Search   
MSDS 
:
 3-Acetylindole, 97%
CAS 
:
 703-80-0
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 703-80-0 |3-Acetylindole | 97 % | 211-875-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 703-80-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: @ 760.00mm Hg
Freezing/Melting Point: 188.00 - 192.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 159.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidants.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 703-80-0: OB4520000
LD50/LC50:
Not available.
Carcinogenicity:
3-Acetylindole -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 703-80-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 703-80-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 703-80-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium Chlorate 7775-09-9
Sodium chloride 7647-14-5
Glycyl-L-glutamine monohydrate, 99% 13115-71-4
2-Bromoethyl Ethyl Ether, Tech., 94% (GC) 592-55-2
Sodium chromate, anhydrous 7775-11-3
(R,S)-2-Amino-3-hydroxy-3-methylbutanoic acid, 99+% 2280-28-6
Sodium Citrate Dihydrate 6132-04-3
Sodium Cobaltinitrite 13600-98-1
Triphenyl phosphite, 99+% 101-02-0
4-Butylphenol, 99% (gc) 1638-22-8
2,2,2-Triphenylacetophenone, 99+%(TLC) 466-37-5
Sodium Cyanide 143-33-9
Sodium Chloranilate Trihydrate, 95% (UV-Vis) 36275-66-8
2,3,4,5-Tetrachloronitrobenzene, 99% 879-39-0
Dimethyl Malonate, 99+% 108-59-8
2-(Methacryloyloxy)ethyltrimethylammonium methyl sulfate, 80% in 6891-44-7
Sodium dichromate dihydrate 7789-12-0
2-Phenyl-1-propanol, 97% 1123-85-9
N-Carbobenzyloxy-L-Serine, 99+% 1145-80-8
Sodium fluoride 7681-49-4
Triphenylantimony, 97% 603-36-1
Sodium Formate 141-53-7
Sodium Metaphosphate 10124-56-8
trans-2-Pentenoic acid, 97% 13991-37-2
3-Acetylindole, 97% 703-80-0
Sodium hydroxide, solid 497-19-8
3,5-Dimethyl-2-cyclohexen-1-one, 99% 1123-09-7
Sodium hypophosphite monohydrate 7681-53-0
Sodium iodate 7681-55-2
Sodium Iodide, Anhydrous, 99+% 7681-82-5
1,1'-(4-Chlorobutylidene)bis-(4-fluorobenzene) tech. 90+% 3312-04-7
Sodium Lactate 72-17-3
Sodium arsenite, powder, certified 7784-46-5
Sodium metabisulfite 7446-09-5
2,6-Dichloropyrazine, 99+% 4774-14-5
Sodium meta-Silicate Nonahydrate 6834-92-0
Sodium meta-Silicate Pentahydrate 6834-92-0
Sodium Methoxide 124-41-4
Sodium Nitrate 7631-99-4
Octanoic Acid, 99.5+% 124-07-2
Sodium nitrite 7632-00-0
4-Hydroxy-2-mercapto-6-propylpyrimidine, 98% 51-52-5
1-Phenyl-1-cyclopropanecarboxylic acid, 97% 6120-95-2
4,4'-Dimethoxybenzhydrol, 98+% 728-87-0
1,1-Dimethylpropargylamine, 90% ( remainder water) 2978-58-7
Diethyldithiocarbamic Acid, Sodium Salt Trihydrate, Reagent ACS
Vinyltriphenylphosphonium bromide, 97% 5044-52-0
Mucic Acid, 98% 526-99-8
Sodium oxalate 62-76-0
2-Hydroxyethylhydrazine, 90% 109-84-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net