**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 35141-30-1 |3-[2-(2-Aminoethylamino)ethylamino]pro| 95 | 252-390-9 |
| |pyl-trimethoxysilane | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 14 34 43
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Reacts violently with water. Causes burns. May cause sensitization
by skin contact.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Do NOT induce vomiting. If conscious
and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Contact with water liberates highly flammable
gases.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Provide ventilation. Do not expose spill to water.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not get in eyes,
on skin, or on clothing. Do not breathe vapor or mist.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 35141-30-1:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear yellow
Odor: amine-like
pH: 10.4 (10 g/l@20C)
Vapor Pressure: < 0.1 hPa @ 20 deg C
Viscosity: 23 mPas@20 deg C
Boiling Point: 114-118 deg C @ 2 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Reacts.
Specific Gravity/Density: 1.031
Molecular Formula: C10H27N3O3Si
Molecular Weight: 265.43
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable. Material generates methanol on contact with water or
moisture on the skin, eyes and mucous membranes.
Conditions to Avoid:
Ignition sources, excess heat, Reacts with water to form methanol.
The heat of the reaction may ignite the vapor of the alcohol..
Incompatibilities with Other Materials:
Water, strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, silicon dioxide,
methanol.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 35141-30-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-[2-(2-Aminoethylamino)ethylamino]propyl-trimethoxysilane -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Polyamines, Liquid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: Polyamines, Liquid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: Polyamines, Liquid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 34 Causes burns.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 8 Keep container dry.
S 24/25 Avoid contact with skin and eyes.
S 30 Never add water to this product.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 35141-30-1: No information available.
Canada
CAS# 35141-30-1 is listed on Canada's DSL List.
CAS# 35141-30-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 35141-30-1 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 1/16/2002 Revision #1 Date: 7/09/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Venfloc 2000, polyaluminium chloride solution, Morton material
| 0-01-1 |
|
Venfloc 1143, polyacrylamide powder, Morton material
| 9003-05-8 |
|
Sodium Chloride, Reagent ACS (Crystals), 99+% (Titr.)
| 7647-14-5 |
|
(1S)-1-(2,5-Dimethoxy-2,5-dihydrofuran-2-yl)ethanol, 98%
| 33647-67-5 |
|
Sodiumborohydride, powder, 98+%, Morton material - 250 gm !!!Bulk
| 16940-66-2 |
|
Propyl formate, 96+%
| 110-74-7 |
|
2,6-Dichloro-5-Fluoro-3-Pyridinecarbonitrile, 95%
| 0-01-1 |
|
3-Methyl-1-Pentanol
| 589-35-5 |
|
Citric acid, trisodium salt dihydrate, 99%
| 6132-04-3 |
|
Sodium hexanitrocobaltate(III)
| 13600-98-1 |
|
(S)-(-)-Indoline-2-carboxylic acid, 98%
| 79815-20-6 |
|
Triallyl-s-triazine-2,4,6(1H,3H,5H)-trione, 98%
| 1025-15-6 |
|
Sodium Cyanide, Reagent ACS (Granular), 95+% (Titr.)
| 143-33-9 |
|
Tetramethylene-d8 sulfone, 99+ atom% D
| 0-01-1 |
|
4-Bromo-1-butene, 98+% (GC)
| 5162-44-7 |
|
2-Bromo-4,5-dimethoxybenzyl alcohol, 98%
| 54370-00-2 |
|
Bisphenol A Dimethylether, 98%
| 1568-83-8 |
|
Sodium dichromate dihydrate, 99%
| 7789-12-0 |
|
2-Bromo-5-Nitrobenzoic Acid
| 943-14-6 |
|
Sodium fluoride, p.a.
| 7681-49-4 |
|
2-Methylformanilide, 98%
| 94-69-9 |
|
Formic acid, sodium salt
| 141-53-7 |
|
Sodium hydrosulfide hydrate, flakes, 68-72%
| 7732-18-5 |
|
Benzophenone Oxime, 98%
| 574-66-3 |
|
Sodium Hydrosulfite
| 7775-14-6 |
|
(+)-cis, trans-Abscisic acid, 99%
| 21293-29-8 |
|
Sodium Hypophosphite Monohydrate, 99%
| 10039-56-2 |
|
Sodium Iodate, Reagent (Powder), 99% (Titr.)
| 7681-55-2 |
|
(S)-N-Carbobenzyloxy-4-Amino-2-Hydroxybutyric Acid, 96%
| 40371-50-4 |
|
Ipriflavone, 99%
| 35212-22-7 |
|
Methyl-6-O-(N-Heptylcarbamoyl)-alpha-D-Glucopyranoside, 99%
| 115457-83-5 |
|
Egg Yolk IgY purification kit
| 0-01-1 |
|
Sodium Iodide, U.S.P./N.F. (Granular), 99% (Titr.)
| 7681-82-5 |
|
Sodium D,L-Lactate,60 wt% Solution in Water
| 72-17-3 |
|
Ampicillin Sodium Salt
| 69-52-3 |
|
Sodium metabisulfite, reagent ACS, 97+%
| 7446-09-5 |
|
Sodium metasilicate, nonahydrate
| 6834-92-0 |
|
Sheep IgG purification kit
| 0-01-1 |
|
Sodium Methoxide, Anhydrous Powder
| 124-41-4 |
|
Methyl 2-Bromo-5-Nitrobenzoic Acid
| 6942-36-5 |
|
1,1,3,5,5-Pentaphenyl-1,3,5-Trimethyltrisiloxane
| 3390-61-2 |
|
2-Amino-2-Indanecarboxylic Acid
| 27473-62-7 |
|
Sodium Nitrite, reagent ACS (crystals), 97+% (titr.)
| 7632-00-0 |
|
Sodium orthovanadate, 99%, - 60 mesh
| 13721-39-6 |
|
3-(2-Naphthyl)-D-Alanine, 99%
| 76985-09-6 |
|
3-[2-(2-Aminoethylamino)ethylamino]propyl-trimethoxysilane, tech.
| 35141-30-1 |
|
Sodium oxalate, p.a.
| 62-76-0 |
|
Sodium periodate, reagent acs
| 7790-28-5 |
|
(-)-(1R,2S)-2-Amino-1-Cyclopentanecarboxylic Acid
| 0-01-1 |
|
Aniline
| 62-53-3 |
|
|