% 94-69-9
Formic acid, sodium salt 141-53-7
Sodium hydrosulfide hydrate, flakes, 68-72% 7732-18-5
Benzophenone Oxime, 98% 574-66-3
Sodium Hydrosulfite 7775-14-6
(+)-cis, trans-Abscisic acid, 99% 21293-29-8
Sodium Hypophosphite Monohydrate, 99% 10039-56-2
Sodium Iodate, Reagent (Powder), 99% (Titr.) 7681-55-2
(S)-N-Carbobenzyloxy-4-Amino-2-Hydroxybutyric Acid, 96% 40371-50-4
Ipriflavone, 99% 35212-22-7
Methyl-6-O-(N-Heptylcarbamoyl)-alpha-D-Glucopyranoside, 99% 115457-83-5
Egg Yolk IgY purification kit 0-01-1
Sodium Iodide, U.S.P./N.F. (Granular), 99% (Titr.) 7681-82-5
Sodium D,L-Lactate,60 wt% Solution in Water 72-17-3
Ampicillin Sodium Salt 69-52-3
Sodium metabisulfite, reagent ACS, 97+% 7446-09-5
Sodium metasilicate, nonahydrate 6834-92-0
Sheep IgG purification kit 0-01-1
Sodium Methoxide, Anhydrous Powder 124-41-4
Methyl 2-Bromo-5-Nitrobenzoic Acid 6942-36-5
1,1,3,5,5-Pentaphenyl-1,3,5-Trimethyltrisiloxane 3390-61-2
2-Amino-2-Indanecarboxylic Acid 27473-62-7
Sodium Nitrite, reagent ACS (crystals), 97+% (titr.) 7632-00-0
Sodium orthovanadate, 99%, - 60 mesh 13721-39-6
3-(2-Naphthyl)-D-Alanine, 99% 76985-09-6
3-[2-(2-Aminoethylamino)ethylamino]propyl-trimethoxysilane, tech. 35141-30-1
Sodium oxalate, p.a. 62-76-0
Sodium periodate, reagent acs 7790-28-5
(-)-(1R,2S)-2-Amino-1-Cyclopentanecarboxylic Acid 0-01-1
Aniline 62-53-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net