Search   
MSDS 
:
 Methyl P-Hydroxybenzoate, 99%
CAS 
:
 99-76-3
SYNONYMS 
:
 4-Hydroxybenzoic Acid Methyl Ester; Methyl Paraben; Methyl     Parahydroxybenzoate; Metoxyde; Moldex; Methyl P-Oxybenzoate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 99-76-3 |Methyl P-Hydroxybenzoate | 99.0 | 202-785-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause moderate eye irritation.
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Repeated exposure may cause sensitization dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear. Do
NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Wear a self contained breathing apparatus and
appropriate personal protection. (See Exposure Controls, Personal
Protection section). Sweep up, then place into a suitable container
for disposal. Avoid generating dusty conditions. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with skin and eyes. Keep
container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 99-76-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: faint odor
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: 270 - 280C
Freezing/Melting Point: 125.00 - 127.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble in water.
Specific Gravity/Density:
Molecular Formula: C8H8O3
Molecular Weight: 152.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 99-76-3: DH2450000
LD50/LC50:
CAS# 99-76-3: Oral, mouse: LD50 = >8 gm/kg; Oral, rabbit: LD50 = 6
gm/kg.
Carcinogenicity:
Methyl P-Hydroxybenzoate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 99-76-3: 2
Canada
CAS# 99-76-3 is listed on Canada's DSL List.
CAS# 99-76-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 99-76-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/22/1998 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Manganese(IV) Oxide, 99+%, -100 Mesh 1313-13-9
Manganese (II) Sulfate Monohydrate, P. A. 10034-96-5
D-(+)-Mannitol, 98% 69-65-8
D-Mannitol, Reagent ACS 69-65-8
Mercuric acetate, 98% 1600-27-7
Mercury(II) chloride, p.a. 7487-94-7
Mercury (II) Nitrate Monohydrate, P.A. 7783-34-8
Mercury (II) Oxide, Red, 99% 21908-53-2
Mercury (II) Oxide, Yellow 21908-53-2
Mercury (II) Sulfate, 99+% 7783-35-9
Furan, stabilized with 0.025 to 0.04% BHT, 98% 110-00-9
Dimethyl maleate, 96% 624-48-6
Furan 110-00-9
Mercury, 99.999% 7439-97-6
4,4'- Methylenebis-(n,n-dimethylaniline) 99+% (titr.) 101-61-1
2-Methoxyethanol, spectrophotometric grade, 99+% 109-86-4
Methyl cellulose (viscosity: ca 15 cP(2% solution in water)) 9004-67-5
5-Amino-1H-Tetrazole Monohydrate, 99% 4418-61-5
Rhenium Heptasulfide, 99% 12038-67-4
4-Methyl-2-Pentanone, 99.5% 108-10-1
Glutaric acid, 99% 110-94-1
4-Methyl-2-Pentanone, P.A. 108-10-1
4-Methyl-2-pentanone 108-10-1
Methyl methacrylate, 99%, stabilized with 10 - 20 ppm MEHQ 80-62-6
1-Ethylpiperidine, 99% 766-09-6
Methyl P-Hydroxybenzoate, 99% 99-76-3
Hydrazine hydrate, 80% (Hydrazine, 51%) 302-01-2
Methyl Red, indicator, p.a. 493-52-7
Methyl Salicylate, 98% 119-36-8
Dichloromethane, stabilized with amylene 75-09-2
Dichloromethane, 99.8%, Spectr. Grade, Stab. With 50 ppm Amylene 75-09-2
Dichloromethane for HPLC, Stabilized With 50 ppm Amylene 75-09-2
Dichloromethane, >99% (GC) 75-09-2
Dichloromethane, Reagent ACS, 99.5% (GC) 75-09-2
Dichloromethane, Reagent ACS, Spectro Grade, 99.5% (GC) 75-09-2
Aniline-2-sulfonic acid, tech., 83% 88-21-1
Ninhydrin, spectrophotometric grade 485-47-2
Cineole, 99% 470-82-6
Phenyl isothiocyanate 103-72-0
Sodium phosphate, monobasic, monohydrate, p.a. 7558-80-7
Morpholine, 99+% 110-91-8
N-Amyl Acetate, 98% 628-63-7
Tetrabutylammonium Phosphate, HPLC Grade, 99% (Titr.) 5574-97-0
n-Butyl acetate, 99+% 123-86-4
4'-Hydroxy-2'-methylacetophenone, 97% 875-59-2
1-Butanol, 99% 71-36-3
1-Bromobutane, 99% 109-65-9
1-Chlorobutane, 99+% 109-69-3
Normal-Butylamine, 99.5% (GC) 109-73-9
3,5-Diiodo-l-tyrosine,dihydrate, 99% 300-39-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net