**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5006-22-4 |Cyclobutanecarboxylic Ccid Chloride | 99 | 225-680-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable. Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. Ingestion of large amounts may cause CNS depression. May
cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. Vapors may cause dizziness or suffocation. May
cause systemic effects. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Use only in a well-ventilated area. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Do not ingest
or inhale. Discard contaminated shoes. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Keep refrigerated. (Store below 4C/39F.)
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 5006-22-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: butyl-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 60 deg C @ 50.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 37 deg C ( 98.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H7ClO
Molecular Weight: 118.56
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 5006-22-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Cyclobutanecarboxylic Ccid Chloride -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: I
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: I
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 34 Causes burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 5006-22-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5006-22-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5006-22-4 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Tropylium Hexafluorophosphate
| 29663-54-5 |
|
3-(4-Cyanobenzoyl)-5,7-Dimethoxycoumarin
| 83179-55-9 |
|
Adenine-9-Beta-D-Arabinofuranoside- 5'-Monophosphate, 98%
| 29984-33-6 |
|
4-Tert-Butylaniline, 99%
| 769-92-6 |
|
4,4'-Dicyanobibenzyl
| |
|
Isoquinoline, 99% (GC)
| 119-65-3 |
|
(2-Naphthoxy)Acetic Acid, N-Hydroxysuccinimide Ester, 98%
| 81012-92-2 |
|
Pentafluorophenylhydrazine, 97%
| 828-73-9 |
|
Diphenyl Phosphate, 99%
| 838-85-7 |
|
Manganese(II) bromide tetrahydrate, 98%
| 10031-20-6 |
|
Sulfur trioxide, stabilized, 99%
| 7446-11-9 |
|
epsilon-Caprolactam
| 105-60-2 |
|
2-Bromo-1-Phenylpropane, 98%
| 2114-39-8 |
|
1,1-Bis(Methylseleno)-Ethane
| 56051-04-8 |
|
4-Chloro-2-methylthiopyrimidine, 98%
| 49844-90-8 |
|
4-Cyanobenzoic Acid, 99%
| 619-65-8 |
|
2,2'-Diaminobibenzyl, 96%
| 0-00-1 |
|
(-)-Dihydrocarvyl acetate, mixture of isomers, 99%
| 20777-49-5 |
|
Cyclobutanecarboxylic Acid Chloride, 99%
| 5006-22-4 |
|
4-Methoxybenzylisothiocyanate
| 3694-57-3 |
|
Bis(MSB), scintillation grade, 99.5%
| 13280-61-0 |
|
1-Octene, 97%
| 111-66-0 |
|
Bromoacetaldehyde dimethyl acetal, 97%, stabilized with 0.2%
| 7252-83-7 |
|
d-Histidine hydrochloride monohydrate 99%
| 6341-24-8 |
|
Pimelic acid, 98%
| 111-16-0 |
|
Trans-Beta-Hydromuconic Acid, 98%
| 4436-74-2 |
|
Nickel(ii) acetylacetonate dihydrate, 99+% (titr.)
| 3264-82-2 |
|
Ethyl Allophanate
| 626-36-8 |
|
2,6-Dimethylpyrazine, ca 96% (nmr), balanc e 2,5-isomer
| 108-50-9 |
|
(1,3-Dioxolan-2-ylmethyl)triphenyl phosphonium bromide, 98%
| 52509-14-5 |
|
3,3'-Thiodipropanol, 98%
| 10595-09-2 |
|
2-Imidazolidinethione, paraffinic oil coated powder
| 96-45-7 |
|
Coumarin 7, Laser Grade, 99% (UV-Vis)
| 27425-55-4 |
|
Bemegride, 99+%
| 64-65-3 |
|
DL-3(Methylthio)-2-Butanone 99%
| 53475-15-3 |
|
Methyl (trimethylsilyl)acetate, 98%
| 2916-76-9 |
|
3-Methylindole, 98%
| 83-34-1 |
|
Titanium(IV) isopropoxide, 98+%
| 546-68-9 |
|
2-Hydroxy-4,5-Dimethylacetophenone, 98%
| 36436-65-4 |
|
Allyl sulfide, 97%
| 592-88-1 |
|
Dehydroacetic acid, 98%
| 520-26-3 |
|
Lactulose, 50 Wt% Solution in Water
| 4618-18-2 |
|
Ethylene/propylene copolymer, low molecular weight
| 9010-79-1 |
|
D-(+)-Altrose, 99%
| 1990-29-0 |
|
Ftorafur, 99%
| 17902-23-7 |
|
L(-)-Perillaldehyde, 90% (Titr.)
| 18031-40-8 |
|
3-Amino-5-Methylisoxazole, 98+%
| 1072-67-9 |
|
Yttrium atomic absorption standard solution, 1 mg/ml Y in 2% HNO3
| 7440-65-5 |
|
1,6-Dibromo-2-Naphthol, 99%
| 16239-18-2 |
|
4,4'-Dimethoxytrityl chloride 98%
| 40615-36-9 |
|
|