**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 96-45-7 |2-Imidazolidinethione | 98 | 202-506-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 22 61
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. May cause harm to the unborn child.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May cause allergic sensitization in certain
individuals.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed. Rapidly absorbed when
ingested and disseminated throughout the body.
Inhalation:
Causes irritation of the mucous membrane and upper respiratory
tract.
Chronic:
Possible cancer hazard based on tests with laboratory animals.
Laboratory experiments have resulted in mutagenic effects. May be
rapidly transferred across the placenta and cause adverse fetal
effects.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Avoid breathing dust, vapor, mist, or
gas. Avoid contact with eyes, skin, and clothing. Keep container
tightly closed. Avoid ingestion and inhalation. Wash clothing before
reuse.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 96-45-7:
Netherlands: 0.024 mg/m3 MAC
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystalline powder
Color: off-white
Odor: faint odor - amine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 198-204 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C3H6N2S
Molecular Weight: 102.15
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Acrolein, strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 96-45-7: NI9625000
LD50/LC50:
CAS# 96-45-7: Draize test, rabbit, eye: 500 mg/24H Mild; Oral,
mouse: LD50 = 3 gm/kg; Oral, rat: LD50 = 1832 mg/kg.
Carcinogenicity:
2-Imidazolidinethione -
California: carcinogen, initial date 1/1/88
NTP: Suspect carcinogen
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Ecotoxicity:
Fish: Goldfish: LC50 = 7500 mg/L; 96 Hr; Static bioassayWater flea
Daphnia: EC50 = 26.4 mg/L; 48 Hr; Static bioassayBacteria:
Phytobacterium phosphoreum: EC50 = 2080-2450 mg/L; 15 min; Microtox
testIf released to soil, 2-Imidazolidinethione is readily degraded
with half-lives of less than one week observed under field
conditions. Although soil microorganisms can degrade
2-Imidazolidinethione, degradation in soil may be accomplished by
chemical conversion to ethyleneurea followed by microbial attack. It
is expected to be highly mobile in most wet soils with the exception
of soils with high organic content. Strong adsorption and/or
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
USA RQ: CAS# 96-45-7: 10 lb final RQ; 4.54 kg final RQ
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 61 May cause harm to the unborn child.
R 22 Harmful if swallowed.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 96-45-7: No information available.
Canada
CAS# 96-45-7 is listed on Canada's DSL List.
CAS# 96-45-7 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 96-45-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/20/1999 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Tropylium Hexafluorophosphate
| 29663-54-5 |
|
3-(4-Cyanobenzoyl)-5,7-Dimethoxycoumarin
| 83179-55-9 |
|
Adenine-9-Beta-D-Arabinofuranoside- 5'-Monophosphate, 98%
| 29984-33-6 |
|
4-Tert-Butylaniline, 99%
| 769-92-6 |
|
4,4'-Dicyanobibenzyl
| |
|
Isoquinoline, 99% (GC)
| 119-65-3 |
|
(2-Naphthoxy)Acetic Acid, N-Hydroxysuccinimide Ester, 98%
| 81012-92-2 |
|
Pentafluorophenylhydrazine, 97%
| 828-73-9 |
|
Diphenyl Phosphate, 99%
| 838-85-7 |
|
Manganese(II) bromide tetrahydrate, 98%
| 10031-20-6 |
|
Sulfur trioxide, stabilized, 99%
| 7446-11-9 |
|
epsilon-Caprolactam
| 105-60-2 |
|
2-Bromo-1-Phenylpropane, 98%
| 2114-39-8 |
|
1,1-Bis(Methylseleno)-Ethane
| 56051-04-8 |
|
4-Chloro-2-methylthiopyrimidine, 98%
| 49844-90-8 |
|
4-Cyanobenzoic Acid, 99%
| 619-65-8 |
|
2,2'-Diaminobibenzyl, 96%
| 0-00-1 |
|
(-)-Dihydrocarvyl acetate, mixture of isomers, 99%
| 20777-49-5 |
|
Cyclobutanecarboxylic Acid Chloride, 99%
| 5006-22-4 |
|
4-Methoxybenzylisothiocyanate
| 3694-57-3 |
|
Bis(MSB), scintillation grade, 99.5%
| 13280-61-0 |
|
1-Octene, 97%
| 111-66-0 |
|
Bromoacetaldehyde dimethyl acetal, 97%, stabilized with 0.2%
| 7252-83-7 |
|
d-Histidine hydrochloride monohydrate 99%
| 6341-24-8 |
|
Pimelic acid, 98%
| 111-16-0 |
|
Trans-Beta-Hydromuconic Acid, 98%
| 4436-74-2 |
|
Nickel(ii) acetylacetonate dihydrate, 99+% (titr.)
| 3264-82-2 |
|
Ethyl Allophanate
| 626-36-8 |
|
2,6-Dimethylpyrazine, ca 96% (nmr), balanc e 2,5-isomer
| 108-50-9 |
|
(1,3-Dioxolan-2-ylmethyl)triphenyl phosphonium bromide, 98%
| 52509-14-5 |
|
3,3'-Thiodipropanol, 98%
| 10595-09-2 |
|
2-Imidazolidinethione, paraffinic oil coated powder
| 96-45-7 |
|
Coumarin 7, Laser Grade, 99% (UV-Vis)
| 27425-55-4 |
|
Bemegride, 99+%
| 64-65-3 |
|
DL-3(Methylthio)-2-Butanone 99%
| 53475-15-3 |
|
Methyl (trimethylsilyl)acetate, 98%
| 2916-76-9 |
|
3-Methylindole, 98%
| 83-34-1 |
|
Titanium(IV) isopropoxide, 98+%
| 546-68-9 |
|
2-Hydroxy-4,5-Dimethylacetophenone, 98%
| 36436-65-4 |
|
Allyl sulfide, 97%
| 592-88-1 |
|
Dehydroacetic acid, 98%
| 520-26-3 |
|
Lactulose, 50 Wt% Solution in Water
| 4618-18-2 |
|
Ethylene/propylene copolymer, low molecular weight
| 9010-79-1 |
|
D-(+)-Altrose, 99%
| 1990-29-0 |
|
Ftorafur, 99%
| 17902-23-7 |
|
L(-)-Perillaldehyde, 90% (Titr.)
| 18031-40-8 |
|
3-Amino-5-Methylisoxazole, 98+%
| 1072-67-9 |
|
Yttrium atomic absorption standard solution, 1 mg/ml Y in 2% HNO3
| 7440-65-5 |
|
1,6-Dibromo-2-Naphthol, 99%
| 16239-18-2 |
|
4,4'-Dimethoxytrityl chloride 98%
| 40615-36-9 |
|
|