**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 603-36-1 |Triphenylantimony | 97 | 210-037-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/22
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful by inhalation and if swallowed.The toxicological properties
of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
None
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 603-36-1:
United Kingdom, WEL - TWA: (listed as antimony): 0.5 mg/m3 TWA
United Kingdom, WEL - STEL: (listed as antimony): 1.5 mg/m3 STEL
United States OSHA: 0.5 mg/m3 TWA (listed under Antimony).
Belgium - TWA: (listed as antimony): 0.5 mg/m3 VLE
France - VME: (listed as antimony): 0.5 mg/m3 VME
Germany: (listed as antimony): 0.5 mg/m3 VME
Japan: (listed as antimony): 0.1 mg/m3 OEL
Malaysia: (listed as antimony): 0.5 mg/m3 TWA
Netherlands: (listed as antimony): 0.5 mg/m3 MAC
Russia: (listed as antimony): 0.5 mg/m3 TWA
Russia: (listed as antimony): 0.2 mg/m3 STEL
Spain: (listed as antimony): 0.5 mg/m3 VLA-ED
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: very light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 377 deg C @ 760.00mm Hg
Freezing/Melting Point: 53-57C
Autoignition Temperature: Not available.
Flash Point: 109 deg C ( 228.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 360 deg C
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C18H15Sb
Molecular Weight: 353.07
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, antimony/antimony oxides.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 603-36-1: WJ1400000
LD50/LC50:
CAS# 603-36-1: Oral, mouse: LD50 = 650 mg/kg; Oral, rat: LD50 = 183
mg/kg.
Carcinogenicity:
Triphenylantimony -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/22 Harmful by inhalation and if swallowed.
Safety Phrases:
S 22 Do not breathe dust.
WGK (Water Danger/Protection)
CAS# 603-36-1: No information available.
Canada
CAS# 603-36-1 is listed on Canada's NDSL List.
CAS# 603-36-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 603-36-1 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #3 Date: 12/04/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Sodium Chlorate
| 7775-09-9 |
|
Sodium chloride
| 7647-14-5 |
|
Glycyl-L-glutamine monohydrate, 99%
| 13115-71-4 |
|
2-Bromoethyl Ethyl Ether, Tech., 94% (GC)
| 592-55-2 |
|
Sodium chromate, anhydrous
| 7775-11-3 |
|
(R,S)-2-Amino-3-hydroxy-3-methylbutanoic acid, 99+%
| 2280-28-6 |
|
Sodium Citrate Dihydrate
| 6132-04-3 |
|
Sodium Cobaltinitrite
| 13600-98-1 |
|
Triphenyl phosphite, 99+%
| 101-02-0 |
|
4-Butylphenol, 99% (gc)
| 1638-22-8 |
|
2,2,2-Triphenylacetophenone, 99+%(TLC)
| 466-37-5 |
|
Sodium Cyanide
| 143-33-9 |
|
Sodium Chloranilate Trihydrate, 95% (UV-Vis)
| 36275-66-8 |
|
2,3,4,5-Tetrachloronitrobenzene, 99%
| 879-39-0 |
|
Dimethyl Malonate, 99+%
| 108-59-8 |
|
2-(Methacryloyloxy)ethyltrimethylammonium methyl sulfate, 80% in
| 6891-44-7 |
|
Sodium dichromate dihydrate
| 7789-12-0 |
|
2-Phenyl-1-propanol, 97%
| 1123-85-9 |
|
N-Carbobenzyloxy-L-Serine, 99+%
| 1145-80-8 |
|
Sodium fluoride
| 7681-49-4 |
|
Triphenylantimony, 97%
| 603-36-1 |
|
Sodium Formate
| 141-53-7 |
|
Sodium Metaphosphate
| 10124-56-8 |
|
trans-2-Pentenoic acid, 97%
| 13991-37-2 |
|
3-Acetylindole, 97%
| 703-80-0 |
|
Sodium hydroxide, solid
| 497-19-8 |
|
3,5-Dimethyl-2-cyclohexen-1-one, 99%
| 1123-09-7 |
|
Sodium hypophosphite monohydrate
| 7681-53-0 |
|
Sodium iodate
| 7681-55-2 |
|
Sodium Iodide, Anhydrous, 99+%
| 7681-82-5 |
|
1,1'-(4-Chlorobutylidene)bis-(4-fluorobenzene) tech. 90+%
| 3312-04-7 |
|
Sodium Lactate
| 72-17-3 |
|
Sodium arsenite, powder, certified
| 7784-46-5 |
|
Sodium metabisulfite
| 7446-09-5 |
|
2,6-Dichloropyrazine, 99+%
| 4774-14-5 |
|
Sodium meta-Silicate Nonahydrate
| 6834-92-0 |
|
Sodium meta-Silicate Pentahydrate
| 6834-92-0 |
|
Sodium Methoxide
| 124-41-4 |
|
Sodium Nitrate
| 7631-99-4 |
|
Octanoic Acid, 99.5+%
| 124-07-2 |
|
Sodium nitrite
| 7632-00-0 |
|
4-Hydroxy-2-mercapto-6-propylpyrimidine, 98%
| 51-52-5 |
|
1-Phenyl-1-cyclopropanecarboxylic acid, 97%
| 6120-95-2 |
|
4,4'-Dimethoxybenzhydrol, 98+%
| 728-87-0 |
|
1,1-Dimethylpropargylamine, 90% ( remainder water)
| 2978-58-7 |
|
Diethyldithiocarbamic Acid, Sodium Salt Trihydrate, Reagent ACS
| |
|
Vinyltriphenylphosphonium bromide, 97%
| 5044-52-0 |
|
Mucic Acid, 98%
| 526-99-8 |
|
Sodium oxalate
| 62-76-0 |
|
2-Hydroxyethylhydrazine, 90%
| 109-84-2 |
|
|