Search   
MSDS 
:
 2-(N-Butylperfluorooctanesulfonamido)ethyl acrylate, stabilized, 77%
CAS 
:
 383-07-3
SYNONYMS 
:
 2-Propenoic acid, 2-[butyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl     ester; 2-[Butyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl acrylate;     liquid monomer for incorporating perfluoroalkyl groups in polymers.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 383-07-3 |2-[Butyl[(heptadecafluorooctyl)sulfony| 77 | 206-846-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin. The toxicological properties of this material have not been
fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Polymerizes readily if not inhibited; heat
can initiate reaction.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not let this chemical enter the environment.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Keep refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 383-07-3:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: brown-yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C17H16F17NO4S
Molecular Weight: 653.35

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. This material is a
monomer and may polymerize under certain conditions if the stabilizer
is lost.
Conditions to Avoid:
High temperatures, loss of inhibitor.
Incompatibilities with Other Materials:
Strong oxidizing agents, polymerizing initiators.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 383-07-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-[Butyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl acrylate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 383-07-3: No information available.
Canada
CAS# 383-07-3 is listed on Canada's NDSL List.
CAS# 383-07-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 383-07-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/11/1999 Revision #3 Date: 11/26/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dichlorodimethylsilane, 99% 75-78-5
2-Mesitylenesulfonyl Chloride, 99% 773-64-8
5-Norbornen-2-ol (mixture of endo and exo), 99% 13080-90-5
1,3-Dithiane, 97% 505-23-7
Alpha-D-Cellobiose Octaacetate 5346-90-7
4-Bromobiphenyl, 99% 92-66-0
1,2,3-Heptanetriol 103404-57-5
1-Bromononane, 97% 693-58-3
2-Vinylnaphthalene, 98% Stabilized with 0.4% P-Tert.-Butylcatechol 827-54-3
4-Nitrophenylhydrazine, 10-18% water added, 95% 100-16-3
2-Methyl-1-pentene, 99% 763-29-1
2,5-Dimethylanisole, 99% 1706-11-2
1-Decene, 95% 872-05-9
Methyl s-(-)-lactate, 98% 27871-49-4
3,5-Dibromo-O-Phenylenediamine Mono- Hydrochloride, 99% 75568-11-5
2'-Methylacetophenone, 98% 577-16-2
Ethyl 1-piperidineacetate, 98+% 23853-10-3
1,1,4,4-Tetraphenyl-1,3-Butadiene, Scintillation Grade, 99+% 1450-63-1
3-Chloropropanesulfonyl Chloride, 96% 1633-82-5
Nigrosine, water soluble 8005-03-6
Platinum(ii) iodide, 98.5% 7790-39-8
n-Benzyltropinone, 96% (tlc) 28957-72-4
Acetonylacetone, 97% 110-13-4
(1,4'-Bipiperidine)-4'-carboxamide, 99+% 39633-82-4
Tetraethyleneglycol Monomethyl Ether, 98% (GC) 23783-42-8
Metaldehyde 108-62-3
n-Butyl vinyl ether, 98% 111-34-2
Poly(Alpha-Methylstyrene) 25014-31-7
Copper(II) acetylacetonate, 99% 13395-16-9
Perfluoro(methylcyclohexane), 96% 355-02-2
4-Bromo-2-Fluorophenol, 98% 2105-94-4
2,4-Hexadienoic acid 110-44-1
4-Octyloxyaniline, 98% (Titr.) 39905-45-8
D(+)-galacturonic acid monohydrate, 99% 685-73-4
1,3,3-Trimethoxypropene, 96% (GC), Cis/Trans Mixture: 20/80, 17576-35-1
Sodium Omadine , 40% Aqueous Solution 3811-73-2
Dibenzothiophene sulfone, 97% 1016-05-3
Ethyl 3-Pyridylacetate, 99% 39931-77-6
Iodoacetamide, 98% 144-48-9
Sodium nitroferricyanide dihydrate, reagent ACS, crystals 13755-38-9
1,3-Propane sultone, 99% (gc) 1120-71-4
2-Bromo-4'-methoxyacetophenone, 98% 2632-13-5
2-Thiopheneglyoxylic acid, 97% 4075-59-6
2-Chloro-4-Fluorobenzylcyanide, 99+% 75279-56-0
2-Acetylthiazole, 99% 24295-03-2
2-(Trifluoromethyl)-phenothiazine, 97% 92-30-8
m-Anisic acid, 98% 586-38-9
2-(N-Butylperfluorooctanesulfonamido)ethyl acrylate, stabilized, 77% 383-07-3
3,4-Dichlorobenzaldehyde, 98% 6287-38-3
Silver Vanadate, 98% (Titr.) 13497-94-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net