**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-00-9 |Furan | 98 | 203-727-3 |
|----------------|--------------------------------------|----------|-----------|
| 128-37-0 |BHT | .03 | 204-881-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T F+
Risk Phrases: 12 19 20/22 38 45 48/22 52/53
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Extremely flammable. May form explosive peroxides. Harmful by
inhalation and if swallowed. Irritating to skin. May cause cancer.
Harmful : danger of serious damage to health by prolonged exposure if
swallowed. Harmful to aquatic organisms; may cause long-term adverse
effects in the aquatic environment.Cancer suspect agent.
Potential Health Effects
Eye:
May cause eye irritation. At high concentrations may cause
lacrimation (tearing) and irritation.
Skin:
May cause skin irritation. May be absorbed through the skin in
harmful amounts. May cause skin sensitization, an allergic reaction,
which becomes evident upon re-exposure to this material.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. May cause liver damage. Possible
aspiration hazard.
Inhalation:
Harmful if inhaled. Irritation may lead to chemical pneumonitis and
pulmonary edema. Vapors may cause dizziness or suffocation. May
cause nausea, dizziness, and headache. Inhalation may cause
respiratory tract irritation, oppression in the chest, dyspnea
(labored breathing), central nervous system depression, and temporary
visual disturbances. Exposure to high concentrations may produce
narcosis, nausea and loss of consciousness.
Chronic:
Chronic exposure may cause liver damage.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Containers may explode in the heat of a fire. Will be easily
ignited by heat, sparks or flame. Extremely flammable liquid and
vapor. Vapor may cause flash fire. Vapors are heavier than air and
may travel to a source of ignition and flash back. Vapors can spread
along the ground and collect in low or confined areas.
Extinguishing Media:
Water may be ineffective. Use dry chemical or foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Provide ventilation. A vapor suppressing
foam may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Ground and bond containers when
transferring material. Avoid contact with eyes, skin, and clothing.
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep container tightly closed. Avoid contact with
heat, sparks and flame. Avoid ingestion and inhalation. If peroxide
formation is suspected, do not open or move container. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames. Do not distill since this
removes peroxide-inhibitors. Use only with adequate ventilation.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Regularly check inhibitor levels to maintain
peroxide levels below 1%. After opening, purge container with
nitrogen before reclosing. Periodically test for peroxide formation
on long-term storage. Addition of water or appropriate reducing
materials will lessen peroxide formation.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low. Ventilation fans
and other electrical service must be non-sparking and have an
explosion-proof design. Use only under a chemical fume hood. Utilize
a closed system process where feasible.
Personal Protective Equipment
Eyes:
Wear chemical goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Appearance: clear, colorless
Odor: pleasant odor - ether-like
pH: Not available.
Vapor Pressure: 600 mm Hg @ 25 deg C
Viscosity: 0.38cP @ 20C
Boiling Point: 31.3 deg C
Freezing/Melting Point: -85.6 deg C
Autoignition Temperature: 360 deg C ( 680.00 deg F)
Flash Point: -35 deg C ( -31.00 deg F)
Explosion Limits, lower: 2.3%
Explosion Limits, upper: 14.3%
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 0.93 g/cm3
Molecular Formula: C4H4O
Molecular Weight: 68.08
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
May form peroxides in the absence of inhibitors. May discolor on
exposure to air. Under normal storage conditions, peroxidizable
compounds can form and accumulate peroxides which may explode when
subjected to heat or shock. This material is most hazardous when
peroxide levels are concentrated by distillation or evaporation.
Conditions to Avoid:
Ignition sources, excess heat, evaporating to near dryness, prolonged
exposure to air.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, oxygen, peroxides.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 110-00-9: LT8524000
CAS# 128-37-0: GO7875000
LD50/LC50:
CAS# 110-00-9: Inhalation, mouse: LC50 = 120 mg/m3/1H; Inhalation,
rat: LC50 = 3398 ppm/1H.
CAS# 128-37-0: Draize test, rabbit, eye: 100 mg/24H Moderate; Draize
test, rabbit, skin: 500 mg/48H Moderate; Oral, mouse: LD50 = 650
mg/kg; Oral, rat: LD50 = 890 mg/kg.
Carcinogenicity:
Furan -
California: carcinogen; initial date 10/1/93
NTP: Suspect carcinogen
OSHA: Possible Select carcinogen
IARC: Group 2B carcinogen
BHT -
ACGIH: A4 - Not Classifiable as a Human Carcinogen
IARC: Group 3 carcinogen
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FURAN
Hazard Class: 3
UN Number: 2389
Packing Group: I
IMO
Shipping Name: FURAN
Hazard Class: 3.1
UN Number: 2389
Packing Group: I
RID/ADR
Shipping Name: FURAN
Dangerous Goods Code: 3(1A)
UN Number: 2389
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T F+
Risk Phrases:
R 12 Extremely flammable.
R 19 May form explosive peroxides.
R 20/22 Harmful by inhalation and if swallowed.
R 38 Irritating to skin.
R 45 May cause cancer.
R 48/22 Harmful : danger of serious damage to health
by prolonged exposure if swallowed.
R 52/53 Harmful to aquatic organisms; may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/Safety data sheets.
