Search   
MSDS 
:
 Triphenyl phosphite, 99+%
CAS 
:
 101-02-0
SYNONYMS 
:
 Phosphorous acid, triphenyl ester
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 101-02-0 |Triphenyl phosphite | 97.0 | 202-908-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.Moisture sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
May inhibit cholinesterase activity, thereby producing nervous system
effects.
Inhalation:
Low hazard for usual industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Discard contaminated clothing in a manner which limits further
exposure.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not get in eyes,
on skin, or on clothing. Keep container tightly closed. Do not ingest
or inhale.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 101-02-0:

Russia: 0.1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: after melting, clear colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 5 mmHg @ 205 C
Viscosity: Not available.
Boiling Point: 360 deg C
Freezing/Melting Point: 25 deg C
Autoignition Temperature: Not available.
Flash Point: 218 deg C ( 424.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >360 C
Solubility in water: insoluble (slowly hydrolysed)
Specific Gravity/Density: 1.18
Molecular Formula: C18H15O3P
Molecular Weight: 310.077

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of phosphorus, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 101-02-0: TH1575000
LD50/LC50:
CAS# 101-02-0: Draize test, rabbit, eye: 500 mg/24H Mild; Draize
test, rabbit, skin: 500 mg Severe; Draize test, rabbit, skin: 20
mg/24H Moderate; Oral, mouse: LD50 = 1080 mg/kg; Oral, rat: LD50 =
444 mg/kg.
Carcinogenicity:
Triphenyl phosphite -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 28 After contact with skin, wash immediately
with...
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 101-02-0: 1
Canada
CAS# 101-02-0 is listed on Canada's DSL List.
CAS# 101-02-0 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 101-02-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/12/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium Chlorate 7775-09-9
Sodium chloride 7647-14-5
Glycyl-L-glutamine monohydrate, 99% 13115-71-4
2-Bromoethyl Ethyl Ether, Tech., 94% (GC) 592-55-2
Sodium chromate, anhydrous 7775-11-3
(R,S)-2-Amino-3-hydroxy-3-methylbutanoic acid, 99+% 2280-28-6
Sodium Citrate Dihydrate 6132-04-3
Sodium Cobaltinitrite 13600-98-1
Triphenyl phosphite, 99+% 101-02-0
4-Butylphenol, 99% (gc) 1638-22-8
2,2,2-Triphenylacetophenone, 99+%(TLC) 466-37-5
Sodium Cyanide 143-33-9
Sodium Chloranilate Trihydrate, 95% (UV-Vis) 36275-66-8
2,3,4,5-Tetrachloronitrobenzene, 99% 879-39-0
Dimethyl Malonate, 99+% 108-59-8
2-(Methacryloyloxy)ethyltrimethylammonium methyl sulfate, 80% in 6891-44-7
Sodium dichromate dihydrate 7789-12-0
2-Phenyl-1-propanol, 97% 1123-85-9
N-Carbobenzyloxy-L-Serine, 99+% 1145-80-8
Sodium fluoride 7681-49-4
Triphenylantimony, 97% 603-36-1
Sodium Formate 141-53-7
Sodium Metaphosphate 10124-56-8
trans-2-Pentenoic acid, 97% 13991-37-2
3-Acetylindole, 97% 703-80-0
Sodium hydroxide, solid 497-19-8
3,5-Dimethyl-2-cyclohexen-1-one, 99% 1123-09-7
Sodium hypophosphite monohydrate 7681-53-0
Sodium iodate 7681-55-2
Sodium Iodide, Anhydrous, 99+% 7681-82-5
1,1'-(4-Chlorobutylidene)bis-(4-fluorobenzene) tech. 90+% 3312-04-7
Sodium Lactate 72-17-3
Sodium arsenite, powder, certified 7784-46-5
Sodium metabisulfite 7446-09-5
2,6-Dichloropyrazine, 99+% 4774-14-5
Sodium meta-Silicate Nonahydrate 6834-92-0
Sodium meta-Silicate Pentahydrate 6834-92-0
Sodium Methoxide 124-41-4
Sodium Nitrate 7631-99-4
Octanoic Acid, 99.5+% 124-07-2
Sodium nitrite 7632-00-0
4-Hydroxy-2-mercapto-6-propylpyrimidine, 98% 51-52-5
1-Phenyl-1-cyclopropanecarboxylic acid, 97% 6120-95-2
4,4'-Dimethoxybenzhydrol, 98+% 728-87-0
1,1-Dimethylpropargylamine, 90% ( remainder water) 2978-58-7
Diethyldithiocarbamic Acid, Sodium Salt Trihydrate, Reagent ACS
Vinyltriphenylphosphonium bromide, 97% 5044-52-0
Mucic Acid, 98% 526-99-8
Sodium oxalate 62-76-0
2-Hydroxyethylhydrazine, 90% 109-84-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net