Search   
MSDS 
:
 Normal-heptyl cyanide, 97%
CAS 
:
 124-12-9
SYNONYMS 
:
 Caprylnitrile; Caprylonitrile; Octanonitrile
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 124-12-9 |Octanenitrile | 97 | 204-682-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis.
Skin:
May cause irritation and dermatitis.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Inhalation at high concentrations may cause
CNS depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Remove all sources of ignition.
Absorb spill using an absorbent, non-combustible material such as
earth, sand, or vermiculite. Do not use combustible materials such as
sawdust. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Do not get in eyes, on skin, or on clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames. Do not breathe
vapor.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 124-12-9:
United States OSHA: 5 mg/m3 TWA (listed under Cyanide anion).
Germany: (listed as cyanide anion): Skin absorber
Netherlands: (listed as cyanide anion): 5 mg/m3 MAC (as CN)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Clear
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 198.0 - 200.0 deg C @ 760.00m
Freezing/Melting Point: -45 deg C
Autoignition Temperature: Not applicable.
Flash Point: 73 deg C ( 163.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .8140g/cm3
Molecular Formula: C8H15N
Molecular Weight: 125.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong reducing agents, strong acids, strong
bases.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, cyanide fumes.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 124-12-9: RG9700300
LD50/LC50:
CAS# 124-12-9: Oral, mouse: LD50 = 1764 mg/kg.
Carcinogenicity:
Octanenitrile -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 124-12-9: No information available.
Canada
CAS# 124-12-9 is listed on Canada's DSL List.
CAS# 124-12-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 124-12-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/08/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Acetoxybenzonitrile, 99.5+% 5715-02-6
2-Methylanisole, 99% 578-58-5
4-Bromobenzyl bromide, 98% 589-15-1
Rhodium (II) acetate, dimer, anhydrous, ca. 43 % Rh 15956-28-2
1-Iodobutane, 98%, stabilized over copper 542-69-8
2,5-Dimethyl-p-benzoquinone, 99% 137-18-8
N,N-Dimethylacetoacetamide (Contains Approx. 17 Wt.% Water), 83% (GC) 2044-64-6
4-??4-chloro-3-(trifluoromethyl)phenyl??-4- piperidinol, 97% 21928-50-7
n-Carbethoxyphthalimide, 98% 22509-74-6
Dodecylbenzene sulfonic acid, 97%, mixture of isomers 27176-87-0
Squaric acid dibutylester, 97+% 2892-62-8
2-(Trimethylsilyl-ethanol, 99% 2916-68-9
4-Chloro-3,5-dimethylphenol, 99% 88-04-0
3-O-Methyl-D-Glucopyranose, 99+% 3370-81-8
Tris-(3-(Trifluoromethylhydroxymethylene)-D-Camphorato], Praseodymium 38053-99-5
3-Phenoxybenzaldehyde, 97% 39515-51-0
Sinigrin monohydrate 3952-98-5
alpha-D(+)-Glucose, anhydrous, 99+% 492-62-6
2-Bromo-3'-Methoxyacetophenone, 97% 5000-65-7
3-N-Pentadecylphenol, 90-95% 501-24-6
Hexacosanol 98% 506-52-5
D(-)-Penicillamine, 99+% 52-67-5
Lithium acetate, pure 546-89-4
Cis-Decahydro-1-Naphthol 529-32-8
Sodium Amide, 95% 7782-92-5
1-Benzyl-4-Piperidineacetonitrile, 97% 78056-67-4
2-Ethylphenol, 99% 90-00-6
Poly(dimethylsiloxane) 9016-00-6
2,4-Dichlorobenzylchloride, 99% 94-99-5
Trans-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+% 97945-19-2
Lead(II) Bromide, 98+% 10031-22-8
3,7-Dimethyl-Trans-2,6-Octadien-1-yl Acetate, 98%, Mixture of Isomers 105-87-3
Ethyl Laurate, 99+% 106-33-2
Normal-heptyl cyanide, 97% 124-12-9
2-Chloro-1-Methylpyridinium Iodide, 97% 14338-32-0
Fast Violet B Salt, 99% (uv-vis) 14726-28-4
Ethyl Cis-2-Hydroxy-1-Cyclohexanecarboxylate (>98%) 16179-44-5
2-Bromophenylacetic acid, 98% (titr.) 18698-97-0
3-Aminobenzyl alcohol, 97% 1877-77-6
Uridine 5'-Triphosphate, Trisodium Salt Hydrate, 90% (HPLC) 19817-92-6
Platinum on activated carbon, not reduced, 5% Pt 7440-06-4
4-Bromo-3,5-Difluoroanisole, Mixture of Isomers
Gelatin Multicomponent Trace Element Reference Material (Teg-50-B) 7429-90-5
Gelatin multicomponent trace element reference material (TEG-50-c)
Ion pair sampler kit (low uv)
Ion pair sampler kit
Ready-to-use i scintillator solution (for nonaqueous samples in
Ready-to-use ii scintillator solution (for aqueous samples at
Ready-to-use iii scintillator solution (for aqueous samples at
Ultraviolet Sensitizing Solution

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net