**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| | | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed. May cause fainting, cyanosis
(bluish discoloration of skin due to deficient oxygenation of the
blood), hypotension, arrhythmias, and seizures.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Dithiocarbamate compounds may cause cancer.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Do not allow contact with water. Keep from contact with
moist air and steam.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# :
United Kingdom, OES - TWA: (listed as tellurium): 0.1 mg/m3 TWA
United States OSHA: 0.1 mg/m3 TWA (listed under Tellurium).
Belgium - TWA: (listed as tellurium): 0.1 mg/m3 VLE
France - VME: (listed as tellurium): 0.1 mg/m3 VME
Germany: (listed as tellurium): 0.1 mg/m3 VME
Malaysia: (listed as tellurium): 0.1 mg/m3 TWA
Netherlands: (listed as tellurium): 0.1 mg/m3 MAC
Russia: (listed as tellurium): 0.01 mg/m3 TWA
Spain: (listed as tellurium): 0.1 mg/m3 VLA-ED
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 95.00 - 98.50 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: insoluble in ether, benzene
Specific Gravity/Density:
Molecular Formula: C5H10NNaS2.3H2O
Molecular Weight: 225.31
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat,
oxidizers.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
-
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# : No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# is a hydrate and is therefore exempt from TSCA status (40CFR720.
CAS# is a hydrate and is therefore exempt from TSCA status (40CFR720.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 10/15/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Sodium Chlorate
| 7775-09-9 |
|
Sodium chloride
| 7647-14-5 |
|
Glycyl-L-glutamine monohydrate, 99%
| 13115-71-4 |
|
2-Bromoethyl Ethyl Ether, Tech., 94% (GC)
| 592-55-2 |
|
Sodium chromate, anhydrous
| 7775-11-3 |
|
(R,S)-2-Amino-3-hydroxy-3-methylbutanoic acid, 99+%
| 2280-28-6 |
|
Sodium Citrate Dihydrate
| 6132-04-3 |
|
Sodium Cobaltinitrite
| 13600-98-1 |
|
Triphenyl phosphite, 99+%
| 101-02-0 |
|
4-Butylphenol, 99% (gc)
| 1638-22-8 |
|
2,2,2-Triphenylacetophenone, 99+%(TLC)
| 466-37-5 |
|
Sodium Cyanide
| 143-33-9 |
|
Sodium Chloranilate Trihydrate, 95% (UV-Vis)
| 36275-66-8 |
|
2,3,4,5-Tetrachloronitrobenzene, 99%
| 879-39-0 |
|
Dimethyl Malonate, 99+%
| 108-59-8 |
|
2-(Methacryloyloxy)ethyltrimethylammonium methyl sulfate, 80% in
| 6891-44-7 |
|
Sodium dichromate dihydrate
| 7789-12-0 |
|
2-Phenyl-1-propanol, 97%
| 1123-85-9 |
|
N-Carbobenzyloxy-L-Serine, 99+%
| 1145-80-8 |
|
Sodium fluoride
| 7681-49-4 |
|
Triphenylantimony, 97%
| 603-36-1 |
|
Sodium Formate
| 141-53-7 |
|
Sodium Metaphosphate
| 10124-56-8 |
|
trans-2-Pentenoic acid, 97%
| 13991-37-2 |
|
3-Acetylindole, 97%
| 703-80-0 |
|
Sodium hydroxide, solid
| 497-19-8 |
|
3,5-Dimethyl-2-cyclohexen-1-one, 99%
| 1123-09-7 |
|
Sodium hypophosphite monohydrate
| 7681-53-0 |
|
Sodium iodate
| 7681-55-2 |
|
Sodium Iodide, Anhydrous, 99+%
| 7681-82-5 |
|
1,1'-(4-Chlorobutylidene)bis-(4-fluorobenzene) tech. 90+%
| 3312-04-7 |
|
Sodium Lactate
| 72-17-3 |
|
Sodium arsenite, powder, certified
| 7784-46-5 |
|
Sodium metabisulfite
| 7446-09-5 |
|
2,6-Dichloropyrazine, 99+%
| 4774-14-5 |
|
Sodium meta-Silicate Nonahydrate
| 6834-92-0 |
|
Sodium meta-Silicate Pentahydrate
| 6834-92-0 |
|
Sodium Methoxide
| 124-41-4 |
|
Sodium Nitrate
| 7631-99-4 |
|
Octanoic Acid, 99.5+%
| 124-07-2 |
|
Sodium nitrite
| 7632-00-0 |
|
4-Hydroxy-2-mercapto-6-propylpyrimidine, 98%
| 51-52-5 |
|
1-Phenyl-1-cyclopropanecarboxylic acid, 97%
| 6120-95-2 |
|
4,4'-Dimethoxybenzhydrol, 98+%
| 728-87-0 |
|
1,1-Dimethylpropargylamine, 90% ( remainder water)
| 2978-58-7 |
|
Diethyldithiocarbamic Acid, Sodium Salt Trihydrate, Reagent ACS
| |
|
Vinyltriphenylphosphonium bromide, 97%
| 5044-52-0 |
|
Mucic Acid, 98%
| 526-99-8 |
|
Sodium oxalate
| 62-76-0 |
|
2-Hydroxyethylhydrazine, 90%
| 109-84-2 |
|
|