Search   
MSDS 
:
 4,4'-Dicyanobibenzyl
CAS 
:
 
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Avoid breathing dust, vapor, mist, or gas. Do
not get on skin or in eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: very slightly beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 199 - 202 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C16H12N2
Molecular Weight: 232.28

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
No CAS#s in product.
LD50/LC50:
Carcinogenicity:

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
US FEDERAL
TSCA

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tropylium Hexafluorophosphate 29663-54-5
3-(4-Cyanobenzoyl)-5,7-Dimethoxycoumarin 83179-55-9
Adenine-9-Beta-D-Arabinofuranoside- 5'-Monophosphate, 98% 29984-33-6
4-Tert-Butylaniline, 99% 769-92-6
4,4'-Dicyanobibenzyl
Isoquinoline, 99% (GC) 119-65-3
(2-Naphthoxy)Acetic Acid, N-Hydroxysuccinimide Ester, 98% 81012-92-2
Pentafluorophenylhydrazine, 97% 828-73-9
Diphenyl Phosphate, 99% 838-85-7
Manganese(II) bromide tetrahydrate, 98% 10031-20-6
Sulfur trioxide, stabilized, 99% 7446-11-9
epsilon-Caprolactam 105-60-2
2-Bromo-1-Phenylpropane, 98% 2114-39-8
1,1-Bis(Methylseleno)-Ethane 56051-04-8
4-Chloro-2-methylthiopyrimidine, 98% 49844-90-8
4-Cyanobenzoic Acid, 99% 619-65-8
2,2'-Diaminobibenzyl, 96% 0-00-1
(-)-Dihydrocarvyl acetate, mixture of isomers, 99% 20777-49-5
Cyclobutanecarboxylic Acid Chloride, 99% 5006-22-4
4-Methoxybenzylisothiocyanate 3694-57-3
Bis(MSB), scintillation grade, 99.5% 13280-61-0
1-Octene, 97% 111-66-0
Bromoacetaldehyde dimethyl acetal, 97%, stabilized with 0.2% 7252-83-7
d-Histidine hydrochloride monohydrate 99% 6341-24-8
Pimelic acid, 98% 111-16-0
Trans-Beta-Hydromuconic Acid, 98% 4436-74-2
Nickel(ii) acetylacetonate dihydrate, 99+% (titr.) 3264-82-2
Ethyl Allophanate 626-36-8
2,6-Dimethylpyrazine, ca 96% (nmr), balanc e 2,5-isomer 108-50-9
(1,3-Dioxolan-2-ylmethyl)triphenyl phosphonium bromide, 98% 52509-14-5
3,3'-Thiodipropanol, 98% 10595-09-2
2-Imidazolidinethione, paraffinic oil coated powder 96-45-7
Coumarin 7, Laser Grade, 99% (UV-Vis) 27425-55-4
Bemegride, 99+% 64-65-3
DL-3(Methylthio)-2-Butanone 99% 53475-15-3
Methyl (trimethylsilyl)acetate, 98% 2916-76-9
3-Methylindole, 98% 83-34-1
Titanium(IV) isopropoxide, 98+% 546-68-9
2-Hydroxy-4,5-Dimethylacetophenone, 98% 36436-65-4
Allyl sulfide, 97% 592-88-1
Dehydroacetic acid, 98% 520-26-3
Lactulose, 50 Wt% Solution in Water 4618-18-2
Ethylene/propylene copolymer, low molecular weight 9010-79-1
D-(+)-Altrose, 99% 1990-29-0
Ftorafur, 99% 17902-23-7
L(-)-Perillaldehyde, 90% (Titr.) 18031-40-8
3-Amino-5-Methylisoxazole, 98+% 1072-67-9
Yttrium atomic absorption standard solution, 1 mg/ml Y in 2% HNO3 7440-65-5
1,6-Dibromo-2-Naphthol, 99% 16239-18-2
4,4'-Dimethoxytrityl chloride 98% 40615-36-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net