Search   
MSDS 
:
 Venfloc 1143, polyacrylamide powder, Morton material
CAS 
:
 9003-05-8
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9003-05-8 |Venfloc 1143, polyacrylamide powder | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes. Take precautionary measures against static discharges.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 9003-05-8:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: off-white
Odor: Not available.
pH: 3.6 (1% aq.sol.)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: Not applicable.
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9003-05-8: AS3700000
LD50/LC50:
CAS# 9003-05-8: Oral, mouse: LD50 = 12950 mg/kg; Oral, rabbit: LD50
= 11250 mg/kg; Oral, rat: LD50 = >1 gm/kg.
Carcinogenicity:
Venfloc 1143, polyacrylamide powder -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 9003-05-8: 1
Canada
CAS# 9003-05-8 is listed on Canada's DSL List.
CAS# 9003-05-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9003-05-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/11/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Venfloc 2000, polyaluminium chloride solution, Morton material 0-01-1
Venfloc 1143, polyacrylamide powder, Morton material 9003-05-8
Sodium Chloride, Reagent ACS (Crystals), 99+% (Titr.) 7647-14-5
(1S)-1-(2,5-Dimethoxy-2,5-dihydrofuran-2-yl)ethanol, 98% 33647-67-5
Sodiumborohydride, powder, 98+%, Morton material - 250 gm !!!Bulk 16940-66-2
Propyl formate, 96+% 110-74-7
2,6-Dichloro-5-Fluoro-3-Pyridinecarbonitrile, 95% 0-01-1
3-Methyl-1-Pentanol 589-35-5
Citric acid, trisodium salt dihydrate, 99% 6132-04-3
Sodium hexanitrocobaltate(III) 13600-98-1
(S)-(-)-Indoline-2-carboxylic acid, 98% 79815-20-6
Triallyl-s-triazine-2,4,6(1H,3H,5H)-trione, 98% 1025-15-6
Sodium Cyanide, Reagent ACS (Granular), 95+% (Titr.) 143-33-9
Tetramethylene-d8 sulfone, 99+ atom% D 0-01-1
4-Bromo-1-butene, 98+% (GC) 5162-44-7
2-Bromo-4,5-dimethoxybenzyl alcohol, 98% 54370-00-2
Bisphenol A Dimethylether, 98% 1568-83-8
Sodium dichromate dihydrate, 99% 7789-12-0
2-Bromo-5-Nitrobenzoic Acid 943-14-6
Sodium fluoride, p.a. 7681-49-4
2-Methylformanilide, 98% 94-69-9
Formic acid, sodium salt 141-53-7
Sodium hydrosulfide hydrate, flakes, 68-72% 7732-18-5
Benzophenone Oxime, 98% 574-66-3
Sodium Hydrosulfite 7775-14-6
(+)-cis, trans-Abscisic acid, 99% 21293-29-8
Sodium Hypophosphite Monohydrate, 99% 10039-56-2
Sodium Iodate, Reagent (Powder), 99% (Titr.) 7681-55-2
(S)-N-Carbobenzyloxy-4-Amino-2-Hydroxybutyric Acid, 96% 40371-50-4
Ipriflavone, 99% 35212-22-7
Methyl-6-O-(N-Heptylcarbamoyl)-alpha-D-Glucopyranoside, 99% 115457-83-5
Egg Yolk IgY purification kit 0-01-1
Sodium Iodide, U.S.P./N.F. (Granular), 99% (Titr.) 7681-82-5
Sodium D,L-Lactate,60 wt% Solution in Water 72-17-3
Ampicillin Sodium Salt 69-52-3
Sodium metabisulfite, reagent ACS, 97+% 7446-09-5
Sodium metasilicate, nonahydrate 6834-92-0
Sheep IgG purification kit 0-01-1
Sodium Methoxide, Anhydrous Powder 124-41-4
Methyl 2-Bromo-5-Nitrobenzoic Acid 6942-36-5
1,1,3,5,5-Pentaphenyl-1,3,5-Trimethyltrisiloxane 3390-61-2
2-Amino-2-Indanecarboxylic Acid 27473-62-7
Sodium Nitrite, reagent ACS (crystals), 97+% (titr.) 7632-00-0
Sodium orthovanadate, 99%, - 60 mesh 13721-39-6
3-(2-Naphthyl)-D-Alanine, 99% 76985-09-6
3-[2-(2-Aminoethylamino)ethylamino]propyl-trimethoxysilane, tech. 35141-30-1
Sodium oxalate, p.a. 62-76-0
Sodium periodate, reagent acs 7790-28-5
(-)-(1R,2S)-2-Amino-1-Cyclopentanecarboxylic Acid 0-01-1
Aniline 62-53-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net