Search   
MSDS 
:
 Ethyl cellulose, Ethoxyl Content 48%, 4 CPS
CAS 
:
 9004-57-3
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9004-57-3 |Ethyl Cellulose, Ethoxyl Content 48% | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation. Low hazard for normal industrial
handling.
Skin:
May cause skin irritation. Low hazard for usual industrial handling.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Low hazard for usual industrial handling.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide, or regular foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 9004-57-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white to light tan
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: 4 Centiposes
Boiling Point: Not available.
Freezing/Melting Point: 240-255 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 1.14
Molecular Formula: Not applicable.
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9004-57-3: FJ5950500
LD50/LC50:
CAS# 9004-57-3: Draize test, rabbit, skin: 500 mg/24H Mild; Oral,
rat: LD50 = >5 gm/kg; Skin, rabbit: LD50 = >5 gm/kg.
Carcinogenicity:
Ethyl Cellulose, Ethoxyl Content 48% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 9004-57-3: No information available.
Canada
CAS# 9004-57-3 is listed on Canada's DSL List.
CAS# 9004-57-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9004-57-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/04/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Vinyl Acetate 108-05-4
Dichlorophenylphosphine, 97% 644-97-3
5-Nitro-2-N-(Propylamino)Pyridine 25948-11-2
Ethyl cellulose, Ethoxyl Content 48%, 4 CPS 9004-57-3
Crotyl alcohol, 90% (gc) 6117-91-5
Lead(ii) methanethiolate, 99% (titr.) 35029-96-0
3-exo-Hydroxymethylbicyclo[2.2.1]heptyl-2-exo-amine hydrochloride,
4,4'-Sulfonyldiphenol, 99.7% (HPLC) 80-09-1
(Diphenylthiocarbazono)phenylmercury 56724-82-4
3-Iodotoluene, 99% 625-95-6
1(2-Methoxyphenyl)piperazine hydrochloride, 99%(tlc) 5464-78-8
3,3-Dimethyl-1-Butene, 95% 558-37-2
Benzyltriethylammonium chloride, 98% 56-37-1
1-Cyclohexene-1-carboxylic acid, 96% (GC) 636-82-8
4-Bromo-2-Fluorobenzonitrile, 99+% 105942-08-3
Eicosanoic acid, 99% 506-30-9
2,3-Dichlorotoluene, 98% 32768-54-0
3-Methoxy-1-butanol, 99% 2517-43-3
Germanium Tetrachloride, 99.99% 10038-98-9
2-Naphthaldehyde, 98% 66-99-9
1-Pentanesulfonic acid sodium salt premixed concentrate (Low UV) 67-56-1
Cis-1,2-Cyclohexanedimethanol, 98% 15753-50-1
Tetrabutylammonium Bromide,99% (titr.) 1643-19-2
N,N'-Bis(Phenylmethylene)-1,2-Ethylenediamine, 99.5+% 0-01-1
Wood's Metal 7439-92-1
N,N-Diethyldodecanamide, 98+% 3352-87-2
Thiocarbanilide, 98% 102-08-9
2-Hydroxy-5-nitropyridine, 99+% 5418-51-9
Xylenes, mixed isomers with ethylbenzene (Flash Point 26.1C / 79F; 100-41-4
Xylenol Orange Tetrasodium Salt 3618-43-7
Nile Red, 99% (UV-VIS) 7385-67-3
1-Aminoindan, 99% 34698-41-4
4-Fluorobenzyl Alcohol, 98% 459-56-3
Brilliant Sulphaflavine 2391-30-2
4,4'-Diaminostilbene-2,2'-Disulfonic Acid, 95% (UV-Vis) 81-11-8
n-Methylacetoacetamide, 70 wt % aqueous solution 7732-18-5
Zinc Metal Powder 7440-66-6
cis-1,2-Cyclohexanedicarboxylic anhydride, 99% 13149-00-3
5-Methoxy-2-Methylbenzothiazole 2941-69-7
Zinc acetate dihydrate 557-34-6
Methyl Yellow, indicator grade 60-11-7
Aristolochic acid, mixture of I and II (approx. 1:1) 313-67-7
Ethyl 5-bromo-2-chlorobenzoate, 97% 76008-73-6
Butyl stearate, mixture of ca. 55-65% stearyl- and 25-40% cetyl- 111-06-8
Zinc bromide 7699-45-8
Zinc Carbonate 3486-35-9
(r)-(-)-2-Amino-3-methyl-1-butanol 4276-09-9
Alpha-Fluorocinnamic Acid, 98% 350-90-3
Zinc chloride 7646-85-7
(Iodomethyl)trimethylsilane, 99% 4206-67-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net