Search   
MSDS 
:
 Thiocarbanilide, 98%
CAS 
:
 102-08-9
SYNONYMS 
:
 sym-Diphenylthiourea
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 102-08-9 |Thiocarbanilide | 98.0 | 203-004-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed.The toxicological properties of this material
have not been fully investigated.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
May cause skin irritation.
Ingestion:
May be fatal if swallowed.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Inhalation of dust may cause respiratory tract
irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Do not ingest or inhale.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits. Use adequate ventilation to keep airborne
concentrations low.
Exposure Limits
CAS# 102-08-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 152.00 - 155.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: practically insoluble
Specific Gravity/Density:
Molecular Formula: C13H12N2S
Molecular Weight: 228.31

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide,
nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 102-08-9: FE1225000
LD50/LC50:
CAS# 102-08-9: Oral, rat: LD50 = 50 mg/kg.
Carcinogenicity:
Thiocarbanilide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 46 If swallowed, seek medical advice immediately
and show this container or label.
WGK (Water Danger/Protection)
CAS# 102-08-9: No information available.
Canada
CAS# 102-08-9 is listed on Canada's DSL List.
CAS# 102-08-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 102-08-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/06/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Vinyl Acetate 108-05-4
Dichlorophenylphosphine, 97% 644-97-3
5-Nitro-2-N-(Propylamino)Pyridine 25948-11-2
Ethyl cellulose, Ethoxyl Content 48%, 4 CPS 9004-57-3
Crotyl alcohol, 90% (gc) 6117-91-5
Lead(ii) methanethiolate, 99% (titr.) 35029-96-0
3-exo-Hydroxymethylbicyclo[2.2.1]heptyl-2-exo-amine hydrochloride,
4,4'-Sulfonyldiphenol, 99.7% (HPLC) 80-09-1
(Diphenylthiocarbazono)phenylmercury 56724-82-4
3-Iodotoluene, 99% 625-95-6
1(2-Methoxyphenyl)piperazine hydrochloride, 99%(tlc) 5464-78-8
3,3-Dimethyl-1-Butene, 95% 558-37-2
Benzyltriethylammonium chloride, 98% 56-37-1
1-Cyclohexene-1-carboxylic acid, 96% (GC) 636-82-8
4-Bromo-2-Fluorobenzonitrile, 99+% 105942-08-3
Eicosanoic acid, 99% 506-30-9
2,3-Dichlorotoluene, 98% 32768-54-0
3-Methoxy-1-butanol, 99% 2517-43-3
Germanium Tetrachloride, 99.99% 10038-98-9
2-Naphthaldehyde, 98% 66-99-9
1-Pentanesulfonic acid sodium salt premixed concentrate (Low UV) 67-56-1
Cis-1,2-Cyclohexanedimethanol, 98% 15753-50-1
Tetrabutylammonium Bromide,99% (titr.) 1643-19-2
N,N'-Bis(Phenylmethylene)-1,2-Ethylenediamine, 99.5+% 0-01-1
Wood's Metal 7439-92-1
N,N-Diethyldodecanamide, 98+% 3352-87-2
Thiocarbanilide, 98% 102-08-9
2-Hydroxy-5-nitropyridine, 99+% 5418-51-9
Xylenes, mixed isomers with ethylbenzene (Flash Point 26.1C / 79F; 100-41-4
Xylenol Orange Tetrasodium Salt 3618-43-7
Nile Red, 99% (UV-VIS) 7385-67-3
1-Aminoindan, 99% 34698-41-4
4-Fluorobenzyl Alcohol, 98% 459-56-3
Brilliant Sulphaflavine 2391-30-2
4,4'-Diaminostilbene-2,2'-Disulfonic Acid, 95% (UV-Vis) 81-11-8
n-Methylacetoacetamide, 70 wt % aqueous solution 7732-18-5
Zinc Metal Powder 7440-66-6
cis-1,2-Cyclohexanedicarboxylic anhydride, 99% 13149-00-3
5-Methoxy-2-Methylbenzothiazole 2941-69-7
Zinc acetate dihydrate 557-34-6
Methyl Yellow, indicator grade 60-11-7
Aristolochic acid, mixture of I and II (approx. 1:1) 313-67-7
Ethyl 5-bromo-2-chlorobenzoate, 97% 76008-73-6
Butyl stearate, mixture of ca. 55-65% stearyl- and 25-40% cetyl- 111-06-8
Zinc bromide 7699-45-8
Zinc Carbonate 3486-35-9
(r)-(-)-2-Amino-3-methyl-1-butanol 4276-09-9
Alpha-Fluorocinnamic Acid, 98% 350-90-3
Zinc chloride 7646-85-7
(Iodomethyl)trimethylsilane, 99% 4206-67-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net