Search   
MSDS 
:
 Aniline-2-sulfonic acid, tech., 83%
CAS 
:
 88-21-1
SYNONYMS 
:
 2-Aminobenzenesulfonic acid; Orthanilic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 88-21-1 |Aniline-2-sulfonic acid | 83.0 | 201-810-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.The toxicological properties of this material have not
been fully investigated.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. The toxicological properties of
this substance have not been fully investigated.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Minimize dust generation and accumulation. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Discard
contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 88-21-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: beige to light brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: slightly soluble
Specific Gravity/Density:
Molecular Formula: C6H7NO3S
Molecular Weight: 173.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 88-21-1: DB4727700
LD50/LC50:
Not available.
Carcinogenicity:
Aniline-2-sulfonic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ALKYL SULFONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing Group: III
IMO
Shipping Name: ALKYL SULFONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing Group: III
RID/ADR
Shipping Name: ALKYL SULFONIC ACIDS, SOLID
Hazard Class: 8
UN Number: 2585
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 88-21-1: 1
Canada
CAS# 88-21-1 is listed on Canada's NDSL List.
CAS# 88-21-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 88-21-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/12/1998 Revision #3 Date: 1/27/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Manganese(IV) Oxide, 99+%, -100 Mesh 1313-13-9
Manganese (II) Sulfate Monohydrate, P. A. 10034-96-5
D-(+)-Mannitol, 98% 69-65-8
D-Mannitol, Reagent ACS 69-65-8
Mercuric acetate, 98% 1600-27-7
Mercury(II) chloride, p.a. 7487-94-7
Mercury (II) Nitrate Monohydrate, P.A. 7783-34-8
Mercury (II) Oxide, Red, 99% 21908-53-2
Mercury (II) Oxide, Yellow 21908-53-2
Mercury (II) Sulfate, 99+% 7783-35-9
Furan, stabilized with 0.025 to 0.04% BHT, 98% 110-00-9
Dimethyl maleate, 96% 624-48-6
Furan 110-00-9
Mercury, 99.999% 7439-97-6
4,4'- Methylenebis-(n,n-dimethylaniline) 99+% (titr.) 101-61-1
2-Methoxyethanol, spectrophotometric grade, 99+% 109-86-4
Methyl cellulose (viscosity: ca 15 cP(2% solution in water)) 9004-67-5
5-Amino-1H-Tetrazole Monohydrate, 99% 4418-61-5
Rhenium Heptasulfide, 99% 12038-67-4
4-Methyl-2-Pentanone, 99.5% 108-10-1
Glutaric acid, 99% 110-94-1
4-Methyl-2-Pentanone, P.A. 108-10-1
4-Methyl-2-pentanone 108-10-1
Methyl methacrylate, 99%, stabilized with 10 - 20 ppm MEHQ 80-62-6
1-Ethylpiperidine, 99% 766-09-6
Methyl P-Hydroxybenzoate, 99% 99-76-3
Hydrazine hydrate, 80% (Hydrazine, 51%) 302-01-2
Methyl Red, indicator, p.a. 493-52-7
Methyl Salicylate, 98% 119-36-8
Dichloromethane, stabilized with amylene 75-09-2
Dichloromethane, 99.8%, Spectr. Grade, Stab. With 50 ppm Amylene 75-09-2
Dichloromethane for HPLC, Stabilized With 50 ppm Amylene 75-09-2
Dichloromethane, >99% (GC) 75-09-2
Dichloromethane, Reagent ACS, 99.5% (GC) 75-09-2
Dichloromethane, Reagent ACS, Spectro Grade, 99.5% (GC) 75-09-2
Aniline-2-sulfonic acid, tech., 83% 88-21-1
Ninhydrin, spectrophotometric grade 485-47-2
Cineole, 99% 470-82-6
Phenyl isothiocyanate 103-72-0
Sodium phosphate, monobasic, monohydrate, p.a. 7558-80-7
Morpholine, 99+% 110-91-8
N-Amyl Acetate, 98% 628-63-7
Tetrabutylammonium Phosphate, HPLC Grade, 99% (Titr.) 5574-97-0
n-Butyl acetate, 99+% 123-86-4
4'-Hydroxy-2'-methylacetophenone, 97% 875-59-2
1-Butanol, 99% 71-36-3
1-Bromobutane, 99% 109-65-9
1-Chlorobutane, 99+% 109-69-3
Normal-Butylamine, 99.5% (GC) 109-73-9
3,5-Diiodo-l-tyrosine,dihydrate, 99% 300-39-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net