**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1600-27-7 |Mercuric acetate | >98 | 216-491-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+ N
Risk Phrases: 26/27/28 33 50/53
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Very toxic by inhalation, in contact with skin and if swallowed.
Danger of cumulative effects. Very toxic to aquatic organisms, may
cause long-term adverse effects in the aquatic environment.Highly
toxic.Corrosive.Light sensitive.Heat sensitive.
Potential Health Effects
Eye:
Causes severe eye irritation. May cause eye burns. May cause eye
injury.
Skin:
Causes skin irritation. Harmful if absorbed through the skin. May
cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. May cause severe
irritation and possible burns. May cause skin discoloration.
Ingestion:
May be fatal if swallowed. May cause irritation of the digestive
tract. May cause kidney damage.
Inhalation:
Harmful if inhaled. May cause irritation of the respiratory tract
with burning pain in the nose and throat, coughing, wheezing,
shortness of breath and pulmonary edema. May cause effects similar
to those described for ingestion.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those
of acute inhalation and ingestion. Prolonged or repeated exposure
may cause gastrointestinal irritation and kidney damage. Chronic
exposure to mercury may cause permanent central nervous system
damage, fatigue, weight loss, tremors, personality changes.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Substance is noncombustible.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Use only in a
chemical fume hood. Do not breathe dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Poison room
locked.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use only under a chemical fume hood.
Exposure Limits
CAS# 1600-27-7:
United States OSHA: 0.1 mg/m3 Ceiling (listed under Mercury, ary
and inorganic compounds).
Belgium - TWA: (listed as mercury, aryl and inorganic compounds):
mg/m3 VLE (as Hg)
France - VME: (listed as mercury, aryl and inorganic compounds):
mg/m3 VME (as Hg)
Germany: (listed as mercury, aryl and inorganic compounds): 0.1 m
VME (as Hg)
Malaysia: (listed as mercury, aryl and inorganic compounds): 0.1
mg/m3 TWA (as Hg)
Spain: (listed as mercury, aryl and inorganic compounds): 0.1 mg/
VLA-ED (as Hg)
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: almost white
Odor: Slight odor of acetic acid
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 179 - 182 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: SOLUBLE IN WATER: 364 G/L (20C)
Specific Gravity/Density: 3.2500g/cm3
Molecular Formula: C4H6HgO4
Molecular Weight: 318.67
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong acids.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, mercury/mercury oxides.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1600-27-7: AI8575000
LD50/LC50:
CAS# 1600-27-7: Oral, mouse: LD50 = 23900 ug/kg; Oral, rat: LD50 =
40900 ug/kg; Skin, rat: LD50 = 570 mg/kg.
Carcinogenicity:
Mercuric acetate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: MERCURY ACETATE
Hazard Class: 6.1
UN Number: 1629
Packing Group: II
IMO
Shipping Name: MERCURY ACETATE
Hazard Class: 6.1
UN Number: 1629
Packing Group: II
RID/ADR
Shipping Name: MERCURY ACETATE
Hazard Class: 6.1
UN Number: 1629
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+ N
Risk Phrases:
R 26/27/28 Very toxic by inhalation, in contact with
skin and if swallowed.
R 33 Danger of cumulative effects.
R 50/53 Very toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 13 Keep away from food, drink and animal feeding
stuffs.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36 Wear suitable protective clothing.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 60 This material and its container must be
disposed of as hazardous waste.
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 1600-27-7: 3
Canada
CAS# 1600-27-7 is listed on Canada's DSL List.
CAS# 1600-27-7 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1600-27-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/29/1998 Revision #4 Date: 10/05/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Manganese(IV) Oxide, 99+%, -100 Mesh
| 1313-13-9 |
|
Manganese (II) Sulfate Monohydrate, P. A.
| 10034-96-5 |
|
D-(+)-Mannitol, 98%
| 69-65-8 |
|
D-Mannitol, Reagent ACS
| 69-65-8 |
|
Mercuric acetate, 98%
| 1600-27-7 |
|
Mercury(II) chloride, p.a.
| 7487-94-7 |
|
Mercury (II) Nitrate Monohydrate, P.A.
| 7783-34-8 |
|
Mercury (II) Oxide, Red, 99%
| 21908-53-2 |
|
Mercury (II) Oxide, Yellow
| 21908-53-2 |
|
Mercury (II) Sulfate, 99+%
| 7783-35-9 |
|
Furan, stabilized with 0.025 to 0.04% BHT, 98%
| 110-00-9 |
|
Dimethyl maleate, 96%
| 624-48-6 |
|
Furan
| 110-00-9 |
|
Mercury, 99.999%
| 7439-97-6 |
|
4,4'- Methylenebis-(n,n-dimethylaniline) 99+% (titr.)
| 101-61-1 |
|
2-Methoxyethanol, spectrophotometric grade, 99+%
| 109-86-4 |
|
Methyl cellulose (viscosity: ca 15 cP(2% solution in water))
| 9004-67-5 |
|
5-Amino-1H-Tetrazole Monohydrate, 99%
| 4418-61-5 |
|
Rhenium Heptasulfide, 99%
| 12038-67-4 |
|
4-Methyl-2-Pentanone, 99.5%
| 108-10-1 |
|
Glutaric acid, 99%
| 110-94-1 |
|
4-Methyl-2-Pentanone, P.A.
| 108-10-1 |
|
4-Methyl-2-pentanone
| 108-10-1 |
|
Methyl methacrylate, 99%, stabilized with 10 - 20 ppm MEHQ
| 80-62-6 |
|
1-Ethylpiperidine, 99%
| 766-09-6 |
|
Methyl P-Hydroxybenzoate, 99%
| 99-76-3 |
|
Hydrazine hydrate, 80% (Hydrazine, 51%)
| 302-01-2 |
|
Methyl Red, indicator, p.a.
| 493-52-7 |
|
Methyl Salicylate, 98%
| 119-36-8 |
|
Dichloromethane, stabilized with amylene
| 75-09-2 |
|
Dichloromethane, 99.8%, Spectr. Grade, Stab. With 50 ppm Amylene
| 75-09-2 |
|
Dichloromethane for HPLC, Stabilized With 50 ppm Amylene
| 75-09-2 |
|
Dichloromethane, >99% (GC)
| 75-09-2 |
|
Dichloromethane, Reagent ACS, 99.5% (GC)
| 75-09-2 |
|
Dichloromethane, Reagent ACS, Spectro Grade, 99.5% (GC)
| 75-09-2 |
|
Aniline-2-sulfonic acid, tech., 83%
| 88-21-1 |
|
Ninhydrin, spectrophotometric grade
| 485-47-2 |
|
Cineole, 99%
| 470-82-6 |
|
Phenyl isothiocyanate
| 103-72-0 |
|
Sodium phosphate, monobasic, monohydrate, p.a.
| 7558-80-7 |
|
Morpholine, 99+%
| 110-91-8 |
|
N-Amyl Acetate, 98%
| 628-63-7 |
|
Tetrabutylammonium Phosphate, HPLC Grade, 99% (Titr.)
| 5574-97-0 |
|
n-Butyl acetate, 99+%
| 123-86-4 |
|
4'-Hydroxy-2'-methylacetophenone, 97%
| 875-59-2 |
|
1-Butanol, 99%
| 71-36-3 |
|
1-Bromobutane, 99%
| 109-65-9 |
|
1-Chlorobutane, 99+%
| 109-69-3 |
|
Normal-Butylamine, 99.5% (GC)
| 109-73-9 |
|
3,5-Diiodo-l-tyrosine,dihydrate, 99%
| 300-39-0 |
|
|