Search   
MSDS 
:
 Sodium meta-Silicate Nonahydrate
CAS 
:
 6834-92-0
SYNONYMS 
:
 Disodium metasilicate nonahydrate; Disodium trioxosilicate     nonahydrate; Sodium metasilicate nonahydrate; Sodium silicate     nonahydrate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6834-92-0 |Sodium metasilicate anhydrous | - | 229-912-9 |
|----------------|--------------------------------------|----------|-----------|
| 13517-24-3 |Sodium metasilicate nonahydrate | 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34 37

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns. Irritating to respiratory system.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause severe gastrointestinal tract
irritation with nausea, vomiting and possible burns. May cause
perforation of the digestive tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects. Contains crystalline
silica which may lead to respiratory abnormalities and silicosis.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those
of acute inhalation and ingestion. Effects may be delayed. Chronic
inhalation may cause lung damage, bronchitis, and silicosis. May
decrease blood clotting. Prolonged exposure to respirable crystalline
quartz may cause delayed lung injury/fibrosis (silicosis).

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
Get medical aid immediately. In case of contact, immediately wipe
away excess material with a dry cloth while removing contaminated
clothing and shoes. Under safety shower, wash affected areas
thoroughly with large amounts of water, and soap if available, for at
least 15 minutes. Discard or decontaminate clothing and shoes.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use
extinguishing media appropriate to the surrounding fire. Substance is
noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Keep container
tightly closed. Do not get on skin or in eyes. Do not ingest or
inhale. Use with adequate ventilation. Discard contaminated shoes.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR ??1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Appearance: colorless or white
Odor: none reported
pH: 13 @1% solution
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 104-118 F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Very soluble in water
Specific Gravity/Density: 1.646
Molecular Formula: Na2SiO3.9H2O
Molecular Weight: 284.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Acids.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, silicon oxide, sodium oxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6834-92-0: VV9275000
CAS# 13517-24-3 unlisted.
LD50/LC50:
CAS# 6834-92-0: Draize test, rabbit, skin: 250 mg/24H Severe; Oral,
mouse: LD50 = 770 mg/kg; Oral, rat: LD50 = 1153 mg/kg.
CAS# 13517-24-3.
Carcinogenicity:
Sodium metasilicate anhydrous -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Sodium metasilicate nonahydrate -
IARC: Group 3 carcinogen (listed as ** undefined **).
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: DISODIUM TRIOXOSILICATE
Hazard Class: 8
UN Number: 3253
Packing Group: III
IMO
Shipping Name: DISODIUM TRIOXOSILICATE
Hazard Class: 8
UN Number: 3253
Packing Group: III
RID/ADR
Shipping Name: DISODIUM TRIOXOSILICATE
Dangerous Goods Code: 8
UN Number: 3253

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
R 37 Irritating to respiratory system.
Safety Phrases:
S 13 Keep away from food, drink and animal feeding
stuffs.
S 24/25 Avoid contact with skin and eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 6834-92-0: 1
CAS# 13517-24-3: 1
United Kingdom Occupational Exposure Limits
CAS# 13517-24-3: OES-United Kingdom, TWA (listed as ** undefined
**): total inhalable dust: 6 mg/m3 TWA; respirable dust: 2.4 mg/m3
TWA

Canada
CAS# 6834-92-0 is listed on Canada's DSL List.
CAS# 6834-92-0 is listed on Canada's Ingredient Disclosure List.
CAS# 13517-24-3 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 13517-24-3: Not available.
US FEDERAL
TSCA
CAS# 6834-92-0 is listed on the TSCA inventory.
CAS# 13517-24-3 is not on the TSCA Inventory. It is a hydrate and
exempt from TSCA Inventory requirements (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 10/22/2001

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium Chlorate 7775-09-9
Sodium chloride 7647-14-5
Glycyl-L-glutamine monohydrate, 99% 13115-71-4
2-Bromoethyl Ethyl Ether, Tech., 94% (GC) 592-55-2
Sodium chromate, anhydrous 7775-11-3
(R,S)-2-Amino-3-hydroxy-3-methylbutanoic acid, 99+% 2280-28-6
Sodium Citrate Dihydrate 6132-04-3
Sodium Cobaltinitrite 13600-98-1
Triphenyl phosphite, 99+% 101-02-0
4-Butylphenol, 99% (gc) 1638-22-8
2,2,2-Triphenylacetophenone, 99+%(TLC) 466-37-5
Sodium Cyanide 143-33-9
Sodium Chloranilate Trihydrate, 95% (UV-Vis) 36275-66-8
2,3,4,5-Tetrachloronitrobenzene, 99% 879-39-0
Dimethyl Malonate, 99+% 108-59-8
2-(Methacryloyloxy)ethyltrimethylammonium methyl sulfate, 80% in 6891-44-7
Sodium dichromate dihydrate 7789-12-0
2-Phenyl-1-propanol, 97% 1123-85-9
N-Carbobenzyloxy-L-Serine, 99+% 1145-80-8
Sodium fluoride 7681-49-4
Triphenylantimony, 97% 603-36-1
Sodium Formate 141-53-7
Sodium Metaphosphate 10124-56-8
trans-2-Pentenoic acid, 97% 13991-37-2
3-Acetylindole, 97% 703-80-0
Sodium hydroxide, solid 497-19-8
3,5-Dimethyl-2-cyclohexen-1-one, 99% 1123-09-7
Sodium hypophosphite monohydrate 7681-53-0
Sodium iodate 7681-55-2
Sodium Iodide, Anhydrous, 99+% 7681-82-5
1,1'-(4-Chlorobutylidene)bis-(4-fluorobenzene) tech. 90+% 3312-04-7
Sodium Lactate 72-17-3
Sodium arsenite, powder, certified 7784-46-5
Sodium metabisulfite 7446-09-5
2,6-Dichloropyrazine, 99+% 4774-14-5
Sodium meta-Silicate Nonahydrate 6834-92-0
Sodium meta-Silicate Pentahydrate 6834-92-0
Sodium Methoxide 124-41-4
Sodium Nitrate 7631-99-4
Octanoic Acid, 99.5+% 124-07-2
Sodium nitrite 7632-00-0
4-Hydroxy-2-mercapto-6-propylpyrimidine, 98% 51-52-5
1-Phenyl-1-cyclopropanecarboxylic acid, 97% 6120-95-2
4,4'-Dimethoxybenzhydrol, 98+% 728-87-0
1,1-Dimethylpropargylamine, 90% ( remainder water) 2978-58-7
Diethyldithiocarbamic Acid, Sodium Salt Trihydrate, Reagent ACS
Vinyltriphenylphosphonium bromide, 97% 5044-52-0
Mucic Acid, 98% 526-99-8
Sodium oxalate 62-76-0
2-Hydroxyethylhydrazine, 90% 109-84-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net