WGK (Water Danger/Protection)
CAS# 110-00-9: No information available.
CAS# 128-37-0: 1
United Kingdom Occupational Exposure Limits
Canada
CAS# 110-00-9 is listed on Canada's DSL List.
CAS# 128-37-0 is listed on Canada's DSL List.
CAS# 110-00-9 is not listed on Canada's Ingredient Disclosure List.
CAS# 128-37-0 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 110-00-9: OEL-RUSSIA:STEL 0.5 mg/m3;Skin
CAS# 128-37-0: OEL-AUSTRALIA:TWA 10 mg/m3
OEL-BELGIUM:TWA 10 mg/m3
OEL-FINLAND:TWA 10 mg/m3;STEL 20 mg/m3;Skin
OEL-FRANCE:TWA 10 mg/m3
OEL-THE NETHERLANDS:TWA 10 mg/m3
OEL-SWITZERLAND:TWA 10 mg/m3
OEL-UNITED KINGDOM:TWA 10 mg/m3
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 110-00-9 is listed on the TSCA inventory.
CAS# 128-37-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 6/03/1998 Revision #3 Date: 5/30/2002
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Manganese(IV) Oxide, 99+%, -100 Mesh
| 1313-13-9 |
|
Manganese (II) Sulfate Monohydrate, P. A.
| 10034-96-5 |
|
D-(+)-Mannitol, 98%
| 69-65-8 |
|
D-Mannitol, Reagent ACS
| 69-65-8 |
|
Mercuric acetate, 98%
| 1600-27-7 |
|
Mercury(II) chloride, p.a.
| 7487-94-7 |
|
Mercury (II) Nitrate Monohydrate, P.A.
| 7783-34-8 |
|
Mercury (II) Oxide, Red, 99%
| 21908-53-2 |
|
Mercury (II) Oxide, Yellow
| 21908-53-2 |
|
Mercury (II) Sulfate, 99+%
| 7783-35-9 |
|
Furan, stabilized with 0.025 to 0.04% BHT, 98%
| 110-00-9 |
|
Dimethyl maleate, 96%
| 624-48-6 |
|
Furan
| 110-00-9 |
|
Mercury, 99.999%
| 7439-97-6 |
|
4,4'- Methylenebis-(n,n-dimethylaniline) 99+% (titr.)
| 101-61-1 |
|
2-Methoxyethanol, spectrophotometric grade, 99+%
| 109-86-4 |
|
Methyl cellulose (viscosity: ca 15 cP(2% solution in water))
| 9004-67-5 |
|
5-Amino-1H-Tetrazole Monohydrate, 99%
| 4418-61-5 |
|
Rhenium Heptasulfide, 99%
| 12038-67-4 |
|
4-Methyl-2-Pentanone, 99.5%
| 108-10-1 |
|
Glutaric acid, 99%
| 110-94-1 |
|
4-Methyl-2-Pentanone, P.A.
| 108-10-1 |
|
4-Methyl-2-pentanone
| 108-10-1 |
|
Methyl methacrylate, 99%, stabilized with 10 - 20 ppm MEHQ
| 80-62-6 |
|
1-Ethylpiperidine, 99%
| 766-09-6 |
|
Methyl P-Hydroxybenzoate, 99%
| 99-76-3 |
|
Hydrazine hydrate, 80% (Hydrazine, 51%)
| 302-01-2 |
|
Methyl Red, indicator, p.a.
| 493-52-7 |
|
Methyl Salicylate, 98%
| 119-36-8 |
|
Dichloromethane, stabilized with amylene
| 75-09-2 |
|
Dichloromethane, 99.8%, Spectr. Grade, Stab. With 50 ppm Amylene
| 75-09-2 |
|
Dichloromethane for HPLC, Stabilized With 50 ppm Amylene
| 75-09-2 |
|
Dichloromethane, >99% (GC)
| 75-09-2 |
|
Dichloromethane, Reagent ACS, 99.5% (GC)
| 75-09-2 |
|
Dichloromethane, Reagent ACS, Spectro Grade, 99.5% (GC)
| 75-09-2 |
|
Aniline-2-sulfonic acid, tech., 83%
| 88-21-1 |
|
Ninhydrin, spectrophotometric grade
| 485-47-2 |
|
Cineole, 99%
| 470-82-6 |
|
Phenyl isothiocyanate
| 103-72-0 |
|
Sodium phosphate, monobasic, monohydrate, p.a.
| 7558-80-7 |
|
Morpholine, 99+%
| 110-91-8 |
|
N-Amyl Acetate, 98%
| 628-63-7 |
|
Tetrabutylammonium Phosphate, HPLC Grade, 99% (Titr.)
| 5574-97-0 |
|
n-Butyl acetate, 99+%
| 123-86-4 |
|
4'-Hydroxy-2'-methylacetophenone, 97%
| 875-59-2 |
|
1-Butanol, 99%
| 71-36-3 |
|
1-Bromobutane, 99%
| 109-65-9 |
|
1-Chlorobutane, 99+%
| 109-69-3 |
|
Normal-Butylamine, 99.5% (GC)
| 109-73-9 |
|
3,5-Diiodo-l-tyrosine,dihydrate, 99%
| 300-39-0 |
|
|