Search   
MSDS 
:
 Benzotriazol-1-yloxytris(dimethylamino) phosphonium
CAS 
:
 56602-33-6
SYNONYMS 
:
 Benzotriazol-1-yl-oxy-tris(dimethylamino) phosphonium     hexafluorophosphate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 56602-33-6 |Benxotrioazol-1-yloxy-(dimethylamino) | 100 | 260-279-1 |
| |phosphonium hexalfuorophosphate | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully
investigated.Moisture sensitive.Light sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use with adequate ventilation. Avoid contact with skin and eyes.
Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep refrigerated. (Store below
4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 56602-33-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: @ 760.00mm Hg
Freezing/Melting Point: 138 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C12H22F6N6OP2
Molecular Weight: 442.27

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 56602-33-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benxotrioazol-1-yloxy-(dimethylamino) phosphonium
hexalfuorophosphate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 56602-33-6: No information available.
Canada
CAS# 56602-33-6 is listed on Canada's DSL List.
CAS# 56602-33-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 56602-33-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Acetyl acetone 123-54-6
25,27-Dimethoxy-26-(N-tosyl)carbamoyloxy-p-tert-butylcalix[4]arene, 325776-14-5
25,27-Dimethoxy-26-(N-benzoyl)carbamoyloxy-p-tert-butylcalix[4]arene, 325776-15-6
Poly-D-leucine 0-01-1
AMPSO, BioGRADE 68399-79-1
BIS TRIS, BioGRADE 6976-37-0
CAPSO, BioGRADE 73463-39-5
DIPSO, Biograde 68399-80-4
Barium chloride dihydrate, reagent ACS, crystals 10326-27-9
MOPSO, Biograde 68399-77-9
Barium Diphenylaminesulfonate, Indicator Grade 6211-24-1
PIPES 1.5 Na Salt, Biograde 7732-18-5
4-(Methylthio)benzaldehyde, 98% 3446-89-7
Digitonin 11024-24-1
POPSO, BioGRADE 68189-43-5
TAPSO, iograde 68399-81-5
(R)-(-)-Glycidyl nosylate, 98% 115314-17-5
TES, biograde 7365-44-8
1,1,2,2-Tetrabromoethane 79-27-6
Barium hydroxide octahydrate, reagent ACS, 98+% 12230-71-6
Vinylbenzyl Alcohol, Mixture of Isomers 7732-18-5
Triethyl orthopropionate,98+% 115-80-0
1-Chloro-1-Phenylethane, 97% 672-65-1
Fluorescein isothiocyanate I hydrochloride, 99%, certified 0-01-1
Barium sulfate, extra pure 7727-43-7
Ammonium Persulfate, DNase, RNase and Protease Free 7727-54-0
Benzaldehyde 100-52-7
Phenol, Stabilized, DNase, RNase and Protease free 108-95-2
Acetylsalicylic Acid 99% 50-78-2
Boric Acid 10043-35-3
N,N-Dimethylformamide, DNase, RNase, Protease free 68-12-2
Methyl sulfoxide, DNase, RNase, Protease free 67-68-5
DL-Dithiothreitol, DNase, RNase, Protease Free 27565-41-9
Benzoic acid, p.a. 65-85-0
Benzophenone, 99+% 119-61-9
Benzotriazol-1-yloxytris(dimethylamino) phosphonium 56602-33-6
Benzoyl peroxide, 75%, remainder water 94-36-0
Methylcyclohexane, 99% 108-87-2
(1S)-1-(2-Chlorophenyl)Ethane-1,2-Diol, 95% 0-01-1
m-Toluoyl chloride, 99% 1711-06-4
(-)-Cis-2-Oxabicyclo(3.3.0)Oct-6-En-3-One, 97% 0-01-1
Bismuth(III) oxide 1304-76-3
(S)-(-)-2-(tert-Butoxycarbonylamino)3-phenyl-1-propanol, 98% 66605-57-0
Formamide, DNase, RNase and Protease free 75-12-7
Beeswax, White 8012-89-3
Tin(IV) chloride pentahydrate, 98+% 7646-78-8
5-Bromo-4-Chloro-3-Indolyl-??-D-Galactoside, DNase, RNase and Protease 7240-90-6
Bromocresol Purple, Indicator Grade 115-40-2
Glycerol, DNase RNase and Protease free 56-81-5
Acridine Orange Hemizinc Salt 10127-02-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net