Search   
MSDS 
:
 Bromocresol Purple, Indicator Grade
CAS 
:
 115-40-2
SYNONYMS 
:
 5',5'-Dibromo-o-cresol sulfophthalein
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 115-40-2 |Bromocresol Purple | 100 | 204-087-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
Dust may cause mechanical irritation. Low hazard for usual
industrial handling.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Expected to be a low ingestion hazard.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Water or foam may cause frothing.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use with adequate ventilation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Wash clothing before reuse.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Keep from contact with oxidizing materials. Store in a
cool, dry, well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 115-40-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: pink
Odor: Odorless.
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 245 deg C
Autoignition Temperature: Not available.
Flash Point: 245 deg C ( 473.00 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: 245 deg C
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C21H16Br2O5S
Molecular Weight: 540.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable. However, may decompose if heated.
Conditions to Avoid:
Incompatible materials, ignition sources, strong oxidants,
temperatures above 140C.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 115-40-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Bromocresol Purple -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 115-40-2: No information available.
Canada
CAS# 115-40-2 is listed on Canada's DSL List.
CAS# 115-40-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 115-40-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/01/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Acetyl acetone 123-54-6
25,27-Dimethoxy-26-(N-tosyl)carbamoyloxy-p-tert-butylcalix[4]arene, 325776-14-5
25,27-Dimethoxy-26-(N-benzoyl)carbamoyloxy-p-tert-butylcalix[4]arene, 325776-15-6
Poly-D-leucine 0-01-1
AMPSO, BioGRADE 68399-79-1
BIS TRIS, BioGRADE 6976-37-0
CAPSO, BioGRADE 73463-39-5
DIPSO, Biograde 68399-80-4
Barium chloride dihydrate, reagent ACS, crystals 10326-27-9
MOPSO, Biograde 68399-77-9
Barium Diphenylaminesulfonate, Indicator Grade 6211-24-1
PIPES 1.5 Na Salt, Biograde 7732-18-5
4-(Methylthio)benzaldehyde, 98% 3446-89-7
Digitonin 11024-24-1
POPSO, BioGRADE 68189-43-5
TAPSO, iograde 68399-81-5
(R)-(-)-Glycidyl nosylate, 98% 115314-17-5
TES, biograde 7365-44-8
1,1,2,2-Tetrabromoethane 79-27-6
Barium hydroxide octahydrate, reagent ACS, 98+% 12230-71-6
Vinylbenzyl Alcohol, Mixture of Isomers 7732-18-5
Triethyl orthopropionate,98+% 115-80-0
1-Chloro-1-Phenylethane, 97% 672-65-1
Fluorescein isothiocyanate I hydrochloride, 99%, certified 0-01-1
Barium sulfate, extra pure 7727-43-7
Ammonium Persulfate, DNase, RNase and Protease Free 7727-54-0
Benzaldehyde 100-52-7
Phenol, Stabilized, DNase, RNase and Protease free 108-95-2
Acetylsalicylic Acid 99% 50-78-2
Boric Acid 10043-35-3
N,N-Dimethylformamide, DNase, RNase, Protease free 68-12-2
Methyl sulfoxide, DNase, RNase, Protease free 67-68-5
DL-Dithiothreitol, DNase, RNase, Protease Free 27565-41-9
Benzoic acid, p.a. 65-85-0
Benzophenone, 99+% 119-61-9
Benzotriazol-1-yloxytris(dimethylamino) phosphonium 56602-33-6
Benzoyl peroxide, 75%, remainder water 94-36-0
Methylcyclohexane, 99% 108-87-2
(1S)-1-(2-Chlorophenyl)Ethane-1,2-Diol, 95% 0-01-1
m-Toluoyl chloride, 99% 1711-06-4
(-)-Cis-2-Oxabicyclo(3.3.0)Oct-6-En-3-One, 97% 0-01-1
Bismuth(III) oxide 1304-76-3
(S)-(-)-2-(tert-Butoxycarbonylamino)3-phenyl-1-propanol, 98% 66605-57-0
Formamide, DNase, RNase and Protease free 75-12-7
Beeswax, White 8012-89-3
Tin(IV) chloride pentahydrate, 98+% 7646-78-8
5-Bromo-4-Chloro-3-Indolyl-??-D-Galactoside, DNase, RNase and Protease 7240-90-6
Bromocresol Purple, Indicator Grade 115-40-2
Glycerol, DNase RNase and Protease free 56-81-5
Acridine Orange Hemizinc Salt 10127-02-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net