Search   
MSDS 
:
 Sodium fluoride, p.a.
CAS 
:
 7681-49-4
SYNONYMS 
:
 Disodium difluoride, Alcoa sodium fluoride, Antibulit
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7681-49-4 |Sodium fluoride | | 231-667-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25 32 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed. Contact with acids liberates very toxic gas.
Irritating to eyes and skin.Moisture sensitive.

Potential Health Effects
Eye:
Causes moderate eye irritation.
Skin:
Contact with skin causes irritation and possible burns, especially
if the skin is wet or moist.
Ingestion:
May be fatal if swallowed. Poison by ingestion. May cause
respiratory failure. May cause severe gastrointestinal tract
irritation with nausea, vomiting and possible burns. May cause
circulatory system failure.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. The toxicological properties of this substance have
not been fully investigated.
Chronic:
Chronic inhalation and ingestion may cause chronic fluoride
poisoning (fluorosis) characterized by weight loss, weakness,
anemia, brittle bones, and stiff joints. May cause kidney injury.
Chronic exposure may lead to liver and lung damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Material will not burn. Wear appropriate protective clothing to
prevent contact with skin and eyes. Wear a self-contained breathing
apparatus (SCBA) to prevent contact with thermal decomposition
products. Use extinguishing media appropriate to the surrounding
fire.
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide, or regular foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Do not flush into a sewer. Avoid generating dusty
conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Do
not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin,
or on clothing. Use only in a chemical fume hood.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep away
from strong acids.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective clothing to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 1700 deg C @ 760.00mm Hg
Freezing/Melting Point: 993 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 4 G/100 ML (25C) IN WATER
Specific Gravity/Density:
Molecular Formula: NaF
Molecular Weight: 41.98

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Acids, glass.
Hazardous Decomposition Products:
Hydrogen fluoride gas.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7681-49-4: WB0350000
LD50/LC50:
CAS# 7681-49-4: Draize test, rabbit, eye: 20 mg/24H Moderate; Oral,
mouse: LD50 = 44 mg/kg; Oral, rabbit: LD50 = 200 mg/kg; Oral, rat:
LD50 = 31 mg/kg.
Carcinogenicity:
Sodium fluoride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
This chemical has a low potential to affect aquatic organisms.
Acute
aquatic effects:
96-hour LCo; waterflea:504 mg/L
24 and 96 hour
LC50; sheepshead minnow: GT 500mg/L
48-hour LC50; mosquito fish:
920 mg/L
96-hour LC50; Scenedesmus: 43 mg/l (McKee, J.E. et al Water
Quality Criteria The Resources Agency of California, state water
Quality Control Board)
48-hour : LC50 Daphnia magna : 340 mg/l (Le
Blanc, G.A. et al Bull. Environ. Contam. Toxicol. 1980)

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: SODIUM FLUORIDE
Hazard Class: 6.1
UN Number: 1690
Packing Group: III
IMO
Shipping Name: SODIUM FLUORIDE, SOLID
Hazard Class: 6.1
UN Number: 1690
Packing Group: III
RID/ADR
Shipping Name: SODIUM FLUORIDE
Hazard Class: 6.1
UN Number: 1690
Packing group: III
USA RQ:CAS# 7681-49-4: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
R 32 Contact with acids liberates very toxic gas.
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 22 Do not breathe dust.
S 36 Wear suitable protective clothing.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7681-49-4: 1
United Kingdom Occupational Exposure Limits
CAS# 7681-49-4: OES-United Kingdom, TWA (listed as ** undefined
**): 2.5 mg/m3 TWA (inorganic, as F)

