Search   
MSDS 
:
 Sodium Chloride, Reagent ACS (Crystals), 99+% (Titr.)
CAS 
:
 7647-14-5
SYNONYMS 
:
 Common salt; Halite; Rock salt; Saline; Salt; Sea salt; Table salt.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7647-14-5 |Sodium chloride | 99+% | 231-598-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of soap and water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Wear appropriate protective clothing to prevent contact with skin
and eyes. Wear a self-contained breathing apparatus (SCBA) to
prevent contact with thermal decomposition products. Substance is
noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use with adequate ventilation. Minimize dust generation and
accumulation. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Do not ingest or inhale.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Good general ventilation should be sufficient to control airborne
levels. Facilities storing or utilizing this material should be
equipped with an eyewash facility and a safety shower.
Personal Protective Equipment

Eyes:
Wear safety glasses with side shields.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Appearance: colorless or white
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 2575 deg F
Freezing/Melting Point: 1474 deg F
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water
Specific Gravity/Density: 2.165
Molecular Formula: NaCl
Molecular Weight: 58.4428

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
High temperatures.
Incompatibilities with Other Materials:
Reacts with most nonnoble metals such as iron or steel, building
materials (such as cement), bromine, or trifluoride. Potentially
explosive reaction with dichloromaleic anhydride + urea. Electrolysis
of mixtures with nitrogen compounds may form explosive nitrogen
trichloride.
Hazardous Decomposition Products:
Toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7647-14-5: VZ4725000
LD50/LC50:
CAS# 7647-14-5: Draize test, rabbit, eye: 100 mg Mild; Draize test,
rabbit, eye: 100 mg/24H Moderate; Draize test, rabbit, eye: 10 mg
Moderate; Draize test, rabbit, skin: 50 mg/24H Mild; Draize test,
rabbit, skin: 500 mg/24H Mild; Inhalation, rat: LC50 = >42 gm/m3/1H;
Oral, mouse: LD50 = 4 gm/kg; Oral, rat: LD50 = 3 gm/kg; Skin, rabbit:
LD50 = >10 gm/kg.
Carcinogenicity:
Sodium chloride -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
No information found.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Shipping Name: Not regulated.
Dangerous Goods Code:
UN Number:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 7647-14-5: 0
United Kingdom Occupational Exposure Limits

Canada
CAS# 7647-14-5 is listed on Canada's DSL List.
CAS# 7647-14-5 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 7647-14-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #4 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Venfloc 2000, polyaluminium chloride solution, Morton material 0-01-1
Venfloc 1143, polyacrylamide powder, Morton material 9003-05-8
Sodium Chloride, Reagent ACS (Crystals), 99+% (Titr.) 7647-14-5
(1S)-1-(2,5-Dimethoxy-2,5-dihydrofuran-2-yl)ethanol, 98% 33647-67-5
Sodiumborohydride, powder, 98+%, Morton material - 250 gm !!!Bulk 16940-66-2
Propyl formate, 96+% 110-74-7
2,6-Dichloro-5-Fluoro-3-Pyridinecarbonitrile, 95% 0-01-1
3-Methyl-1-Pentanol 589-35-5
Citric acid, trisodium salt dihydrate, 99% 6132-04-3
Sodium hexanitrocobaltate(III) 13600-98-1
(S)-(-)-Indoline-2-carboxylic acid, 98% 79815-20-6
Triallyl-s-triazine-2,4,6(1H,3H,5H)-trione, 98% 1025-15-6
Sodium Cyanide, Reagent ACS (Granular), 95+% (Titr.) 143-33-9
Tetramethylene-d8 sulfone, 99+ atom% D 0-01-1
4-Bromo-1-butene, 98+% (GC) 5162-44-7
2-Bromo-4,5-dimethoxybenzyl alcohol, 98% 54370-00-2
Bisphenol A Dimethylether, 98% 1568-83-8
Sodium dichromate dihydrate, 99% 7789-12-0
2-Bromo-5-Nitrobenzoic Acid 943-14-6
Sodium fluoride, p.a. 7681-49-4
2-Methylformanilide, 98% 94-69-9
Formic acid, sodium salt 141-53-7
Sodium hydrosulfide hydrate, flakes, 68-72% 7732-18-5
Benzophenone Oxime, 98% 574-66-3
Sodium Hydrosulfite 7775-14-6
(+)-cis, trans-Abscisic acid, 99% 21293-29-8
Sodium Hypophosphite Monohydrate, 99% 10039-56-2
Sodium Iodate, Reagent (Powder), 99% (Titr.) 7681-55-2
(S)-N-Carbobenzyloxy-4-Amino-2-Hydroxybutyric Acid, 96% 40371-50-4
Ipriflavone, 99% 35212-22-7
Methyl-6-O-(N-Heptylcarbamoyl)-alpha-D-Glucopyranoside, 99% 115457-83-5
Egg Yolk IgY purification kit 0-01-1
Sodium Iodide, U.S.P./N.F. (Granular), 99% (Titr.) 7681-82-5
Sodium D,L-Lactate,60 wt% Solution in Water 72-17-3
Ampicillin Sodium Salt 69-52-3
Sodium metabisulfite, reagent ACS, 97+% 7446-09-5
Sodium metasilicate, nonahydrate 6834-92-0
Sheep IgG purification kit 0-01-1
Sodium Methoxide, Anhydrous Powder 124-41-4
Methyl 2-Bromo-5-Nitrobenzoic Acid 6942-36-5
1,1,3,5,5-Pentaphenyl-1,3,5-Trimethyltrisiloxane 3390-61-2
2-Amino-2-Indanecarboxylic Acid 27473-62-7
Sodium Nitrite, reagent ACS (crystals), 97+% (titr.) 7632-00-0
Sodium orthovanadate, 99%, - 60 mesh 13721-39-6
3-(2-Naphthyl)-D-Alanine, 99% 76985-09-6
3-[2-(2-Aminoethylamino)ethylamino]propyl-trimethoxysilane, tech. 35141-30-1
Sodium oxalate, p.a. 62-76-0
Sodium periodate, reagent acs 7790-28-5
(-)-(1R,2S)-2-Amino-1-Cyclopentanecarboxylic Acid 0-01-1
Aniline 62-53-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net