Search   
MSDS 
:
 Zinc Metal Powder
CAS 
:
 7440-66-6
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7440-66-6 |Zinc | 100 | 231-175-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 15 17

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Contact with water liberates extremely flammable gases.
Spontaneously flammable in air.Water-reactive.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Inhalation of fumes may cause metal fume fever, which is
characterized by flu-like symptoms with metallic taste, fever,
chills, cough, weakness, chest pain, muscle pain and increased white
blood cell count.
Chronic:
Repeated inhalation may cause chronic bronchitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Wash clothing
before reuse. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
The use of Calcium disodium EDTA as a chelating agent should be
determined by qualified medical personnel.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Water
Reactive. Material will react with water and may release a flammable
and/or toxic gas. Use water spray to keep fire-exposed containers
cool. Containers may explode in the heat of a fire. May ignite or
explode on contact with steam or moist air.
Extinguishing Media:
DO NOT USE WATER! Do NOT get water inside containers. Contact
professional fire-fighters immediately. Cool containers with
flooding quantities of water until well after fire is out. Use dry
sand, dry chemical, soda ash or lime.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Remove all sources of ignition. Use a spark-proof
tool. Provide ventilation. Do not expose spill to water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not allow
water to get into the container because of violent reaction. Avoid
contact with skin and eyes. Avoid ingestion and inhalation. Do not
allow contact with water. Keep from contact with moist air and steam.
Storage:
Store in a cool, dry place. Keep away from water. Keep containers
tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use explosion-proof ventilation equipment. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 7440-66-6:

Germany: 2 mg/m3 TWA (respirable fraction, smoke, With a working
temperature >850 °C, cas

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: blue
Odor: odorless
pH: Not available.
Vapor Pressure: 1 mm Hg @ 487C
Viscosity: Not applicable
Boiling Point: 908 deg C
Freezing/Melting Point: 419 deg C
Autoignition Temperature: 460 deg C ( 860.00 deg F)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Reacts with water
Specific Gravity/Density: 7.14
Molecular Formula: Zn
Molecular Weight: 65.38

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable. Combines vigorously or explosively with water.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, exposure to
moist air or water, mechanical shock.
Incompatibilities with Other Materials:
Halogenated agents, strong oxidizing agents, alkali hydroxides.
Hazardous Decomposition Products:
Toxic fumes of zinc oxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7440-66-6: ZG8600000
LD50/LC50:
Not available.
Carcinogenicity:
Zinc -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ZINC POWDER
Hazard Class: 4.3
UN Number: 1436
Packing Group: II
IMO
Shipping Name: ZINC POWDER
Hazard Class: 4.3
UN Number: 1436
Packing Group: II
RID/ADR
Shipping Name: ZINC POWDER
Hazard Class: 4.3
UN Number: 1436
Packing group: II
USA RQ: CAS# 7440-66-6: 1000 lb final RQ (no reporting of releases of this hazar

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 15 Contact with water liberates extremely
flammable gases.
R 17 Spontaneously flammable in air.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 43H In case of fire, use dry chemical, soda ash,
lime or sand. (Do not use water or foam).
WGK (Water Danger/Protection)
CAS# 7440-66-6: 0
Canada
CAS# 7440-66-6 is listed on Canada's DSL List.
CAS# 7440-66-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-66-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/09/1998 Revision #3 Date: 7/18/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Vinyl Acetate 108-05-4
Dichlorophenylphosphine, 97% 644-97-3
5-Nitro-2-N-(Propylamino)Pyridine 25948-11-2
Ethyl cellulose, Ethoxyl Content 48%, 4 CPS 9004-57-3
Crotyl alcohol, 90% (gc) 6117-91-5
Lead(ii) methanethiolate, 99% (titr.) 35029-96-0
3-exo-Hydroxymethylbicyclo[2.2.1]heptyl-2-exo-amine hydrochloride,
4,4'-Sulfonyldiphenol, 99.7% (HPLC) 80-09-1
(Diphenylthiocarbazono)phenylmercury 56724-82-4
3-Iodotoluene, 99% 625-95-6
1(2-Methoxyphenyl)piperazine hydrochloride, 99%(tlc) 5464-78-8
3,3-Dimethyl-1-Butene, 95% 558-37-2
Benzyltriethylammonium chloride, 98% 56-37-1
1-Cyclohexene-1-carboxylic acid, 96% (GC) 636-82-8
4-Bromo-2-Fluorobenzonitrile, 99+% 105942-08-3
Eicosanoic acid, 99% 506-30-9
2,3-Dichlorotoluene, 98% 32768-54-0
3-Methoxy-1-butanol, 99% 2517-43-3
Germanium Tetrachloride, 99.99% 10038-98-9
2-Naphthaldehyde, 98% 66-99-9
1-Pentanesulfonic acid sodium salt premixed concentrate (Low UV) 67-56-1
Cis-1,2-Cyclohexanedimethanol, 98% 15753-50-1
Tetrabutylammonium Bromide,99% (titr.) 1643-19-2
N,N'-Bis(Phenylmethylene)-1,2-Ethylenediamine, 99.5+% 0-01-1
Wood's Metal 7439-92-1
N,N-Diethyldodecanamide, 98+% 3352-87-2
Thiocarbanilide, 98% 102-08-9
2-Hydroxy-5-nitropyridine, 99+% 5418-51-9
Xylenes, mixed isomers with ethylbenzene (Flash Point 26.1C / 79F; 100-41-4
Xylenol Orange Tetrasodium Salt 3618-43-7
Nile Red, 99% (UV-VIS) 7385-67-3
1-Aminoindan, 99% 34698-41-4
4-Fluorobenzyl Alcohol, 98% 459-56-3
Brilliant Sulphaflavine 2391-30-2
4,4'-Diaminostilbene-2,2'-Disulfonic Acid, 95% (UV-Vis) 81-11-8
n-Methylacetoacetamide, 70 wt % aqueous solution 7732-18-5
Zinc Metal Powder 7440-66-6
cis-1,2-Cyclohexanedicarboxylic anhydride, 99% 13149-00-3
5-Methoxy-2-Methylbenzothiazole 2941-69-7
Zinc acetate dihydrate 557-34-6
Methyl Yellow, indicator grade 60-11-7
Aristolochic acid, mixture of I and II (approx. 1:1) 313-67-7
Ethyl 5-bromo-2-chlorobenzoate, 97% 76008-73-6
Butyl stearate, mixture of ca. 55-65% stearyl- and 25-40% cetyl- 111-06-8
Zinc bromide 7699-45-8
Zinc Carbonate 3486-35-9
(r)-(-)-2-Amino-3-methyl-1-butanol 4276-09-9
Alpha-Fluorocinnamic Acid, 98% 350-90-3
Zinc chloride 7646-85-7
(Iodomethyl)trimethylsilane, 99% 4206-67-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net