Search   
MSDS 
:
 Pimelic acid, 98%
CAS 
:
 111-16-0
SYNONYMS 
:
 Heptanedioic acid ; 1,5-Pentanedicarboxylic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 111-16-0 |PIMELIC ACID | 98 | 203-840-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Low hazard for usual industrial handling.
Ingestion:
May cause irritation of the digestive tract. Expected to be a low
ingestion hazard.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. This material in sufficient quantity and reduced
particle size is capable of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with skin and eyes. Keep
container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 111-16-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to light beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 212 deg C @ 10.00mm Hg
Freezing/Melting Point: 103 - 106 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 25 G/L IN WATER (13C)
Specific Gravity/Density: 1.329
Molecular Formula: C7H12O4
Molecular Weight: 160.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizers, bases, reducing agents
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 111-16-0: TK3677000
LD50/LC50:
CAS# 111-16-0: Oral, mouse: LD50 = 4800 mg/kg; Oral, rat: LD50 = 7
gm/kg.
Carcinogenicity:
PIMELIC ACID -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 111-16-0: No information available.
Canada
CAS# 111-16-0 is listed on Canada's DSL List.
CAS# 111-16-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 111-16-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tropylium Hexafluorophosphate 29663-54-5
3-(4-Cyanobenzoyl)-5,7-Dimethoxycoumarin 83179-55-9
Adenine-9-Beta-D-Arabinofuranoside- 5'-Monophosphate, 98% 29984-33-6
4-Tert-Butylaniline, 99% 769-92-6
4,4'-Dicyanobibenzyl
Isoquinoline, 99% (GC) 119-65-3
(2-Naphthoxy)Acetic Acid, N-Hydroxysuccinimide Ester, 98% 81012-92-2
Pentafluorophenylhydrazine, 97% 828-73-9
Diphenyl Phosphate, 99% 838-85-7
Manganese(II) bromide tetrahydrate, 98% 10031-20-6
Sulfur trioxide, stabilized, 99% 7446-11-9
epsilon-Caprolactam 105-60-2
2-Bromo-1-Phenylpropane, 98% 2114-39-8
1,1-Bis(Methylseleno)-Ethane 56051-04-8
4-Chloro-2-methylthiopyrimidine, 98% 49844-90-8
4-Cyanobenzoic Acid, 99% 619-65-8
2,2'-Diaminobibenzyl, 96% 0-00-1
(-)-Dihydrocarvyl acetate, mixture of isomers, 99% 20777-49-5
Cyclobutanecarboxylic Acid Chloride, 99% 5006-22-4
4-Methoxybenzylisothiocyanate 3694-57-3
Bis(MSB), scintillation grade, 99.5% 13280-61-0
1-Octene, 97% 111-66-0
Bromoacetaldehyde dimethyl acetal, 97%, stabilized with 0.2% 7252-83-7
d-Histidine hydrochloride monohydrate 99% 6341-24-8
Pimelic acid, 98% 111-16-0
Trans-Beta-Hydromuconic Acid, 98% 4436-74-2
Nickel(ii) acetylacetonate dihydrate, 99+% (titr.) 3264-82-2
Ethyl Allophanate 626-36-8
2,6-Dimethylpyrazine, ca 96% (nmr), balanc e 2,5-isomer 108-50-9
(1,3-Dioxolan-2-ylmethyl)triphenyl phosphonium bromide, 98% 52509-14-5
3,3'-Thiodipropanol, 98% 10595-09-2
2-Imidazolidinethione, paraffinic oil coated powder 96-45-7
Coumarin 7, Laser Grade, 99% (UV-Vis) 27425-55-4
Bemegride, 99+% 64-65-3
DL-3(Methylthio)-2-Butanone 99% 53475-15-3
Methyl (trimethylsilyl)acetate, 98% 2916-76-9
3-Methylindole, 98% 83-34-1
Titanium(IV) isopropoxide, 98+% 546-68-9
2-Hydroxy-4,5-Dimethylacetophenone, 98% 36436-65-4
Allyl sulfide, 97% 592-88-1
Dehydroacetic acid, 98% 520-26-3
Lactulose, 50 Wt% Solution in Water 4618-18-2
Ethylene/propylene copolymer, low molecular weight 9010-79-1
D-(+)-Altrose, 99% 1990-29-0
Ftorafur, 99% 17902-23-7
L(-)-Perillaldehyde, 90% (Titr.) 18031-40-8
3-Amino-5-Methylisoxazole, 98+% 1072-67-9
Yttrium atomic absorption standard solution, 1 mg/ml Y in 2% HNO3 7440-65-5
1,6-Dibromo-2-Naphthol, 99% 16239-18-2
4,4'-Dimethoxytrityl chloride 98% 40615-36-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net