Search   
MSDS 
:
 Ethyl Cis-2-Hydroxy-1-Cyclohexanecarboxylate (>98%)
CAS 
:
 16179-44-5
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 16179-44-5 |Ethyl Cis-2-Hydroxy-1-Cyclohexanecarbo| >98 | 240-315-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 16179-44-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 134.0 - 135.0 deg C @ 39.00mm
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0510g/cm3
Molecular Formula: C9H16O3
Molecular Weight: 172.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 16179-44-5: GU8580000
LD50/LC50:
CAS# 16179-44-5: Draize test, rabbit, eye: 100 mg Severe; Draize
test, rabbit, skin: 550 mg/15D Mild; Oral, mouse: LD50 = >3200 uL/kg.
Carcinogenicity:
Ethyl Cis-2-Hydroxy-1-Cyclohexanecarboxylate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 16179-44-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 16179-44-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 16179-44-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/15/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Acetoxybenzonitrile, 99.5+% 5715-02-6
2-Methylanisole, 99% 578-58-5
4-Bromobenzyl bromide, 98% 589-15-1
Rhodium (II) acetate, dimer, anhydrous, ca. 43 % Rh 15956-28-2
1-Iodobutane, 98%, stabilized over copper 542-69-8
2,5-Dimethyl-p-benzoquinone, 99% 137-18-8
N,N-Dimethylacetoacetamide (Contains Approx. 17 Wt.% Water), 83% (GC) 2044-64-6
4-??4-chloro-3-(trifluoromethyl)phenyl??-4- piperidinol, 97% 21928-50-7
n-Carbethoxyphthalimide, 98% 22509-74-6
Dodecylbenzene sulfonic acid, 97%, mixture of isomers 27176-87-0
Squaric acid dibutylester, 97+% 2892-62-8
2-(Trimethylsilyl-ethanol, 99% 2916-68-9
4-Chloro-3,5-dimethylphenol, 99% 88-04-0
3-O-Methyl-D-Glucopyranose, 99+% 3370-81-8
Tris-(3-(Trifluoromethylhydroxymethylene)-D-Camphorato], Praseodymium 38053-99-5
3-Phenoxybenzaldehyde, 97% 39515-51-0
Sinigrin monohydrate 3952-98-5
alpha-D(+)-Glucose, anhydrous, 99+% 492-62-6
2-Bromo-3'-Methoxyacetophenone, 97% 5000-65-7
3-N-Pentadecylphenol, 90-95% 501-24-6
Hexacosanol 98% 506-52-5
D(-)-Penicillamine, 99+% 52-67-5
Lithium acetate, pure 546-89-4
Cis-Decahydro-1-Naphthol 529-32-8
Sodium Amide, 95% 7782-92-5
1-Benzyl-4-Piperidineacetonitrile, 97% 78056-67-4
2-Ethylphenol, 99% 90-00-6
Poly(dimethylsiloxane) 9016-00-6
2,4-Dichlorobenzylchloride, 99% 94-99-5
Trans-2-Amino-4-Cyclohexene-1-Carboxylic Acid, 98+% 97945-19-2
Lead(II) Bromide, 98+% 10031-22-8
3,7-Dimethyl-Trans-2,6-Octadien-1-yl Acetate, 98%, Mixture of Isomers 105-87-3
Ethyl Laurate, 99+% 106-33-2
Normal-heptyl cyanide, 97% 124-12-9
2-Chloro-1-Methylpyridinium Iodide, 97% 14338-32-0
Fast Violet B Salt, 99% (uv-vis) 14726-28-4
Ethyl Cis-2-Hydroxy-1-Cyclohexanecarboxylate (>98%) 16179-44-5
2-Bromophenylacetic acid, 98% (titr.) 18698-97-0
3-Aminobenzyl alcohol, 97% 1877-77-6
Uridine 5'-Triphosphate, Trisodium Salt Hydrate, 90% (HPLC) 19817-92-6
Platinum on activated carbon, not reduced, 5% Pt 7440-06-4
4-Bromo-3,5-Difluoroanisole, Mixture of Isomers
Gelatin Multicomponent Trace Element Reference Material (Teg-50-B) 7429-90-5
Gelatin multicomponent trace element reference material (TEG-50-c)
Ion pair sampler kit (low uv)
Ion pair sampler kit
Ready-to-use i scintillator solution (for nonaqueous samples in
Ready-to-use ii scintillator solution (for aqueous samples at
Ready-to-use iii scintillator solution (for aqueous samples at
Ultraviolet Sensitizing Solution

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net