Search   
MSDS 
:
 Furan
CAS 
:
 110-00-9
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-00-9 |Furan | 99+ | 203-727-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F+
Risk Phrases: 12 19

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Extremely flammable. May form explosive peroxides.

Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately. Do NOT induce vomiting. If conscious and
alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Extremely flammable. Material will readily ignite
at room temperature.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep away from heat, sparks and flame.
Storage:
Keep away from heat, sparks, and flame. Keep refrigerated. (Store
below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 110-00-9:

Russia: 0.5 mg/m3 TWA

Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure. Wear appropriate protective
gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Wear a NIOSH/MSHA
or European Standard EN 149 approved full-facepiece
airline respirator in the positive pressure mode with
emergency escape provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Not available.
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: 670 mbar @ 20 C
Viscosity: Not available.
Boiling Point: 31 - 33 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9370g/cm3
Molecular Formula:
Molecular Weight: 68.08

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents, acids.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-00-9: LT8524000
LD50/LC50:
CAS# 110-00-9: Inhalation, mouse: LC50 = 120 mg/m3/1H; Inhalation,
rat: LC50 = 3398 ppm/1H.
Carcinogenicity:
Furan -
California: carcinogen, initial date 10/1/93
NTP: Suspect carcinogen
IARC: Group 2B carcinogen
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Furan
Hazard Class: 3
UN Number: 2389
Packing Group: I
IMO
Shipping Name: FURAN
Hazard Class: 3
UN Number: 2389
Packing Group: I
RID/ADR
Shipping Name: Furan
Hazard Class: 3
UN Number: 2389
Packing group:
USA RQ: CAS# 110-00-9: 100 lb final RQ; 45.4 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F+
Risk Phrases:
R 12 Extremely flammable.
R 19 May form explosive peroxides.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 110-00-9: No information available.
Canada
CAS# 110-00-9 is listed on Canada's DSL List.
CAS# 110-00-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-00-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/02/1998 Revision #4 Date: 9/20/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Manganese(IV) Oxide, 99+%, -100 Mesh 1313-13-9
Manganese (II) Sulfate Monohydrate, P. A. 10034-96-5
D-(+)-Mannitol, 98% 69-65-8
D-Mannitol, Reagent ACS 69-65-8
Mercuric acetate, 98% 1600-27-7
Mercury(II) chloride, p.a. 7487-94-7
Mercury (II) Nitrate Monohydrate, P.A. 7783-34-8
Mercury (II) Oxide, Red, 99% 21908-53-2
Mercury (II) Oxide, Yellow 21908-53-2
Mercury (II) Sulfate, 99+% 7783-35-9
Furan, stabilized with 0.025 to 0.04% BHT, 98% 110-00-9
Dimethyl maleate, 96% 624-48-6
Furan 110-00-9
Mercury, 99.999% 7439-97-6
4,4'- Methylenebis-(n,n-dimethylaniline) 99+% (titr.) 101-61-1
2-Methoxyethanol, spectrophotometric grade, 99+% 109-86-4
Methyl cellulose (viscosity: ca 15 cP(2% solution in water)) 9004-67-5
5-Amino-1H-Tetrazole Monohydrate, 99% 4418-61-5
Rhenium Heptasulfide, 99% 12038-67-4
4-Methyl-2-Pentanone, 99.5% 108-10-1
Glutaric acid, 99% 110-94-1
4-Methyl-2-Pentanone, P.A. 108-10-1
4-Methyl-2-pentanone 108-10-1
Methyl methacrylate, 99%, stabilized with 10 - 20 ppm MEHQ 80-62-6
1-Ethylpiperidine, 99% 766-09-6
Methyl P-Hydroxybenzoate, 99% 99-76-3
Hydrazine hydrate, 80% (Hydrazine, 51%) 302-01-2
Methyl Red, indicator, p.a. 493-52-7
Methyl Salicylate, 98% 119-36-8
Dichloromethane, stabilized with amylene 75-09-2
Dichloromethane, 99.8%, Spectr. Grade, Stab. With 50 ppm Amylene 75-09-2
Dichloromethane for HPLC, Stabilized With 50 ppm Amylene 75-09-2
Dichloromethane, >99% (GC) 75-09-2
Dichloromethane, Reagent ACS, 99.5% (GC) 75-09-2
Dichloromethane, Reagent ACS, Spectro Grade, 99.5% (GC) 75-09-2
Aniline-2-sulfonic acid, tech., 83% 88-21-1
Ninhydrin, spectrophotometric grade 485-47-2
Cineole, 99% 470-82-6
Phenyl isothiocyanate 103-72-0
Sodium phosphate, monobasic, monohydrate, p.a. 7558-80-7
Morpholine, 99+% 110-91-8
N-Amyl Acetate, 98% 628-63-7
Tetrabutylammonium Phosphate, HPLC Grade, 99% (Titr.) 5574-97-0
n-Butyl acetate, 99+% 123-86-4
4'-Hydroxy-2'-methylacetophenone, 97% 875-59-2
1-Butanol, 99% 71-36-3
1-Bromobutane, 99% 109-65-9
1-Chlorobutane, 99+% 109-69-3
Normal-Butylamine, 99.5% (GC) 109-73-9
3,5-Diiodo-l-tyrosine,dihydrate, 99% 300-39-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net