**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1643-19-2 |Tetrabutylammonium bromide | 99 | 216-699-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 1643-19-2:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions. Follow the OSHA respirator regulations
found in 29 CFR 1910.134 or European Standard EN 149.
Use a NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: White crystals or crystalline powder
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 103-104C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble in water.
Specific Gravity/Density:
Molecular Formula: (CH3CH2CH2CH2)4NBr
Molecular Weight: 322.1627
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, hydrogen bromide, nitrogen.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1643-19-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetrabutylammonium bromide -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1643-19-2: 3
Canada
CAS# 1643-19-2 is listed on Canada's DSL List.
CAS# 1643-19-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1643-19-2 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/29/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Vinyl Acetate
| 108-05-4 |
|
Dichlorophenylphosphine, 97%
| 644-97-3 |
|
5-Nitro-2-N-(Propylamino)Pyridine
| 25948-11-2 |
|
Ethyl cellulose, Ethoxyl Content 48%, 4 CPS
| 9004-57-3 |
|
Crotyl alcohol, 90% (gc)
| 6117-91-5 |
|
Lead(ii) methanethiolate, 99% (titr.)
| 35029-96-0 |
|
3-exo-Hydroxymethylbicyclo[2.2.1]heptyl-2-exo-amine hydrochloride,
| |
|
4,4'-Sulfonyldiphenol, 99.7% (HPLC)
| 80-09-1 |
|
(Diphenylthiocarbazono)phenylmercury
| 56724-82-4 |
|
3-Iodotoluene, 99%
| 625-95-6 |
|
1(2-Methoxyphenyl)piperazine hydrochloride, 99%(tlc)
| 5464-78-8 |
|
3,3-Dimethyl-1-Butene, 95%
| 558-37-2 |
|
Benzyltriethylammonium chloride, 98%
| 56-37-1 |
|
1-Cyclohexene-1-carboxylic acid, 96% (GC)
| 636-82-8 |
|
4-Bromo-2-Fluorobenzonitrile, 99+%
| 105942-08-3 |
|
Eicosanoic acid, 99%
| 506-30-9 |
|
2,3-Dichlorotoluene, 98%
| 32768-54-0 |
|
3-Methoxy-1-butanol, 99%
| 2517-43-3 |
|
Germanium Tetrachloride, 99.99%
| 10038-98-9 |
|
2-Naphthaldehyde, 98%
| 66-99-9 |
|
1-Pentanesulfonic acid sodium salt premixed concentrate (Low UV)
| 67-56-1 |
|
Cis-1,2-Cyclohexanedimethanol, 98%
| 15753-50-1 |
|
Tetrabutylammonium Bromide,99% (titr.)
| 1643-19-2 |
|
N,N'-Bis(Phenylmethylene)-1,2-Ethylenediamine, 99.5+%
| 0-01-1 |
|
Wood's Metal
| 7439-92-1 |
|
N,N-Diethyldodecanamide, 98+%
| 3352-87-2 |
|
Thiocarbanilide, 98%
| 102-08-9 |
|
2-Hydroxy-5-nitropyridine, 99+%
| 5418-51-9 |
|
Xylenes, mixed isomers with ethylbenzene (Flash Point 26.1C / 79F;
| 100-41-4 |
|
Xylenol Orange Tetrasodium Salt
| 3618-43-7 |
|
Nile Red, 99% (UV-VIS)
| 7385-67-3 |
|
1-Aminoindan, 99%
| 34698-41-4 |
|
4-Fluorobenzyl Alcohol, 98%
| 459-56-3 |
|
Brilliant Sulphaflavine
| 2391-30-2 |
|
4,4'-Diaminostilbene-2,2'-Disulfonic Acid, 95% (UV-Vis)
| 81-11-8 |
|
n-Methylacetoacetamide, 70 wt % aqueous solution
| 7732-18-5 |
|
Zinc Metal Powder
| 7440-66-6 |
|
cis-1,2-Cyclohexanedicarboxylic anhydride, 99%
| 13149-00-3 |
|
5-Methoxy-2-Methylbenzothiazole
| 2941-69-7 |
|
Zinc acetate dihydrate
| 557-34-6 |
|
Methyl Yellow, indicator grade
| 60-11-7 |
|
Aristolochic acid, mixture of I and II (approx. 1:1)
| 313-67-7 |
|
Ethyl 5-bromo-2-chlorobenzoate, 97%
| 76008-73-6 |
|
Butyl stearate, mixture of ca. 55-65% stearyl- and 25-40% cetyl-
| 111-06-8 |
|
Zinc bromide
| 7699-45-8 |
|
Zinc Carbonate
| 3486-35-9 |
|
(r)-(-)-2-Amino-3-methyl-1-butanol
| 4276-09-9 |
|
Alpha-Fluorocinnamic Acid, 98%
| 350-90-3 |
|
Zinc chloride
| 7646-85-7 |
|
(Iodomethyl)trimethylsilane, 99%
| 4206-67-1 |
|
|