Search   
MSDS 
:
 2-Thiopheneglyoxylic acid, 97%
CAS 
:
 4075-59-6
SYNONYMS 
:
 alpha-Oxo-2-thiopheneacetic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4075-59-6 |2-Thiopheneglyoxylic acid | 97 | 223-794-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
Causes gastrointestinal tract burns. May cause perforation of the
digestive tract. May cause cardiac disturbances. May cause central
nervous system effects. May cause systemic effects.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. Causes chemical burns to the respiratory tract. Aspiration
may lead to pulmonary edema. May cause cardiac abnormalities. May
cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Containers may explode
when heated. Non-combustible, substance itself does not burn but may
decompose upon heating to produce corrosive and/or toxic fumes.
Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Do NOT use water directly on fire. Use water spray to cool
fire-exposed containers. Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Minimize dust generation and
accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale. Wash clothing before reuse. Discard contaminated
shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area. Store protected from
moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4075-59-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: yellow to green
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 88.00 - 91.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H4O3S
Molecular Weight: 156.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4075-59-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Thiopheneglyoxylic acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 4075-59-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 4075-59-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4075-59-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #7 Date: 8/25/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dichlorodimethylsilane, 99% 75-78-5
2-Mesitylenesulfonyl Chloride, 99% 773-64-8
5-Norbornen-2-ol (mixture of endo and exo), 99% 13080-90-5
1,3-Dithiane, 97% 505-23-7
Alpha-D-Cellobiose Octaacetate 5346-90-7
4-Bromobiphenyl, 99% 92-66-0
1,2,3-Heptanetriol 103404-57-5
1-Bromononane, 97% 693-58-3
2-Vinylnaphthalene, 98% Stabilized with 0.4% P-Tert.-Butylcatechol 827-54-3
4-Nitrophenylhydrazine, 10-18% water added, 95% 100-16-3
2-Methyl-1-pentene, 99% 763-29-1
2,5-Dimethylanisole, 99% 1706-11-2
1-Decene, 95% 872-05-9
Methyl s-(-)-lactate, 98% 27871-49-4
3,5-Dibromo-O-Phenylenediamine Mono- Hydrochloride, 99% 75568-11-5
2'-Methylacetophenone, 98% 577-16-2
Ethyl 1-piperidineacetate, 98+% 23853-10-3
1,1,4,4-Tetraphenyl-1,3-Butadiene, Scintillation Grade, 99+% 1450-63-1
3-Chloropropanesulfonyl Chloride, 96% 1633-82-5
Nigrosine, water soluble 8005-03-6
Platinum(ii) iodide, 98.5% 7790-39-8
n-Benzyltropinone, 96% (tlc) 28957-72-4
Acetonylacetone, 97% 110-13-4
(1,4'-Bipiperidine)-4'-carboxamide, 99+% 39633-82-4
Tetraethyleneglycol Monomethyl Ether, 98% (GC) 23783-42-8
Metaldehyde 108-62-3
n-Butyl vinyl ether, 98% 111-34-2
Poly(Alpha-Methylstyrene) 25014-31-7
Copper(II) acetylacetonate, 99% 13395-16-9
Perfluoro(methylcyclohexane), 96% 355-02-2
4-Bromo-2-Fluorophenol, 98% 2105-94-4
2,4-Hexadienoic acid 110-44-1
4-Octyloxyaniline, 98% (Titr.) 39905-45-8
D(+)-galacturonic acid monohydrate, 99% 685-73-4
1,3,3-Trimethoxypropene, 96% (GC), Cis/Trans Mixture: 20/80, 17576-35-1
Sodium Omadine , 40% Aqueous Solution 3811-73-2
Dibenzothiophene sulfone, 97% 1016-05-3
Ethyl 3-Pyridylacetate, 99% 39931-77-6
Iodoacetamide, 98% 144-48-9
Sodium nitroferricyanide dihydrate, reagent ACS, crystals 13755-38-9
1,3-Propane sultone, 99% (gc) 1120-71-4
2-Bromo-4'-methoxyacetophenone, 98% 2632-13-5
2-Thiopheneglyoxylic acid, 97% 4075-59-6
2-Chloro-4-Fluorobenzylcyanide, 99+% 75279-56-0
2-Acetylthiazole, 99% 24295-03-2
2-(Trifluoromethyl)-phenothiazine, 97% 92-30-8
m-Anisic acid, 98% 586-38-9
2-(N-Butylperfluorooctanesulfonamido)ethyl acrylate, stabilized, 77% 383-07-3
3,4-Dichlorobenzaldehyde, 98% 6287-38-3
Silver Vanadate, 98% (Titr.) 13497-94-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net