Search   
MSDS 
:
 4-Butylphenol, 99% (gc)
CAS 
:
 1638-22-8
SYNONYMS 
:
 Phenol, p-butyl-; p-Butylphenol; p-Hydroxybutylbenzene;     4-Butylphenol; 4-n-Butylphenol; p-n-Butylphenol;     1-Hydroxy-4-n-butylbenzene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1638-22-8 |p-Butylphenol | 99.0 | 216-672-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 34 36/37/38 42/43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns. Irritating to eyes, respiratory system and skin. May
cause sensitization by inhalation and skin contact.Corrosive.

Potential Health Effects
Eye:
Causes eye irritation. Causes eye burns. May cause chemical
conjunctivitis and corneal damage. May cause chemical
conjunctivitis.
Skin:
Causes skin irritation. Causes skin burns. May cause skin rash (in
milder cases), and cold and clammy skin with cyanosis or pale color.
May cause sensitization by skin contact.
Ingestion:
May cause severe and permanent damage to the digestive tract. May
cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Causes gastrointestinal tract burns. May cause perforation
of the digestive tract. May cause systemic effects.
Inhalation:
Causes respiratory tract irritation. Causes chemical burns to the
respiratory tract. Aspiration may lead to pulmonary edema. May cause
systemic effects. May cause respiratory sensitization.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately. Do NOT induce
vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls
of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. Do NOT use mouth-to-mouth resuscitation. If
breathing has ceased apply artificial respiration using oxygen and a
suitable mechanical device such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Use with adequate
ventilation. Wash clothing before reuse. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 1638-22-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 270 deg C @ 760.00mm Hg
Freezing/Melting Point: 22 deg C
Autoignition Temperature: Not available.
Flash Point: 121 deg C ( 249.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: C10H14O
Molecular Weight: 150.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
None reported.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1638-22-8: SJ8922500
LD50/LC50:
Not available.
Carcinogenicity:
p-Butylphenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ALKYLPHENOLS, LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3145
Packing Group: III
IMO
Shipping Name: ALKYLPHENOLS, LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3145
Packing Group: III
RID/ADR
Shipping Name: ALKYLPHENOLS, LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3145
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 34 Causes burns.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 42/43 May cause sensitization by inhalation and
skin contact.
Safety Phrases:
S 22 Do not breathe dust.
S 24 Avoid contact with skin.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 1638-22-8: No information available.
Canada
CAS# 1638-22-8 is listed on Canada's DSL List.
CAS# 1638-22-8 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1638-22-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/05/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium Chlorate 7775-09-9
Sodium chloride 7647-14-5
Glycyl-L-glutamine monohydrate, 99% 13115-71-4
2-Bromoethyl Ethyl Ether, Tech., 94% (GC) 592-55-2
Sodium chromate, anhydrous 7775-11-3
(R,S)-2-Amino-3-hydroxy-3-methylbutanoic acid, 99+% 2280-28-6
Sodium Citrate Dihydrate 6132-04-3
Sodium Cobaltinitrite 13600-98-1
Triphenyl phosphite, 99+% 101-02-0
4-Butylphenol, 99% (gc) 1638-22-8
2,2,2-Triphenylacetophenone, 99+%(TLC) 466-37-5
Sodium Cyanide 143-33-9
Sodium Chloranilate Trihydrate, 95% (UV-Vis) 36275-66-8
2,3,4,5-Tetrachloronitrobenzene, 99% 879-39-0
Dimethyl Malonate, 99+% 108-59-8
2-(Methacryloyloxy)ethyltrimethylammonium methyl sulfate, 80% in 6891-44-7
Sodium dichromate dihydrate 7789-12-0
2-Phenyl-1-propanol, 97% 1123-85-9
N-Carbobenzyloxy-L-Serine, 99+% 1145-80-8
Sodium fluoride 7681-49-4
Triphenylantimony, 97% 603-36-1
Sodium Formate 141-53-7
Sodium Metaphosphate 10124-56-8
trans-2-Pentenoic acid, 97% 13991-37-2
3-Acetylindole, 97% 703-80-0
Sodium hydroxide, solid 497-19-8
3,5-Dimethyl-2-cyclohexen-1-one, 99% 1123-09-7
Sodium hypophosphite monohydrate 7681-53-0
Sodium iodate 7681-55-2
Sodium Iodide, Anhydrous, 99+% 7681-82-5
1,1'-(4-Chlorobutylidene)bis-(4-fluorobenzene) tech. 90+% 3312-04-7
Sodium Lactate 72-17-3
Sodium arsenite, powder, certified 7784-46-5
Sodium metabisulfite 7446-09-5
2,6-Dichloropyrazine, 99+% 4774-14-5
Sodium meta-Silicate Nonahydrate 6834-92-0
Sodium meta-Silicate Pentahydrate 6834-92-0
Sodium Methoxide 124-41-4
Sodium Nitrate 7631-99-4
Octanoic Acid, 99.5+% 124-07-2
Sodium nitrite 7632-00-0
4-Hydroxy-2-mercapto-6-propylpyrimidine, 98% 51-52-5
1-Phenyl-1-cyclopropanecarboxylic acid, 97% 6120-95-2
4,4'-Dimethoxybenzhydrol, 98+% 728-87-0
1,1-Dimethylpropargylamine, 90% ( remainder water) 2978-58-7
Diethyldithiocarbamic Acid, Sodium Salt Trihydrate, Reagent ACS
Vinyltriphenylphosphonium bromide, 97% 5044-52-0
Mucic Acid, 98% 526-99-8
Sodium oxalate 62-76-0
2-Hydroxyethylhydrazine, 90% 109-84-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net