Search   
MSDS 
:
 1,3-Propane sultone, 99% (gc)
CAS 
:
 1120-71-4
SYNONYMS 
:
 1,2-oxathiolane-2,2-dioxide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1120-71-4 |1,3-propane sultone | 99.0 | 214-317-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 21/22 45

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed. May cause
cancer.Corrosive.

Potential Health Effects
Eye:
Causes severe eye irritation and possible burns.
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. Causes severe burns.
Ingestion:
Harmful if swallowed. May cause severe gastrointestinal tract
irritation with nausea, vomiting and possible burns. May cause
central nervous system effects.
Inhalation:
May cause respiratory tract irritation.
Chronic:
May cause cancer in humans.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Discard contaminated clothing in a manner which limits further
exposure.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air.
Extinguishing Media:
Use water spray, dry chemical, or carbon dioxide. Do NOT get water
inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation. Do not get
water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1120-71-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: colorless or almost colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: 0.05 mm Hg @20C
Viscosity: Not available.
Boiling Point: 295 deg C
Freezing/Melting Point: 30.00 - 33.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Decomposes.
Specific Gravity/Density: 1.3920g/cm3
Molecular Formula: C3H6O3S
Molecular Weight: 122.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable. However, may react slowly with water forming corrosive acid.
Conditions to Avoid:
Incompatible materials, contact with water.
Incompatibilities with Other Materials:
Strong oxidizing agents, bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1120-71-4: RP5425000
LD50/LC50:
CAS# 1120-71-4: Draize test, rabbit, skin: 500 mg Mild; Oral, mouse:
LD50 = 400 mg/kg; Oral, rat: LD50 = 100 mg/kg.
Oral, Rat: LD50 = 100-200 mg/kg
Carcinogenicity:
1,3-propane sultone -
ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to
California: carcinogen, initial date 1/1/88
NTP: Suspect carcinogen
IARC: Group 2B carcinogen
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
USA RQ: CAS# 1120-71-4: 10 lb final RQ; 4.54 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 45 May cause cancer.
R 21/22 Harmful in contact with skin and if
swallowed.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 24/25 Avoid contact with skin and eyes.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1120-71-4: 3
Canada
CAS# 1120-71-4 is listed on Canada's DSL List.
CAS# 1120-71-4 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1120-71-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/11/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dichlorodimethylsilane, 99% 75-78-5
2-Mesitylenesulfonyl Chloride, 99% 773-64-8
5-Norbornen-2-ol (mixture of endo and exo), 99% 13080-90-5
1,3-Dithiane, 97% 505-23-7
Alpha-D-Cellobiose Octaacetate 5346-90-7
4-Bromobiphenyl, 99% 92-66-0
1,2,3-Heptanetriol 103404-57-5
1-Bromononane, 97% 693-58-3
2-Vinylnaphthalene, 98% Stabilized with 0.4% P-Tert.-Butylcatechol 827-54-3
4-Nitrophenylhydrazine, 10-18% water added, 95% 100-16-3
2-Methyl-1-pentene, 99% 763-29-1
2,5-Dimethylanisole, 99% 1706-11-2
1-Decene, 95% 872-05-9
Methyl s-(-)-lactate, 98% 27871-49-4
3,5-Dibromo-O-Phenylenediamine Mono- Hydrochloride, 99% 75568-11-5
2'-Methylacetophenone, 98% 577-16-2
Ethyl 1-piperidineacetate, 98+% 23853-10-3
1,1,4,4-Tetraphenyl-1,3-Butadiene, Scintillation Grade, 99+% 1450-63-1
3-Chloropropanesulfonyl Chloride, 96% 1633-82-5
Nigrosine, water soluble 8005-03-6
Platinum(ii) iodide, 98.5% 7790-39-8
n-Benzyltropinone, 96% (tlc) 28957-72-4
Acetonylacetone, 97% 110-13-4
(1,4'-Bipiperidine)-4'-carboxamide, 99+% 39633-82-4
Tetraethyleneglycol Monomethyl Ether, 98% (GC) 23783-42-8
Metaldehyde 108-62-3
n-Butyl vinyl ether, 98% 111-34-2
Poly(Alpha-Methylstyrene) 25014-31-7
Copper(II) acetylacetonate, 99% 13395-16-9
Perfluoro(methylcyclohexane), 96% 355-02-2
4-Bromo-2-Fluorophenol, 98% 2105-94-4
2,4-Hexadienoic acid 110-44-1
4-Octyloxyaniline, 98% (Titr.) 39905-45-8
D(+)-galacturonic acid monohydrate, 99% 685-73-4
1,3,3-Trimethoxypropene, 96% (GC), Cis/Trans Mixture: 20/80, 17576-35-1
Sodium Omadine , 40% Aqueous Solution 3811-73-2
Dibenzothiophene sulfone, 97% 1016-05-3
Ethyl 3-Pyridylacetate, 99% 39931-77-6
Iodoacetamide, 98% 144-48-9
Sodium nitroferricyanide dihydrate, reagent ACS, crystals 13755-38-9
1,3-Propane sultone, 99% (gc) 1120-71-4
2-Bromo-4'-methoxyacetophenone, 98% 2632-13-5
2-Thiopheneglyoxylic acid, 97% 4075-59-6
2-Chloro-4-Fluorobenzylcyanide, 99+% 75279-56-0
2-Acetylthiazole, 99% 24295-03-2
2-(Trifluoromethyl)-phenothiazine, 97% 92-30-8
m-Anisic acid, 98% 586-38-9
2-(N-Butylperfluorooctanesulfonamido)ethyl acrylate, stabilized, 77% 383-07-3
3,4-Dichlorobenzaldehyde, 98% 6287-38-3
Silver Vanadate, 98% (Titr.) 13497-94-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net