Search   
MSDS 
:
 TES, biograde
CAS 
:
 7365-44-8
SYNONYMS 
:
 2-[Tris(hydroxymethyl)methylamino]-1-ethanesulfonic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7365-44-8 |2-[Tris(hydroxymethyl)methylamino]-1-e| > 99.0 | 230-906-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
No information found.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 7365-44-8:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 223 - 225 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density:
Molecular Formula: (HOCH2)3CNHCH2CH2SO3H
Molecular Weight: 229.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7365-44-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-[Tris(hydroxymethyl)methylamino]-1-ethanesulfonic acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7365-44-8: No information available.
Canada
CAS# 7365-44-8 is listed on Canada's DSL List.
CAS# 7365-44-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7365-44-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/02/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Acetyl acetone 123-54-6
25,27-Dimethoxy-26-(N-tosyl)carbamoyloxy-p-tert-butylcalix[4]arene, 325776-14-5
25,27-Dimethoxy-26-(N-benzoyl)carbamoyloxy-p-tert-butylcalix[4]arene, 325776-15-6
Poly-D-leucine 0-01-1
AMPSO, BioGRADE 68399-79-1
BIS TRIS, BioGRADE 6976-37-0
CAPSO, BioGRADE 73463-39-5
DIPSO, Biograde 68399-80-4
Barium chloride dihydrate, reagent ACS, crystals 10326-27-9
MOPSO, Biograde 68399-77-9
Barium Diphenylaminesulfonate, Indicator Grade 6211-24-1
PIPES 1.5 Na Salt, Biograde 7732-18-5
4-(Methylthio)benzaldehyde, 98% 3446-89-7
Digitonin 11024-24-1
POPSO, BioGRADE 68189-43-5
TAPSO, iograde 68399-81-5
(R)-(-)-Glycidyl nosylate, 98% 115314-17-5
TES, biograde 7365-44-8
1,1,2,2-Tetrabromoethane 79-27-6
Barium hydroxide octahydrate, reagent ACS, 98+% 12230-71-6
Vinylbenzyl Alcohol, Mixture of Isomers 7732-18-5
Triethyl orthopropionate,98+% 115-80-0
1-Chloro-1-Phenylethane, 97% 672-65-1
Fluorescein isothiocyanate I hydrochloride, 99%, certified 0-01-1
Barium sulfate, extra pure 7727-43-7
Ammonium Persulfate, DNase, RNase and Protease Free 7727-54-0
Benzaldehyde 100-52-7
Phenol, Stabilized, DNase, RNase and Protease free 108-95-2
Acetylsalicylic Acid 99% 50-78-2
Boric Acid 10043-35-3
N,N-Dimethylformamide, DNase, RNase, Protease free 68-12-2
Methyl sulfoxide, DNase, RNase, Protease free 67-68-5
DL-Dithiothreitol, DNase, RNase, Protease Free 27565-41-9
Benzoic acid, p.a. 65-85-0
Benzophenone, 99+% 119-61-9
Benzotriazol-1-yloxytris(dimethylamino) phosphonium 56602-33-6
Benzoyl peroxide, 75%, remainder water 94-36-0
Methylcyclohexane, 99% 108-87-2
(1S)-1-(2-Chlorophenyl)Ethane-1,2-Diol, 95% 0-01-1
m-Toluoyl chloride, 99% 1711-06-4
(-)-Cis-2-Oxabicyclo(3.3.0)Oct-6-En-3-One, 97% 0-01-1
Bismuth(III) oxide 1304-76-3
(S)-(-)-2-(tert-Butoxycarbonylamino)3-phenyl-1-propanol, 98% 66605-57-0
Formamide, DNase, RNase and Protease free 75-12-7
Beeswax, White 8012-89-3
Tin(IV) chloride pentahydrate, 98+% 7646-78-8
5-Bromo-4-Chloro-3-Indolyl-??-D-Galactoside, DNase, RNase and Protease 7240-90-6
Bromocresol Purple, Indicator Grade 115-40-2
Glycerol, DNase RNase and Protease free 56-81-5
Acridine Orange Hemizinc Salt 10127-02-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net