**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1633-82-5 |3-Chloropropanesulfonyl Chloride | 96 | 216-646-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.Moisture sensitive.Lachrymator (substance
which increases the flow of tears).
Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears). May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Vapors may be heavier than air. They can spread
along the ground and collect in low or confined areas. Containers may
explode when heated.
Extinguishing Media:
Do NOT get water inside containers. For small fires, use dry
chemical, carbon dioxide, or water spray. For large fires, use dry
chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Cool containers with flooding quantities of water until well after
fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Absorb spill using
an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as sawdust.
Provide ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Use only in a well-ventilated area. Do not breathe dust, vapor,
mist, or gas. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Do not allow
contact with water. Discard contaminated shoes. Keep from contact
with moist air and steam.
Storage:
Keep container closed when not in use. Corrosives area. Store
protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1633-82-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: chlorine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 70 deg C @ .50mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 109 deg C (> 228.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.4560g/cm3
Molecular Formula: C3H6Cl2O2S
Molecular Weight: 177.05
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat.
Incompatibilities with Other Materials:
Moisture, alcohols, strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1633-82-5: TZ6670000
LD50/LC50:
Not available.
Carcinogenicity:
3-Chloropropanesulfonyl Chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 1633-82-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1633-82-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1633-82-5 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Dichlorodimethylsilane, 99%
| 75-78-5 |
|
2-Mesitylenesulfonyl Chloride, 99%
| 773-64-8 |
|
5-Norbornen-2-ol (mixture of endo and exo), 99%
| 13080-90-5 |
|
1,3-Dithiane, 97%
| 505-23-7 |
|
Alpha-D-Cellobiose Octaacetate
| 5346-90-7 |
|
4-Bromobiphenyl, 99%
| 92-66-0 |
|
1,2,3-Heptanetriol
| 103404-57-5 |
|
1-Bromononane, 97%
| 693-58-3 |
|
2-Vinylnaphthalene, 98% Stabilized with 0.4% P-Tert.-Butylcatechol
| 827-54-3 |
|
4-Nitrophenylhydrazine, 10-18% water added, 95%
| 100-16-3 |
|
2-Methyl-1-pentene, 99%
| 763-29-1 |
|
2,5-Dimethylanisole, 99%
| 1706-11-2 |
|
1-Decene, 95%
| 872-05-9 |
|
Methyl s-(-)-lactate, 98%
| 27871-49-4 |
|
3,5-Dibromo-O-Phenylenediamine Mono- Hydrochloride, 99%
| 75568-11-5 |
|
2'-Methylacetophenone, 98%
| 577-16-2 |
|
Ethyl 1-piperidineacetate, 98+%
| 23853-10-3 |
|
1,1,4,4-Tetraphenyl-1,3-Butadiene, Scintillation Grade, 99+%
| 1450-63-1 |
|
3-Chloropropanesulfonyl Chloride, 96%
| 1633-82-5 |
|
Nigrosine, water soluble
| 8005-03-6 |
|
Platinum(ii) iodide, 98.5%
| 7790-39-8 |
|
n-Benzyltropinone, 96% (tlc)
| 28957-72-4 |
|
Acetonylacetone, 97%
| 110-13-4 |
|
(1,4'-Bipiperidine)-4'-carboxamide, 99+%
| 39633-82-4 |
|
Tetraethyleneglycol Monomethyl Ether, 98% (GC)
| 23783-42-8 |
|
Metaldehyde
| 108-62-3 |
|
n-Butyl vinyl ether, 98%
| 111-34-2 |
|
Poly(Alpha-Methylstyrene)
| 25014-31-7 |
|
Copper(II) acetylacetonate, 99%
| 13395-16-9 |
|
Perfluoro(methylcyclohexane), 96%
| 355-02-2 |
|
4-Bromo-2-Fluorophenol, 98%
| 2105-94-4 |
|
2,4-Hexadienoic acid
| 110-44-1 |
|
4-Octyloxyaniline, 98% (Titr.)
| 39905-45-8 |
|
D(+)-galacturonic acid monohydrate, 99%
| 685-73-4 |
|
1,3,3-Trimethoxypropene, 96% (GC), Cis/Trans Mixture: 20/80,
| 17576-35-1 |
|
Sodium Omadine , 40% Aqueous Solution
| 3811-73-2 |
|
Dibenzothiophene sulfone, 97%
| 1016-05-3 |
|
Ethyl 3-Pyridylacetate, 99%
| 39931-77-6 |
|
Iodoacetamide, 98%
| 144-48-9 |
|
Sodium nitroferricyanide dihydrate, reagent ACS, crystals
| 13755-38-9 |
|
1,3-Propane sultone, 99% (gc)
| 1120-71-4 |
|
2-Bromo-4'-methoxyacetophenone, 98%
| 2632-13-5 |
|
2-Thiopheneglyoxylic acid, 97%
| 4075-59-6 |
|
2-Chloro-4-Fluorobenzylcyanide, 99+%
| 75279-56-0 |
|
2-Acetylthiazole, 99%
| 24295-03-2 |
|
2-(Trifluoromethyl)-phenothiazine, 97%
| 92-30-8 |
|
m-Anisic acid, 98%
| 586-38-9 |
|
2-(N-Butylperfluorooctanesulfonamido)ethyl acrylate, stabilized, 77%
| 383-07-3 |
|
3,4-Dichlorobenzaldehyde, 98%
| 6287-38-3 |
|
Silver Vanadate, 98% (Titr.)
| 13497-94-4 |
|
|