United Kingdom Maximum Exposure Limits

Canada
CAS# 7681-49-4 is listed on Canada's DSL List.
CAS# 7681-49-4 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 7681-49-4: OEL-AUSTRALIA:TWA 2.5 mg(F)/m3
OEL-BELGIUM:TWA 2.5 mg(F)/m3
OEL-CZECHOSLOVAKIA:TWA 1 mg(F)/m3;STEL 5 mg(F)/m3
OEL-DENMARK:TWA 2.5 mg(F)/m3
OEL-FINLAND:TWA 2.5 mg(F)/m3
OEL-FRANCE:TWA 2 mg/m3
OEL-FRANCE:TWA 2.5 mg(F)/m3
OEL-GERMANY:TWA 2.5 mg(F)/m3
OEL-HUNGARY:TWA 1 mg(F)/m3;STEL 2 mg(F)/m3
OEL-THE NETHERLANDS:TWA 2.5 mg(F)/m3
OEL-THE PHILIPPINES:TWA 2.5 mg(F)/m3
OEL-POLAND:TWA 1 mg(F)/m3
OEL-RUSSIA:TWA 0.2 mg/m3;STEL 1 mg/m3
OEL-SWEDEN:TWA 2 mg(F)/m3
OEL-SWITZERLAND:TWA 1.8 ppm (1.5 mg(F)/m3);STEL 9.0 ppm
OEL-THAILAND:TWA 2.5 mg(F)/m3
OEL-TURKEY:TWA 2.5 mg(F)/m3
OEL-UNITED KINGDOM:TWA 2.5 mg(F)/m3
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 7681-49-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/07/1999 Revision #3 Date: 10/08/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Venfloc 2000, polyaluminium chloride solution, Morton material 0-01-1
Venfloc 1143, polyacrylamide powder, Morton material 9003-05-8
Sodium Chloride, Reagent ACS (Crystals), 99+% (Titr.) 7647-14-5
(1S)-1-(2,5-Dimethoxy-2,5-dihydrofuran-2-yl)ethanol, 98% 33647-67-5
Sodiumborohydride, powder, 98+%, Morton material - 250 gm !!!Bulk 16940-66-2
Propyl formate, 96+% 110-74-7
2,6-Dichloro-5-Fluoro-3-Pyridinecarbonitrile, 95% 0-01-1
3-Methyl-1-Pentanol 589-35-5
Citric acid, trisodium salt dihydrate, 99% 6132-04-3
Sodium hexanitrocobaltate(III) 13600-98-1
(S)-(-)-Indoline-2-carboxylic acid, 98% 79815-20-6
Triallyl-s-triazine-2,4,6(1H,3H,5H)-trione, 98% 1025-15-6
Sodium Cyanide, Reagent ACS (Granular), 95+% (Titr.) 143-33-9
Tetramethylene-d8 sulfone, 99+ atom% D 0-01-1
4-Bromo-1-butene, 98+% (GC) 5162-44-7
2-Bromo-4,5-dimethoxybenzyl alcohol, 98% 54370-00-2
Bisphenol A Dimethylether, 98% 1568-83-8
Sodium dichromate dihydrate, 99% 7789-12-0
2-Bromo-5-Nitrobenzoic Acid 943-14-6
Sodium fluoride, p.a. 7681-49-4
2-Methylformanilide, 98% 94-69-9
Formic acid, sodium salt 141-53-7
Sodium hydrosulfide hydrate, flakes, 68-72% 7732-18-5
Benzophenone Oxime, 98% 574-66-3
Sodium Hydrosulfite 7775-14-6
(+)-cis, trans-Abscisic acid, 99% 21293-29-8
Sodium Hypophosphite Monohydrate, 99% 10039-56-2
Sodium Iodate, Reagent (Powder), 99% (Titr.) 7681-55-2
(S)-N-Carbobenzyloxy-4-Amino-2-Hydroxybutyric Acid, 96% 40371-50-4
Ipriflavone, 99% 35212-22-7
Methyl-6-O-(N-Heptylcarbamoyl)-alpha-D-Glucopyranoside, 99% 115457-83-5
Egg Yolk IgY purification kit 0-01-1
Sodium Iodide, U.S.P./N.F. (Granular), 99% (Titr.) 7681-82-5
Sodium D,L-Lactate,60 wt% Solution in Water 72-17-3
Ampicillin Sodium Salt 69-52-3
Sodium metabisulfite, reagent ACS, 97+% 7446-09-5
Sodium metasilicate, nonahydrate 6834-92-0
Sheep IgG purification kit 0-01-1
Sodium Methoxide, Anhydrous Powder 124-41-4
Methyl 2-Bromo-5-Nitrobenzoic Acid 6942-36-5
1,1,3,5,5-Pentaphenyl-1,3,5-Trimethyltrisiloxane 3390-61-2
2-Amino-2-Indanecarboxylic Acid 27473-62-7
Sodium Nitrite, reagent ACS (crystals), 97+% (titr.) 7632-00-0
Sodium orthovanadate, 99%, - 60 mesh 13721-39-6
3-(2-Naphthyl)-D-Alanine, 99% 76985-09-6
3-[2-(2-Aminoethylamino)ethylamino]propyl-trimethoxysilane, tech. 35141-30-1
Sodium oxalate, p.a. 62-76-0
Sodium periodate, reagent acs 7790-28-5
(-)-(1R,2S)-2-Amino-1-Cyclopentanecarboxylic Acid 0-01-1
Aniline 62-53-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net